Granite
Igneous rock | |
Composition | |
---|---|
Primary | Felsic: potassium feldspar, plagioclase feldspar, and quartz |
Secondary | Differing amounts of muscovite, biotite, and hornblende-type amphiboles |
Granite (/ˈɡrænət/) is a coarse-grained (phaneritic) intrusive igneous rock composed mostly of quartz, alkali feldspar, and plagioclase. It forms from magma with a high content of silica and alkali metal oxides that slowly cools and solidifies underground. It is common in the continental crust of Earth, where it is found in igneous intrusions. These range in size from dikes only a few centimeters across to batholiths exposed over hundreds of square kilometers.
Granite is typical of a larger family of granitic rocks, or granitoids, that are composed mostly of coarse-grained quartz and feldspars in varying proportions. These rocks are classified by the relative percentages of quartz, alkali feldspar, and plagioclase (the QAPF classification), with true granite representing granitic rocks rich in quartz and alkali feldspar. Most granitic rocks also contain mica or amphibole minerals, though a few (known as leucogranites) contain almost no dark minerals.
![](http://webcf.waybackmachine.org/web/20220523113245im_/https://upload.wikimedia.org/wikipedia/commons/thumb/a/a1/Granito_nicol_incrociati.gif/300px-Granito_nicol_incrociati.gif)
Granite is nearly always massive (lacking any internal structures), hard, and tough. These properties have made granite a widespread construction stone throughout human history.
Description[edit]
![](http://webcf.waybackmachine.org/web/20220523113245im_/https://upload.wikimedia.org/wikipedia/commons/thumb/e/e8/Granite_qapf.png/310px-Granite_qapf.png)
The word "granite" comes from the Latin granum, a grain, in reference to the coarse-grained structure of such a completely crystalline rock.[1] Granitic rocks mainly consist of feldspar, quartz, mica, and amphibole minerals, which form an interlocking, somewhat equigranular matrix of feldspar and quartz with scattered darker biotite mica and amphibole (often hornblende) peppering the lighter color minerals. Occasionally some individual crystals (phenocrysts) are larger than the groundmass, in which case the texture is known as porphyritic. A granitic rock with a porphyritic texture is known as a granite porphyry. Granitoid is a general, descriptive field term for lighter-colored, coarse-grained igneous rocks. Petrographic examination is required for identification of specific types of granitoids. Granites can be predominantly white, pink, or gray in color, depending on their mineralogy.[2]
The alkali feldspar in granites is typically orthoclase or microcline and is often perthitic. The plagioclase is typically sodium-rich oligoclase. Phenocrysts are usually alkali feldspar.[3]
Granitic rocks are classified according to the QAPF diagram for coarse grained plutonic rocks and are named according to the percentage of quartz, alkali feldspar (orthoclase, sanidine, or microcline) and plagioclase feldspar on the A-Q-P half of the diagram. True granite (according to modern petrologic convention) contains between 20% and 60% quartz by volume, with 35% to 90% of the total feldspar consisting of alkali feldspar. Granitic rocks poorer in quartz are classified as syenites or monzonites, while granitic rocks dominated by plagioclase are classified as granodiorites or tonalites. Granitic rocks with over 90% alkali feldspar are classified as alkali feldspar granites. Granitic rock with more than 60% quartz, which is uncommon, is classified simply as quartz-rich granitoid or, if composed almost entirely of quartz, as quartzolite.[4][5][6]
True granites are further classified by the percentage of their total feldspar that is alkali feldspar. Granites whose feldspar is 65% to 90% alkali feldspar are syenogranites, while the feldspar in monzogranite is 35% to 65% alkali feldspar.[5][6] A granite containing both muscovite and biotite micas is called a binary or two-mica granite. Two-mica granites are typically high in potassium and low in plagioclase, and are usually S-type granites or A-type granites, as described below.[7][8]
Another aspect of granite classification is the ratios of metals that potentially form feldspars. Most granites have a composition such that almost all their aluminum and alkali metals (sodium and potassium) are combined as feldspar. This is the case when K2O + Na2O + CaO > Al2O3 > K2O + Na2O. Such granites are described as normal or metaluminous. Granites in which there is not enough aluminum to combine with all the alkali oxides as feldspar (Al2O3 < K2O + Na2O) are described as peralkaline, and they contain unusual sodium amphiboles such as riebeckite. Granites in which there is an excess of aluminum beyond what can be taken up in feldspars (Al2O3 > CaO + K2O + Na2O) are described as peraluminous, and they contain aluminum-rich minerals such as muscovite.[9]
Physical properties[edit]
The average density of granite is between 2.65 and 2.75 g/cm3 (165 and 172 lb/cu ft),[10] its compressive strength usually lies above 200 MPa, and its viscosity near STP is 3–6·1020 Pa·s.[11]
The melting temperature of dry granite at ambient pressure is 1215–1260 °C (2219–2300 °F);[12] it is strongly reduced in the presence of water, down to 650 °C at a few hundred megapascals of pressure.[13]
Granite has poor primary permeability overall, but strong secondary permeability through cracks and fractures if they are present.
