Top Insulation Contractors in Minneapolis, MN
Find your local pros
How It Works
- Answer a few questions about your home project.
- Within seconds, get matched with top-rated local pros.
- Compare quotes and choose the best pro for the job.
Featured Service Pros
Areas Of Expertise: Insulation
"Very professional hired them for attic installation. Excellent customer service very prompt. Would highly recommend them for their services"
Tonette L. in July 2022
Areas Of Expertise: 20+ Years Experience, Blown-In Insulation
About us: "Customer satisfaction is what determines our success, which is why we take a hands-on approach. When interacting with Above All Insulation, Inc., you'll notice that we're particularly focused on the principles of quality workmanship, timely completion, competitive pricing and integrity in all our business dealings. We combine knowledge and research with our extensive practical experience to ensure a specialized approach for your project needs. Contact us today for a fair and accurate estimate of your project. We look forward to adding you to our long and growing list of happy customers."
Areas Of Expertise: Roofing, Insulation, Siding
"I am very pleased with the job. Everything was completed professionally, on time and as quoted. Received great advice on how to improve upon my choices. I would recommend Total Home Exteriors to everyone."
Rob J. in December 2012
Service Pros
"The crews were very thorough in their work in evacuating all the attic insulation and replacing the baffles. All can light enclosures were resealed and wire intrusions were sealed. The installation crew was exacting in their application bringing the R rating up to R49 (16â ). Both crews cleaned up all work areas well. When the dumpster was removed the area was spotless! It is well worth the piece of mind knowing that the house is 100% in the attic insulation. Good by ice dams!"
Gary M. in February 2023
Areas Of Expertise: soundproofing, Batting insulation, Blow in insulation , and 1 more
"Great job - very old house needed old stuff vacuumed out then new foam and cellulose. Id hire these guys any time, great value"
Todd F. in December 2022
"Very Friendly great crew to get the job done. Did a great job inside for insulating our attic and outside for taking off the siding for blow in foam replaced all pieces of the siding"
Robert M. in November 2022
"They did a great job. They cleaned up the job and it looked like they were never there."
Glen L. in January 2023
Areas Of Expertise: Batt, Rolled or Reflective Insulation - Install or Upgrade, Spray Foam Insulation - Install, Blown-In Insulation - Install or Upgrade
"This winter we had some leaking in our attic because it was not insulated properly. Wright Foam help resolve the issue, in a professional and curtious manner. I would definitely recommend than."
Warda H. in September 2018
In business since 2004
About us: "Spray Foam Insulation System, Inc. has been servicing the local area since 2004. We specialize in all types of insulation and soundproofing. Customer service is our number one concern. Give us a call today for a free estimate and quick response. We look forward to your business. Thank you!"
Areas Of Expertise: Ice dams.( Targeting the causes & damages of), Vapor barrier /rafter repairs & support /Bathroom exhaust fans, Air sealing /ventilation /condesation issues , and 2 more
"Work is ongoing. I am impressed so far. I cannot rate value or quality at this time. Ask me later."
Michael K. in December 2017
Areas Of Expertise: Basement Remodels
"Hired them on the 21st of January and the project was done today, Feb 9th"
Theodore L. in February 2022
In business since 2021
Areas Of Expertise: Quality Products, Professional Installations, Blown in Attic Insulation , and 2 more
About us: "Midwest Attic Solutions is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities and to provide our employees with a great place to work. We look forward to working with you."
Areas Of Expertise: air sealing, roof vent instalation, Home Insulation
"He is awesome, professional, extremely punctual and absolutely flawless."
Jim H. in December 2020
Out of Network Insulation Contractors in Minneapolis, MN
- Spray Foam Insulation System, Inc.
7491 County Rd. 37 Northwest
Maple Lake, MN 55358
- Central Insulation
PO Box 28
Waconia, MN 55387
- Purpose Driven Restoration, LLC
325 Main St. Nw
Elk River, MN 55330
- Solid Construction Services
3325 Xylon Ave. N.
New Hope, MN 55427
- General Insulation, LLC
1821 Cedar Ave. , Suite 105
White Bear Lake, MN 55110
- Mike Olson Construction
4604 Washburn Ave. South
Minneapollis, MN 55410
- LP Design
20610 Rush Meadow Lane
Rogers, MN 55374
Frequently Asked Questions
What is insulation?
+
What is insulation?
Insulation is material that provides a barrier within a home’s walls, ceilings, and floors to regulate temperature and noise. If your home gets overly hot in the summer and cold in the winter, it’s likely not insulated properly.
Insulation efficiency is measured by R-value, which determines how resistant different types of insulation are to heat flow (or energy loss). R-values are measured by inch of thickness. The higher the R-value, the better the performance and the higher the price.
