How Much Does an In-Ground Pool Cost?

Exterior siding typically costs between $5,000 to $14,050, including material and installation. You'll pay less for a material like aluminum, which costs between $2 and $5 per square foot, while brick siding ranges in cost from $9 to $28 per square foot. Common siding materials like vinyl or engineered wood typically range between $3 and $12 per square foot.

Find out how much your project will cost.

Updated May 18, 2022

Written by HomeAdvisor.

Are you considering an in-ground pool as the warm months come upon us? A watery oasis makes for an attractive backyard focal point that also adds home value. The cost of installing an in-ground pool is between $22,367 and $81,180, with an average of $49,779.

Several variables factor into the price of installing an in-ground pool. Materials are the highest cost for your project, but the pool size, shape, and design will also determine the total project price. This guide will explore these decisions and costs in depth.

Select your Siding project

Technician repairing air conditioner
Repair an AC Unit
(56,137 projects)
$393 Average National Cost
professional repairing a furnace in basement
Repair a Furnace
(26,397 projects)
$311 Average National Cost
A nice living room with AC
Install an AC Unit
(22,550 projects)
$5,858 Average National Cost
vacuum hose cleaning vent in wooden floor of home
Clean Ducts & Vents
(20,260 projects)
$378 Average National Cost
chimney sweeping professional on roof cleaning chimney
Clean a Chimney
(19,188 projects)
$252 Average National Cost
A furnace installed in the back entrance of a house
Install a Furnace
(11,143 projects)
$4,705 Average National Cost
new wood ceiling fan with light
Install a Ceiling Fan
(8,929 projects)
$247 Average National Cost
A couple cooking together
Install or Repair Gas Pipes
(8,272 projects)
$566 Average National Cost
fire in a modern rebuilt fireplace
Repair a Fireplace or Woodstove
(7,950 projects)
$566 Average National Cost
batt and roll insulation installed by professional in protective gear
Install Batt, Rolled, or Reflective Insulation
(6,863 projects)
$1,788 Average National Cost
technician repairing a home boiler system
Repair a Boiler
(4,828 projects)
$409 Average National Cost
heat pumps installed on the side of a brick house
Install a Heat Pump
(4,366 projects)
$5,897 Average National Cost
heat pump being repaired on the side of house
Repair or Maintain a Heat Pump
(3,829 projects)
$395 Average National Cost
HVAC return air wall register vent
Install Ducts & Vents
(3,645 projects)
$1,192 Average National Cost
exterior attic fan vent on home near roof line
Install an Attic Fan
(2,669 projects)
$597 Average National Cost
radiant heating system in floor being repaired
Repair a Radiant Heating System
(2,514 projects)
$1,284 Average National Cost
digital home thermostat on wall
Install a Thermostat
(2,132 projects)
$176 Average National Cost
new solar panels installed on roof of home
Install Solar Panels
(2,117 projects)
$26,208 Average National Cost
home basement with new boiler system installed
Install a Boiler
(1,667 projects)
$5,815 Average National Cost
An attic fan as seen from the exterior of the house
Repair an Attic Fan
(1,445 projects)
$295 Average National Cost
handyman repairing a home ceiling fan
Repair a Ceiling Fan
(1,430 projects)
$140 Average National Cost
swamp cooler on the exterior of a home
Repair a Swamp Cooler
(1,161 projects)
$192 Average National Cost
A warm and cozy stone fireplace
Install a Fireplace or Wood Stove
(1,051 projects)
$2,481 Average National Cost
window of home with a window unit air conditioner installed
Install a Window Air Conditioner
(1,048 projects)
$313 Average National Cost
technician repairing whole house air cleaner
Repair a Whole House Air Cleaner
(993 projects)
$420 Average National Cost
gas boiler in basement of house
Install a Gas Boiler
(931 projects)
$5,793 Average National Cost
home humidifier installed in ductwork in home
Install a Humidifier
(854 projects)
$576 Average National Cost
technician repairing a home digital thermostat
Repair a Thermostat
(763 projects)
$210 Average National Cost
homeowner installing weather stripping on window
Install Weather-stripping
(665 projects)
$278 Average National Cost
A window AC unit next to a bougainvillea
Repair A Window Air Conditioner
(591 projects)
$245 Average National Cost
technician repairing solar panel on roof
Repair Solar Panels
(527 projects)
$725 Average National Cost
professional installing a central air cleaner filter
Install a Whole House Air Cleaner
(520 projects)
$2,483 Average National Cost
swamp cooler being installed on roof of house
Install a Swamp Cooler
(508 projects)
$2,540 Average National Cost
fire burning in a pellet stove
Install a Pellet Stove
(399 projects)
$2,172 Average National Cost
Family on living room floor by table
Install an Electric Baseboard or Wall Heater
(302 projects)
$810 Average National Cost
a wall heater on brick interior of home
Repair an Electric Baseboard or Wall Heater
(291 projects)
$282 Average National Cost
homeowner changing filter in electric furnace in their home
Install an Electric Furnace
(270 projects)
$4,405 Average National Cost
homeowner changing water container in home dehumidifier
Repair a Humidifier
(256 projects)
$246 Average National Cost
geothermal heating system installed in basement of house
Install a Geothermal Heating or Cooling System
(235 projects)
$13,881 Average National Cost
technician repairing a commercial refrigeration system at maintenance shop
Repair a Refrigeration System
(226 projects)
$273 Average National Cost
geothermal heating system in basement of house
Repair a Geothermal Heating or Cooling System
(219 projects)
$621 Average National Cost
radiant heating system is being installed under floor in home
Install a Radiant Heating System
(88 projects)
$3,768 Average National Cost
roll of galvanized steel sheet metal fabricated to specifications
Fabricate Sheet Metal
(85 projects)
$1,001 Average National Cost
refrigeration system in commercial kitchen
Install a Refrigeration System
(68 projects)
$477 Average National Cost

