Electrical Panel Location Rules to Follow and Clearance Requirements

Elisa Greenberg
Written by Elisa Greenberg
Updated October 3, 2022
Family toasting drinks
Photo: Iriana Shiyan / Adobe Stock

Highlights

  • You must contact your utility company to let them know you have a preference on the location of the electrical panel when building a home.

  • Place your electrical panel in an accessible, reachable, and safe location.

  • The garage and basement are often the two best locations, as they’re accessible and out of sight. 

  • Hallways, entryways, utility rooms, and storage rooms can also be good locations, but avoid clothing closets.

  • The cost to move an electrical panel is $1,500 to $2,000 on average.

Get quotes from up to 3 pros!
Enter a zip below and get matched to top-rated pros near you.

If you’ve ever had a circuit breaker trip, you know how convenient it is to have your electrical panel in an easy-to-reach location. But you must follow electrical panel location rules when choosing a spot—even if incorporating them into interior design is challenging—and you can’t cover them without breaking fire codes. To choose the best location for an electrician panel, consider which rooms you have available and whether you can move your panel to a new spot.

What Are the Codes Regulating Electrical Panel Locations? 

Before you install or relocate your electrical panel box, you’ll need to follow the regulations set forth by the National Electric Code (NEC). These standards provide safety guidance for preventing fires. Consider these requirements:

Accessible

Make sure the area around your electrical panel is clutter-free. Move any boxes or objects that obstruct your view.

  • Ensure a washer or dryer doesn’t block your electrical panel.

  • Place your panel box in a large, walkable room (no tiny crawl spaces).

  • Never block the electrical panel—especially if you’re storing large items or doing home remodeling.

Reachable

Position your electrical panel so that all the adults in your household can reach every circuit breaker. The NEC advises that the highest circuit breaker should not exceed a height of 6 feet and 7 inches.

Available to All Occupants

It’s important for everyone living in your home—and emergency professionals—to have immediate access to your electrical box. 

  • Don’t place any locks on the door to your electrical panel or the room housing the electrical panel.

  • If you have an outdoor electrical panel, ensure it’s free of snow and debris.

  • Make sure everyone in the home knows the location of your electrical box. You can perform a mock fire drill with your family so everyone knows the ins and outs of your electrical panel. 

Safe From Damage

To keep your electrical panel in good working condition, don’t place the box near water or high humidity. These elements can damage electrical boxes; the best environment is a clean, dry, and fresh space.

Away From Flammable Materials

The NEC prohibits the installation of electrical panels within clothing closets. Clothing, mothballs, shoe polish, plastic containers, and exposed bulbs are highly flammable—and all of these are commonplace in clothing closets.

The Best Locations for Your Electrical Panel

There are a few ideal places for electrical panels that keep them accessible and out of areas you want to design and decorate. The top two choices are the basement and the garage. Both allow a pro to access the wiring and keep the panel out of high-traffic areas, like the family room or bathroom. 

Not every house has a basement or garage, so you can consider a few other options that keep a panel hidden while still keeping it accessible.

  1. Basement

  2. Garage

  3. Utility rooms

  4. Storage rooms

  5. Entryways

  6. Hallways

Entryways and hallways are more prominent locations than a garage or basement—but they’re rarely the centerpiece of a home—and they’re usually the areas you skip over when you’re giving someone a tour.

Be Aware of Electrical Panel Location Restrictions

A general view of a hallway
Photo: John Keeble / Moment / Getty Images

Restrictions ensure that your electrical panel is always in an accessible area and limit the risk of fire or electrical shock. This means no putting your electrical panel in:

  • Bathrooms

  • Bedrooms

  • Home exteriors

  • Bedroom closets

  • Above the stairs

  • Pantries

  • Cubbies

You can’t cover or put an electrical panel near flammable materials either. So even after you’ve decided where you want your electrical panel, you’ll still need to limit the items around it. Review your local restrictions for any additional guidance. 

Because extending or shortening wires throughout the home is a significant undertaking, you’ll likely need a permit from your local municipality. You’ll also need to contact the electric company to ensure the move is safe. That way, they’ll know to shut off power during the work, so no one’s in for a “shock.” They may even insist on bringing out their own licensed electrician for the job.

What Are the Electrical Panel Clearance Requirements?

Before choosing your final electrical panel location, be aware of the following NEC clearance requirements for working space:

  • Three feet of clearance from the front of the electrical panel

  • At least 30 inches of clearance on both sides of the electrical box

  • A height of at least 6 feet and 5 inches

  • The electrical box height should be 4-feet tall (off the ground) at a minimum—with an average height of 5–6 feet

  • The panel door needs to open to a 90-degree angle

  • Ensure the electrical meter is close to the electrical panel

  • Emergency lighting is available in case of a power outage

If installing an outdoor panel, weatherproof against corrosion, water, snow, and wind damage

Installing a Breaker Box vs. Moving a Panel in an Existing Home

A circuit breaker box, or electrical panel, takes the electricity provided by your utility company and sends it throughout your home as you need it. Because the utility company provides the electricity, they usually have the initial say on where it goes in the home during the building stage. 

If you’re building your home, you should reach out to the utility company and ask where you can place it, giving you a little more control over the final location of the circuit breaker box.

You’ll need to consider your home's current wiring and where you want the electrical panel in an existing home. A local electrician will have to shorten the wires or extend them to reach the new location, which costs time and money. You also need proper illumination in the area to ensure you can see the numbers and flip the correct breaker when necessary. 

Cost to Move an Electrical Panel

The cost to move an electrical panel is around $1,500 to $2,000 on average. Replacing your circuit breaker box costs an additional $1,150. You may want to upgrade to a 200-amp service to give your home a little more juice, which will cost you around $1,350 on average.

Need professional help with your project?
Get quotes from top-rated pros.