How much does insulation cost?
+
How much does insulation cost?
Our project data lists insulation costs between $1,400 and $6,300, but your final price will depend on the type of insulation you choose, its R-value, and how much you need.
- Fiberglass insulation: $0.30 – $1.50
- Blown-in insulation: $1 – $2
- Spray foam insulation: $0.50 – $2
- Radiant insulation: $0.20 – $1
- Rigid board insulation: $0.25 – $1
Luckily, insulation is one of the best investments you can make in your home—it has an ROI of at least 100%, meaning you’ll likely make back what you spend in a few years or so.
What is insulation made of?
+
What is insulation made of?
Insulation is made of many different materials, which can also impact the R-value needed for energy efficiency.
- Fiberglass: The most common insulation material made from glass. Fiberglass is a skin and lung irritant, so you’ll need to wear gloves and clothing when working with fiberglass insulation.
- Cellulose: Made from recycled paper products, plus borate for fire and insect resistance.
- Foam: Made from polystyrene, polyisocyanurate, or polyurethane plastic. You can also install cement-based foam insulation using rigid foam boards.
- Mineral wool: Made of fire-resistant rock wool, a mix of natural materials, or slag wool, made from a molten metal product.
- Natural fibers: Made from various recycled natural materials, including cotton, sheep’s wool, and straw.
Where is insulation in a house?
+
Where is insulation in a house?
If your attic is unfinished or you’ve ever demolished an interior wall, you might notice batt or spray foam insulation between the studs. Putting insulation between your walls and floors helps keep your home comfortable and your energy costs down. In addition to walls and attics, you can install insulation in your garage, in floors above vented crawl spaces, and basements.
- Garage Insulation: $0.50 to $1.25 per square foot
- Floor and crawl space insulation: $1 to $5 per square foot
- Basement insulation: $1.50 to $2.50 per square foot
- Wall insulation: $1 to $4 per square foot
- Attic insulation: $1,500 to $6,000
- Roof insulation: $1,500 to $4,500 or more
What are the different types of insulation?
+
What are the different types of insulation?
There are a few types of home insulation, and they all are made of different materials— most commonly, fiberglass, cellulose, and foam. Insulation includes these materials in the following forms:
- Loose-fill: Also called “blown-in,” loose-fill is sprayed into wall cavities, attics, and other oddly-shaped areas using special equipment. This insulation is usually made of fiberglass, cellulose, or mineral wool.
- Batts: An affordable insulation blanket best for unfinished spaces, such as between framing, studs, or joists. They come in pre-cut sections suitable for DIY installation and are mostly made from fiberglass, though other versions are also available.
- Rolls: Similar to batt insulation, but comes in rolls. Its make-up leaves less chance for gaps between sections and is more efficient than other types.
- Foam board: One of the most popular insulation types that can be used almost anywhere in your home. Foam boards also have a high R-value.
- Spray foam: Expands and hardens to fill gaps, small and large. Can be closed-cell or open-cell, but closed-cell has a higher R-value, making it more expensive per square foot.
- Radiant barriers: Does not reduce heat flow but directs heat away from the home instead. Radiant barriers are DIY-friendly and affordable, but they won’t be as effective in the winter months.
Top Insulation Projects
HomeAdvisor Community Rating
Minneapolis Insulation Contractors are rated 4.7 out of 5 based on 102 reviews of 13 pros.
The HomeAdvisor Community Rating is an overall rating based on verified reviews and feedback from our community of homeowners that have been connected with service professionals. See individual business pages for full, detailed reviews.
Other Top Projects in Your Area
Other Cities in Minnesota
If you're looking for Insulation Contractors that serve a different city in Minnesota, here are some popular suggestions:
Find Insulation Pros in Minneapolis,MN
Tell us about your project and we'll match you to the perfect pros.
Get Matched With ProsFind Pros Nearby
Do you provide these professional services?