In-Ground Pool Cost Calculator

Let's calculate cost data for you. Where are you located?

Where are you located?

National Average $49,779
Typical Range $22,367 - $81,180
Low End - High End $4,700 - $150,000

Cost data is based on actual project costs as reported by 5,012 HomeAdvisor members.

The national average to build an in-ground pool is $55,215, ranging from $18,400 to $110,000

In-Ground Pool by Material

Depending on the type of material you choose, you'll spend anywhere from $20,000 to $65,000 or more to install a pool. The wide range reflects three in-ground types: vinyl, fiberglass, and concrete. Each of these pools has similar initial turnkey pricing, but there are significant differences in the lifetime cost.

Material Average Price Range Description
Vinyl $20,000 – $40,000 $1,100 – $1,700 annual upkeep; replace liner every 10 years
Fiberglass $20,000 – $60,000 $500 – $1,500 annual upkeep; lasts 25+ years
Concrete $35,000 – $65,000 $2,700 – $4,000 annual upkeep; lasts 50 – 100 years

Vinyl Pool 

Installing an in-ground vinyl pool runs between $20,000 to $40,000. Over 10 years, expect maintenance to cost anywhere from $11,000 to $17,000. Here are some of the pros and cons of choosing a vinyl in-ground pool.

  • Versatile, nonabrasive, and easy maintenance: It comes in various shapes and custom designs.

  • Easy to clean: Many owners handle the cleaning themselves, which can save the cost of hiring a pool cleaner near you. 

  • Sustainable: You won't need to use chemicals often because algae can’t grow easily on vinyl.

  • Considered lower end: You have to replace the liner every 10 years. 

Fiberglass Pool 

Delivering and installing a fiberglass pool costs between $20,000 to $40,000, including a basic deck. Maintenance on fiberglass pools costs between $5,000 to $15,000 over 10 years. Here are the pros and cons of choosing a fiberglass in-ground pool.

  • Premade: The pre-formed shells insert into a leveled hole, which has been pre-dug to match the shell shape. 

  • Smaller than concrete: The shell is usually no more than 16 feet across. Considering that you don’t need an acid wash or liner replacement, the smaller size can feel like an acceptable tradeoff for most homeowners. 

  • Easy to clean: Compared to other pool types, they might be the easiest to clean and maintain, and there are no special requirements for the shell. 

  • Tricky installation: You'll need an experienced contractor to avoid common problems, including everything from improper water circulation to collapsed walls.

  • Sensitive coating: Fiberglass pools have a smooth gel coating. Poor pH or alkalinity levels and improper calcium balances often result in a coating that fails in a few years.

Gunite, Shotcrete, or Concrete Pool 

The initial price of installing a gunite, shotcrete, or concrete pool runs between $35,000 and $65,000. Expect to pay an additional $27,000 to $40,000 over 10 years. The upkeep of a concrete in-ground pool requires acid washing and replastering. Often the largest pool, they also require more electricity and chemicals to keep them clean and swimmable. Here’s more information about a concrete pool.

  • Gunite and shotcrete: Both are concrete types. The only difference is the water ratio involved and how it’s applied. Both use less water than form-set concrete and are applied using a pressurized spray.

  • Acid wash: Plan to get one every three to five years. Concrete is very durable, but it can also be a haven for mold and algae if not properly maintained. The acid wash will strip a small layer away, which means that the shell will need to be replastered at some point.

