Ask a tradesperson
Plastering
Is there an easy way to remove artex?
We have some Artex in our living room that we would like to get rid of or cover. It is quite thick in places (about an inch) as it was put on in a style that looks like butter spread on a slice of toast. What would be the easiest way of getting rid of the Artex it or hiding it? Could we sand it down it the thickest places and then put up a thick coat of fresh plaster over the top to hide it? Or should we sand it right back and then skim the wall? Or is there a product that can be bought specifically for removing artex?
21 Answers from MyBuilder Plasterers
Best Answer
Wolverhampton • Member since 2 Jun 2008 • 5 jobs, 60% positive feedback
For artex ceilings we always overboard. Its a little more expensive but i could gaurentee there wouldn't be future problems.This ways cuts down on the dust and not having the worry of artex coming lose when skimming.
Answered 17th Feb 2011
Long Eaton • Member since 1 Jun 2008 • 4 jobs, 100% positive feedback
mmmmmm.....everyones talking about what to do over a ceiling,yet question poster is asking about a wall :/
Scissorsister,are you absolutely sure it's artex?
Could be just normal finish plaster trowelled off 'old english'
Either way,get yourself some Febond Blue-Grit.
This is an excellent plaster bonding agent and works particulaly well if your wall has a painted surface as it contains a fine aggregate and will give a mechanical 'key' for the plaster.
Thistle Bond-it is also suitable but is at least twice the price of Febond.
A 5ltr tub will be enough for a decent sized wall.
Roller this on straight from the tub,don't dilute it with anything,then leave it to dry thoroughly for a minimum of 24 hours.
It's just like very thick,textured paint so it's easy to do yourself and will save you quite a bit on a plasterer doing it for you.
It's also coloured blue so very easy to see where you apply it.
Then hire yourself a decent spread to re-plaster it.
If he/she knows their stuff,they will know what to do.
Hope this helps.
Carl.
Answered 17th Feb 2011
Kingsclere • Member since 26 Oct 2008 • 44 jobs, 100% positive feedback
If the artex is old it could contain asbestos! Scraping or sanding it could make it airbourne.
In the past I have used a industrial wall paper steamer to remove it (solid walls only) this will make it wet and prevent dust, always double bag and tape close the waste and dispose of in the correct waste facility.
I would realy recommend leaving it and getting the artex plastered over.
Answered 17th Feb 2011
Herne Bay • Member since 15 Oct 2008 • 9 jobs, 100% positive feedback
Hi there
boarding over the WALL? He He. 2 coats of unibond (1 part unibond 5 parts water as a mix) and then either bond the wall first then unibond again before the finish coat or knock the artex lumps off and then use multifinish, thicker than a normal mix and a couple of coats to follow to give a smooth finish, ive plastered over more artex than i care to mention, a good end result every time and ive been plastering for 22 years
kind regards
Dave
Answered 16th Mar 2012
Edinburgh • Member since 6 Jan 2015 • 7 jobs, 100% positive feedback
Do not disturb artex unless it has been tested and you are positive it does not contain asbestos! No exposure to asbestos dust particles is safe. Mesothelioma and asbestosis are horrible cancerus diseases caused by asbestos, on average killing 12000 to 15000 people in the US every year.
The easiest/safest soution is to get a plasterer to coat your wall/ceiling with PVA or Febond blue grit depending on how glossy your artex is. Apply a straightening coat of bonding then a skim of multi finish.
Job done!
Matt Smith, Smith Plastering Services
Answered 27th May 2015
Kent • Member since 13 Sep 2010 • 63 jobs, 98% positive feedback
if the celling is sound. you would be better off giving the artex a coat of bonding or hardwall first. then give it a skim. because if you just use plaster it will blow in a shorter time. roy
Answered 16th Mar 2012
Wigan • Member since 26 Oct 2007 • 7 jobs, 100% positive feedback
The best way to eliminate any future problems is to overboard the ceiling. You could bond and then skim but problems may arise in the future.
Any artex used up until around the year 2000 could contain asbestos. Do not scrape or sand.
Answered 17th Feb 2011
Cornwall • Member since 11 Feb 2011 • 2 jobs, 100% positive feedback
If you choose to cover this over with board or plaster please ensure this information is transferred to future owners or any tradespeople you may have working in that vacinity. Somebody in the future could drill a hole in the ceiling and inhale asbestos particles. The best thing to do is have a sample checked so you know for sure either way.
Answered 17th Feb 2011
Brighton • Member since 16 Aug 2010 • 157 jobs, 99% positive feedback
Bond the artex ,then skim it .it's as simple as that
Answered 16th Mar 2012
Ivybridge • Member since 14 Jul 2008 • 69 jobs, 100% positive feedback
Hi scrape all the high spots off and PVA 2 times , then skim with plaster. If the artex is a thick type of pattern you may need to give it a coat of bonding first
All the best Wayne
Answered 17th Mar 2012
Aylesbury • Member since 30 May 2008 • 39 jobs, 97% positive feedback
Speak to your insurance company, they may test the artex for asbestos, and have a firm come in and remove it and finish it, and then they may not.