Find out how HomeAdvisor can help your business
See Recent Leads
Recent Job Requests for Insulation Contractors in Minneapolis, MN
NewProject: Spray Foam Insulation Install Location: Minneapolis, MNDate: 03/08/23Desired Completion Date: Timing is flexibleRequest Stage: Planning & BudgetingNature of Project: Insulation for existing homeProperty Owner: YesLocation: Home/ResidenceNewProject: Blown-in Insulation Install Location: Minneapolis, MNDate: 03/07/23Nature of Project: Add insulationLocation: Home/ResidenceWhat type of insulation do you want?: Blown-inDesired Completion Date: Timing is flexibleRequest Stage: Planning & BudgetingApproximately how many square feet is the attic?: 500 - 1000 sq. ft.NewProject: Batt, Rolled or Reflective Insulation Install Location: Minneapolis, MNDate: 03/06/23Scope of Remodel: Enlarge existing garageLocation: Home/ResidenceWhat type of insulation do you want?: Batt, rolled or reflectiveDesired Completion Date: Timing is flexibleRequest Stage: Planning & BudgetingWhich of the following will you need moved or installed in your garage remodel (select all that apply)?: FlooringWhich of the following will you need moved or installed in your garage remodel (select all that apply)?: InsulationWhich of the following will you need moved or installed in your garage remodel (select all that apply)?: Interior walls or drywallComment: I have a large space above my 2 car garage I’d like to turn into a more usable, finished space.NewProject: Blown-in Insulation Install Location: Minneapolis, MNDate: 03/05/23Nature of Project: Insulation for existing homeLocation: Home/ResidenceDesired Completion Date: Timing is flexibleRequest Stage: Ready to HireLocation of Installation: FloorComment: Back room built on a concrete box on a bare ground. Looking for blown foundation underneath the floor. With basement access.Project: Spray Foam Insulation Install Location: Minneapolis, MNDate: 03/01/23Nature of Project: Repair/Replace existing insulationLocation: Home/ResidenceWhat type of insulation do you want?: Spray foamDesired Completion Date: Timing is flexibleRequest Stage: Planning & BudgetingArea of Home: Masonry wallsArea of Home: AtticArea of Home: Non-masonry wallsProject: Blown-in Insulation Install Location: Minneapolis, MNDate: 03/01/23Desired Completion Date: Timing is flexibleRequest Stage: Planning & BudgetingLocation: Home/ResidenceProject: Blown-in Insulation Install Location: Minneapolis, MNDate: 02/28/23Nature of Project: Insulation for existing homeLocation: Home/ResidenceDesired Completion Date: Within 1 weekRequest Stage: Planning & BudgetingLocation of Installation: RoofLocation of Installation: Masonry wallsLocation of Installation: Foundation wallsLocation of Installation: AtticLocation of Installation: Non-masonry wallsComment: We've got a 1951 1.5 story house with very little insulation. We'd like to change that.Project: Blown-in Insulation Install Location: Minneapolis, MNDate: 02/25/23Nature of Project: Repair/Replace existing insulationLocation: Home/ResidenceWhat type of insulation do you want?: Blown-inDesired Completion Date: More than 2 weeksRequest Stage: Planning & BudgetingApproximately how many square feet is the attic?: 500 - 1000 sq. ft.Project: Spray Foam Insulation Install Location: Minneapolis, MNDate: 02/24/23Area Description: Wall framing is exposed / unfinishedNature of Project: Repair/Replace existing insulationDesired Completion Date: 1 - 2 weeksLocation: Home/ResidenceLocation of Installation: Foundation wallsRequest Stage: Planning & BudgetingLocation of Installation: Masonry wallsProject: Spray Foam Insulation Install Location: Minneapolis, MNDate: 02/24/23Request Stage: Planning & BudgetingArea Description: Wall framing is exposed / unfinishedDesired Completion Date: 1 - 2 weeksNature of Project: Repair/Replace existing insulationLocation: Home/ResidenceLocation of Installation: AtticProject: Blown-in Insulation Install Location: Minneapolis, MNDate: 02/23/23Nature of Project: Add insulationLocation: Home/ResidenceWhat type of insulation do you want?: Blown-inDesired Completion Date: 1 - 2 weeksRequest Stage: Ready to HireApproximately how many square feet is the attic?: 500 - 1000 sq. ft.Comment: I am looking to sell/rent my property in the next few weeks. I know that additional insulation is needed in the attic. Looking for someone to add additional insulationProject: Blown-in Insulation Install Location: Minneapolis, MNDate: 02/23/23Location: Home/ResidenceWhat type of insulation do you want?: Blown-inDesired Completion Date: Timing is flexibleRequest Stage: Planning & BudgetingComment: 1700 sq Ft ramble built in 1963. I was told by a friend that I need some insulation added. Ceiling access entryProject: Spray Foam Insulation Install Location: Minneapolis, MNDate: 02/21/23Request Stage: Ready to HireDesired Completion Date: Timing is flexibleWhat type of insulation do you want?: Spray foamNature of Project: Insulation for new construction/additionLocation: Home/ResidenceArea of Home: AtticComment: I need my attic sealed and reinsulated. I am looking for a quote.Project: Soundproofing Location: Minneapolis, MNDate: 02/21/23Residence Type: Single family residenceLocation: Home/ResidenceDesired Completion Date: More than 2 weeksRequest Stage: Planning & BudgetingType of Noise: Exterior noise (traffic, airplanes, neighbors, etc.)Type of Noise: Construction noiseSoundproofing Locations: WallsSoundproofing Locations: Windows