Get Quotes From In-Ground Pool Professionals
Get Estimates Now

In-Ground Pool by Size

A typical pool measures about 14-by-28 or 392 feet with a depth of around 6 1/2 feet. You'll spend anywhere from $50 to $125 per square foot or $19,600 to $49,000. 

Small pools—like plunge, spool, and cocktail—will cost you $10,000 to $25,000 or more. They generally measure about 10-by-20 feet and are usually 5 1/2 to 7 feet deep. If you're uncertain about the size, here are a few notes to consider:

  • According to the Red Cross, it recommends a depth of at least 9 feet if you want to dive in head-first. This size will start at around $20,000. 

  • Pools 18-by-36 feet or larger are often too large for suburban homes.

  • The pool depth affects the price. The deeper the hole, the more materials are needed. Expect deeper designs to land closer to $125 per square foot.

In-Ground Pool Size Average Price Range
10x20 $10,000 – $25,000
12x24 $14,400 – $36,000
14x28 $19,600 – $48,750
15x30 $22,500 – $56,250
16x32 $25,600 – $64,000
18x36 $32,400 – $81,000
20x40 $40,000 – $100,000

In-Ground Pool by Shape and Design

The most cost-effective in-ground pools, either custom or prebuilt, are those with the most standard shape, like a rectangle or oval. Below are three of the most common designs: 

Zero-Entry Pool

Zero-entry pools, also called beach entry, have one or more sides that gently slope up to meet the land. Instead of steps to enter the water, you walk down a slope, just like at the beach. The cost for a zero-entry pool is in the same range as a standard one.

Lagoon Pool 

Lagoon styles are usually a free-flowing, asymmetrical design meant to create the feel of a tropical retreat. These luxurious-looking pools cost more because of the custom designs and add-ons such as waterfalls, grottos, and tropical landscaping. A lagoon pool can cost anywhere from $50,000 to $150,000.

Semi In-Ground Pool 

Most of the pool is still in-ground with a semi in-ground pool, but part of it will be raised a few feet or more. Semi in-ground pools cost $6,800 to $25,000, including labor and materials. Below is a chart detailing semi in-ground costs in a basic round shape.

Size Average Price Range
12x52 $2,300 – $4,00+
15x52 $2,400 – $4,500+
21x52 $2,700 – $5,400
15x24x52 $3,500 – $6,700
17x32x52 $4,800 – $7,900

In-Ground Pool Installation

Labor will account for about 33% of the total project cost, or about $55 per hour. Some of the main reasons it costs so much to install an in-ground pool are the necessary excavation, dirt disposal, equipment, pool shell, and any essential landscaping. Below are some of the most common costs.

Project Average Cost
Permit $450 – $1,800 per permit
Excavation $1,500 – $5,000
Dirt disposal $13,000
Equipment and crane rental $2,400 – $2,800
Landscaping $1,500 – $5,200 (up to $20,000 for significant projects)
Pool maintenance $100 – $200 per month

In-Ground Pool Additional Costs

All in-ground pools can come with optional, additional costs, if you include:

  • Saltwater

  • Lighting

  • Heaters

  • Hot tubs

  • Landscaping 

  • Decking

  • Water features

  • Fencing

  • Fireplaces

Saltwater Pool

Installing a saltwater swimming pool costs about $1,000 to $2,500 more than average. However, it costs less to maintain a saltwater system versus using chlorine. Some homeowners may prefer saltwater pools because they don't rely on added chemicals to keep the water clean. Instead, a chemical reaction breaks down the salt in the water to generate chlorine. This leads to a reduction in eye irritation and smell. Check out our saltwater vs. chlorine pool guide to learn more about how these two options compare.

Expect to pay less than $100 per year for the salt and chemicals to maintain your saltwater swimming pool. Compare this to $300 to $800 yearly for the chemicals to maintain a traditional chlorine pool. But monitoring the salt levels is very important, and a local pool installer can help you pick the right system and help install it properly. Homeowners should budget an additional $200 to $700 every three to five years to replace the salt cell. The electricity to run a saltwater system will also add $35 to $50 to your yearly power bill.

Get Accurate Quotes From Local Pool Builders
Get a Quote

Lighting

Lights average $100 to $300 each for 50-watt built-in lights. Lighting can set the mood and provide some safety for night swimming. Traditional incandescent lights and energy-efficient LED lights are available for various prices, depending on features such as light color, floating or fixed, and output.

Heater

A pool heater installation costs $1,500 to $4,000, and the operating cost will range from $100 to $600 monthly. 

Hot Tub

A basic hot tub can add $5,000 to $8,000 to your base price. If you need excavation service and customization, installing a built-in hot tub costs $15,000 to $20,000.

Backyard and Landscaping

Landscaping costs range from $1,500 to $5,200. However, the price can go up to $20,000 for significant and involved landscaping.

