How Much Does Poured-in-Place Rubber Surfacing Cost?
Typical Range:
$1,800 - $3,500
Typical Range:
$1,800 - $3,500
Cost data is based on research by HomeAdvisor.
Updated June 9, 2021
Written by HomeAdvisor.Poured-in-place rubber surfacing costs $1,800 to $3,500 to install on a 140-square-foot surface. Expect to spend about $2,200 on average. Poured rubber playgrounds are quick to install, which cuts down on labor costs. Labor falls at about $16 per hour. Some companies charge an hourly rate up to $75 per contractor.
The cost of this project varies significantly due to the wide selection of materials available. Factors like granule color, rubber thickness and size of surface area can all affect the final price.
Average Cost | $2,200 |
High Cost | $3,400 |
Low Cost | $1,800 |
For a 140-square-foot surface
On average, poured-in-place rubber costs about $16 per square foot. But high-end products like extra thick material and more complex projects can cost up to $25 per square foot. This number depends on the thickness, color and square footage. Larger surfaces generally cost less per square foot to install than smaller areas.
This material is great for playgrounds, pathways, pool areas and patios. It has benefits like:
Slip resistance
Versatility
Long lasting
Low maintenance
Cool to touch
Though it’s more expensive upfront than other materials like concrete or asphalt, its long lifespan should save you money over time.
Get Poured Rubber Quotes from Local Pros
The average cost to install a playground is about $500. When it comes to the ground or base, there are many materials available, meaning the final price can vary drastically from $1 to $15 per square foot.
Playground Surface Cost Comparison
Type | Materials Per Square Foot |
---|---|
Poured-in-place rubber | $7 - $15 |
Artificial Turf | $1 - $5+ |
Mulch | $6 - $8 |
Concrete | $1 - $2 |
Asphalt | $2 - $5 |
At $7 to $15 per square foot for materials, poured-in-place rubber works well for playgrounds. The thick, springy material helps prevent fall-related injuries. However, the thicker the material, the more expensive it will be. It does have a higher upfront cost than other materials but requires less maintenance.
At $1 to $5 or more per square foot, the cost of turf installation is pricier than sod. But it pays for itself in convenience over time. It offers many of the same benefits as poured-in-place rubber and lasts longer with less maintenance.
Playground mulch costs $6 to $8 per square foot. Both wood and rubber mulch are less expensive than poured rubber in the short term. But, over time, replacing the loose fill as needed costs more.
Compare wood and rubber mulch to see which option works best for you.
Concrete costs between $1 and $2 per square foot and doesn’t require as much maintenance as asphalt. It cracks over time and may need repairs. Concrete installation is more expensive than other materials like gravel.
Asphalt paving costs $2 to $5 per square foot, making it slightly more expensive than concrete. Asphalt adapts well to temperature changes and isn’t known to crack. It requires resealing every couple of years.
At between $2 and $3 per square foot of materials, rubber pavers are another option for playground flooring. Some benefits of pavers include:
Cheaper than poured surfacing
Easier to install than concrete or asphalt
Simpler to fix than poured rubber surfacing
Available in different sizes and thicknesses
A rubber driveway averages $7,500 for a 38- by 16-foot area. This is more expensive than the cost to install a concrete driveway, which sits at about $4,000.
Recycled rubber surfacing, also known as eco-paving, is an environmentally-friendly option for anywhere from $8 to $14 per square foot. It’s a good choice for those who’d like poured rubber surfacing for a lower cost. However, recycled material loses color more quickly than new and requires more frequent resurfacing.
Rubber Stone is a brand of recycled tire surfacing that can last 15 years or more. You can purchase it as interlocking mats or poured-in-place material. Consult with your hired contractor to see if this material is right for your driveway.
A 400-square-foot rubber pool deck will cost you about $6,400. The price may change depending on the shape of your pool, as irregular shapes can be complicated to install. Expect to pay more to cover steps.
.
The cost to install a patio, porch or deck runs most homeowners about $16 per square foot. Oddly-shaped surfaces and stairs could increase the installation price. These spaces are variable, and an exact price is difficult to estimate without a quote. Call a rubber flooring specialist to get a quote.
Professional installation can add anywhere between $1.50 and $12 per square foot to the price of materials, which runs between $7 and $15 per square foot. Though it can be tempting to do this project yourself, hiring a pro is the way to go when it comes to installing a rubber surface. If you prep the area where it will go correctly, it should be quick to install which lowers labor costs. However, if pros need to prep the space, it will cost more.
Choosing to DIY can save you money on this project – but take care. Poured rubber surfaces are tricky if you don’t know what you’re doing. If you must DIY, we recommend only doing a small surface area.
At $9 per square foot, rubber playground tiles require less maintenance than poured-in-place rubber. These tiles are easier to install, especially when the surface area is rectangular. Rectangular surfaces cut down on labor costs as there is no need to cut the units into different shapes.
Installing a 400-meter rubber track can cost anywhere from $400,000 to $1,000,000. This is a huge project, and the price can vary greatly depending on how you customize your materials. Color and thickness of the track play a large role in pricing, as does the state of the surface the track will go on.
Tar and chip pool decks, made of a combination of asphalt and crushed stone, cost between $1 and $5 per square foot. A poured rubber pebble pool deck is more expensive at about $16 per square foot and has rounded rubber particles instead of more common triangular pieces.
Duraroc rubber surfacing costs around $16 per square foot.
10-year warranty
Frequently used for pool areas
Prices based on square footage, surface condition, color and thickness of materials.
The best way to get an accurate price for this product is by calling for a quote.
Yes, you can have poured-in-place rubber flooring installed inside of your house. Residential indoor rubber flooring costs anywhere from $550 to $2,300 to fit in a 144-square-foot room. Many people use this surfacing in their home gyms, bathrooms and garages.