Regards Fredy
Answered 26th Feb 2011
Leiston • Member since 19 Nov 2009 • 4 jobs, 100% positive feedback
Hello
Without knowing the area of your ceiling and the condition its difficult to say. If your ceiling is fine and not falling down then we would knock off any protruding areas of artex and PVA the whole celing a couple of times and then apply a thicker first coat of thistle and a good second coat to cover and finish. leaving you with a smooth ceiling.
Hope this helps.
Answered 16th Mar 2012
Croydon Cr7 8Lw • Member since 16 Apr 2009 • 5 jobs, 100% positive feedback
Hello,under normal circumstances it should be possible to seal the surface and skim-over the artex but i think the patern/texture you have is too thick. I don't like the idea of over-boarding because regardless of whether you batten and board or stick the boards to the wall-it will reduce the size of your room and it seems like a sledge-hammer to a pea-nut.A good plasterer would probably be able to knock-off the artex lumps,seal and plaster-but some bonding may be necessary.Regards Barry(finbar)
Answered 16th Mar 2012
Doncaster • Member since 10 Nov 2008 • 102 jobs, 97% positive feedback
Best way to deal with Artex walls is to apply two coats of pva followed by two coats of skim. No problems should arise if done properly. Hope that helps. Regards, Paul.
Answered 19th Jun 2013
Cheadle • Member since 10 Feb 2011 • 318 jobs, 99% positive feedback
Yes over board the ceiling, if you are not confident skimming it, apply a dry line tape, rub it down and then paint it. This way there is no problem with dust, asbestos and paying for a plasterer to skim it. job done
Answered 17th Feb 2011
Yeahi agree with a lot of people on here, i suppose there are a few diferent ways of doing this type of job. Bonding, Boarding, or jus skim (depending on thikness etc) if you are going to do skim, make sure once your 1st coat as gone on, make sure this coat stiffens up a little, then apply the second, otherwise its a bit like thick goey c lay, and will be difficult to cover. (the 1st coat will take out the depth of the artex, 2nd to make it flat and paintable)
Answered 18th Feb 2011
Byworth Plastering Services of York
York • Member since 7 Jul 2008 • 2 jobs, 100% positive feedback
Why dont you just overboard it and skim the artex !
Answered 16th Mar 2012
KEVIN HUNTERPLASTERING SERVICES
Newcastle Upon Tyne • Member since 13 Apr 2009 • 124 jobs, 100% positive feedback
Hi scissor sister[ 2 options ] apply pva solution bond & skim, fine stipple, heavy artex cover bark pattern or similar little more expensive option overboard & skim.kev
Answered 16th Mar 2012
Manchester • Member since 16 Sep 2014 • 16 jobs, 94% positive feedback
My response is do not apply anything that's going to weaken the original plaster if it's not in a stable condition why on earth would you consider putting extra weight on it and allow gravity to make it fail in other words it depends on the existing layer and if its sound then you can seal it and apply bonding and then a skim coat
Answered 17th Sep 2017
London • Member since 4 Apr 2018 • 37 jobs, 100% positive feedback
Firstly it can be “steamed” off using a wallpaper steamer. This can be a very messy and also very slow process. It cannot be done at speed or with the steam plate left in one area too long…if it is, there is a possibility of damaging the ceiling or wall behind it and also the risk that the artex will liquefy and run everywhere
Answered 8th Apr 2018
Related Questions
-
Is there an easy way to remove polystyrene ceiling tiles
Been up there since the 70's
-
What is the best way to remove a suspended ceiling?
In our kitchen we have a suspended ceiling which leaves a void of around a foot between it and the original ceiling. The whole...
-
Is there an easy way to remove tiles on tiles. It's a bathroom that being retiled.
I'm retiling the bathroom but want to remove both sets of old tiles as I'm tiling beyond the existing tiles.
-
Trying to remove tiles tiled over old tiles - is there an easy way?
All the tutorials and videos online make it look easy to remove old tiles (editing is a thing I guess). We're trying to do the...
Post your job to find high quality tradespeople and get free quotes
Question Categories
- All Questions
- Architectural Services
- Bathroom Fitting
- Bricklaying
- Carpentry & Joinery
- Carpet & Lino
- Central Heating
- Chimneys & Fireplaces
- Conservatories
- Conversions - General
- Damp Proofing
- Demolition & Waste Clearance
- Driveways
- Electrical
- Extensions
- Fascias, Soffits & Guttering
- Fencing
- Gas Work
- Groundwork & Foundations
- Handyman
- Hard Flooring
- Insulation
- Kitchen Fitting
- Landscape Gardening
- Locksmiths
- Loft Conversions
- New Builds
- Painting & Decorating
- Plastering
- Plumbing
- Restoration & Refurbishment
- Roofing
- Security Systems
- Stonemasonry
- Tiling
- Tree Surgery
- Windows