  • Retaining walls cost about $3,200–$13,000 to create a level yard to keep soil and sediment from eroding into your pool or onto your patio or deck. Retaining walls also provide additional support to slides and water features.

  • Semi in-ground pools cost more than an in-ground unit for a 12-by-24-foot model. They can be built directly into slopes and give you the opportunity to install an infinity edge, costing an additional $15,000–$20,000.

  • The cost to reslope your land is about $1,000–$3,000. Reuse the excavated dirt to level your yard, saving $1,000 or more on removal fees.

  • Landscaping rocks cost $460–$1,000. Available in natural and artificial, the natural look of stone makes for a relaxing escape, with the price heavily depending on the type, amount, and configuration.

Pool Deck

Pool decks and coping cost $3,000 to $12,000. If you choose a more elaborate design or expensive material, the fees will increase.

Waterfall or Water Feature

A waterfall installation costs $1,500 to $5,000 or more, and elaborate ones can reach $30,000. Budget 10% to 15% of your total project for a water feature, which can create an attractive focal point and goes well with elevated hot tubs and spas.

Water Slide and Diving Board

On average, water slides can cost $1,000 to $14,000, depending on the design, manufacturer, and features such as water jets. Diving boards can cost $300 to $5,000 on average. Installation pricing depends on your type and local codes and requirements.

Fencing or Enclosing Your Pool

Your homeowners association will likely require you to fence in your pool. Remember to always install childproof locks and latches for added safety.

  • Fence installation costs $13–$50 per linear foot, or a total of $1,500–$5,000.

  • Gates add $200–$350 each.

  • Removable fences cost $100–$500 per panel and include locks and latches to keep them in place.

  • Pool covers cost $700–$2,200 with installation. A higher-end option with automatic and security options will be between $1,000–$15,000.

  • Pool enclosures cost between $5,000–$15,000. Installing a pool enclosure will extend your swimming season because they retain some heat and keep the water cleaner for longer.

Fireplace

Outdoor fireplaces cost between $1,500 and $20,000, including installation and depending on the materials you choose. Expect to pay $300 to $1,000 for a contractor to install a premade fireplace kit. Custom projects will cost much more, but anticipate about $70 to $150 per hour of labor. 

Material Average Price
Metal $100 or more
Brick $1,500 – $20,000
Stone $1,500 – $20,000

In-Ground Pool Maintenance

Pool maintenance costs anywhere from $100 to $200 per month. Maintenance includes skimming the water and adding chemicals. The chemicals for a fiberglass pool maintenance cost about $175, about $400 for a vinyl pool, and $750 for a concrete one.

Additional costs will incur if a pool service pro near you needs to make repairs or open or close the pool for the season, which will cost $300 to $500 on average. Another cost to factor in is liability insurance, which can cost around $25 per month. Lastly, don't forget to factor in electricity. Your electricity bill can add about $65 to $100 per month to the average swimming pool. Expect to pay more if you want to heat your pool.

Consult With a Local In-Ground Pool Builder
Find Pros

FAQs

What's the most affordable in-ground pool shape?

The shape of your pool will depend on the shape of your yard, but usually, an oval- or rectangle-shaped pool is the most affordable. These shapes remain the most affordable because they’re simpler than others to install. Essentially, the more corners and curves, the more you’ll pay. The same goes for complex shapes dug or installed into challenging terrain or slopes.

How much does an underground pool liner cost?

Generally speaking, your cost will be between $1,000 and $2,500 for the installation alone. Add materials, and you could end up above $4,000 to install a new in-ground pool liner. The installation cost will range widely depending on the pool size, shape, and condition. So will the time of year the local pool liner installer does the work. If you choose a thicker liner, it’ll last longer and won’t tear as easily, but it’ll also cost you more and be harder to install.

Vinyl liners are essential for any pool, in-ground or above-ground, that doesn’t already provide waterproofing, like concrete, gunite, or fiberglass pools.

Do in-ground pools add to the home value?

In warmer climates, a pool is considered a plus for your property and can increase the resale value by up to 7%. For example, adding a pool to a $300,000 house will increase the value by up to $21,000.

How long do pools last?

Swimming pools with a concrete shell will last more than 25 years, but they’ll need to be resurfaced every 10 years. Fiberglass pools, however, last the longest of any pool, generally stretching to 30 years. Or more. No matter which pool type you choose, maintenance and proper care go a long way in extending your pool’s lifespan.

How long does it take to install an in-ground pool?

Installing an in-ground pool takes a bit of time. Be prepared to wait at least three to six months for a concrete pool. A vinyl pool will have a shorter installation period, anywhere from four to eight weeks. The installation time for a fiberglass pool is the shortest, taking anywhere from two to four weeks for a local fiberglass pool installer.