Chemical composition[edit]
A worldwide average of the chemical composition of granite, by weight percent, based on 2485 analyses:[14]
SiO2 | 72.04% (silica) | |
Al2O3 | 14.42% (alumina) | |
K2O | 4.12% | |
Na2O | 3.69% | |
CaO | 1.82% | |
FeO | 1.68% | |
Fe2O3 | 1.22% | |
MgO | 0.71% | |
TiO2 | 0.30% | |
P2O5 | 0.12% | |
MnO | 0.05% |
The medium-grained equivalent of granite is microgranite.[15] The extrusive igneous rock equivalent of granite is rhyolite.[16]
Occurrence[edit]
Granitic rock is widely distributed throughout the continental crust.[17] Much of it was intruded during the Precambrian age; it is the most abundant basement rock that underlies the relatively thin sedimentary veneer of the continents. Outcrops of granite tend to form tors, domes or bornhardts, and rounded massifs. Granites sometimes occur in circular depressions surrounded by a range of hills, formed by the metamorphic aureole or hornfels. Granite often occurs as relatively small, less than 100 km2 stock masses (stocks) and in batholiths that are often associated with orogenic mountain ranges. Small dikes of granitic composition called aplites are often associated with the margins of granitic intrusions. In some locations, very coarse-grained pegmatite masses occur with granite.[18]
Origin[edit]
Granite forms from silica-rich (felsic) magmas. Felsic magmas are thought to form by addition of heat or water vapor to rock of the lower crust, rather than by decompression of mantle rock, as is the case with basaltic magmas.[19] It has also been suggested that some granites found at convergent boundaries between tectonic plates, where oceanic crust subducts below continental crust, were formed from sediments subducted with the oceanic plate. The melted sediments would have produced magma intermediate in its silica content, which became further enriched in silica as it rose through the overlying crust.[20]
Early fractional crystallisation serves to reduce a melt in magnesium and chromium, and enrich the melt in iron, sodium, potassium, aluminum, and silicon.[21] Further fractionation reduces the content of iron, calcium, and titanium.[22] This is reflected in the high content of alkali feldspar and quartz in granite.
The presence of granitic rock in island arcs shows that fractional crystallization alone can convert a basaltic magma to a granitic magma, but the quantities produced are small.[23] For example, granitic rock makes up just 4% of the exposures in the South Sandwich Islands.[24] In continental arc settings, granitic rocks are the most common plutonic rocks, and batholiths composed of these rock types extend the entire length of the arc. There are no indication of magma chambers where basaltic magmas differentiate into granites, or of cumulates produced by mafic crystals settling out of the magma. Other processes must produce these great volumes of felsic magma. One such process is injection of basaltic magma into the lower crust, followed by differentiation, which leaves any cumulates in the mantle. Another is heating of the lower crust by underplating basaltic magma, which produces felsic magma directly from crustal rock. The two processes produce different kinds of granites, which may be reflected in the division between S-type (produced by underplating) and I-type (produced by injection and differentiation) granites, discussed below.[23]
Alphabet classification system[edit]
The composition and origin of any magma that differentiates into granite leave certain petrological evidence as to what the granite's parental rock was. The final texture and composition of a granite are generally distinctive as to its parental rock. For instance, a granite that is derived from partial melting of metasedimentary rocks may have more alkali feldspar, whereas a granite derived from partial melting of metaigneous rocks may be richer in plagioclase. It is on this basis that the modern "alphabet" classification schemes are based.
The letter-based Chappell & White classification system was proposed initially to divide granites into I-type (igneous source) granite and S-type (sedimentary sources).[25] Both types are produced by partial melting of crustal rocks, either metaigneous rocks or metasedimentary rocks.
I-type granites are characterized by a high content of sodium and calcium, and by a strontium isotope ratio, 87Sr/86Sr, of less than 0.708. 87Sr is produced by radioactive decay of 87Rb, and since rubidium is concentrated in the crust relative to the mantle, a low ratio suggests origin in the mantle. The elevated sodium and calcium favor crystallization of hornblende rather than biotite. I-type granites are known for their porphyry copper deposits.[23] I-type granites are orogenic (associated with mountain building) and usually metaluminous.[9]
S-type granites are sodium-poor and aluminum-rich. As a result, they contain micas such as biotite and muscovite instead of hornblende. Their strontium isotope ratio is typically greater than 0.708, suggesting a crustal origin. They also commonly contain xenoliths of metamorphosed sedimentary rock, and host tin ores. Their magmas are water-rich, and they readily solidify as the water outgasses from the magma at lower pressure, so they less commonly make it to the surface than magmas of I-type granites, which are thus more common as volcanic rock (rhyolite).[23] They are also orogenic but range from metaluminous to strongly peraluminous.[9]
Although both I- and S-type granites are orogenic, I-type granites are more common close to the convergent boundary than S-type. This is attributed to thicker crust further from the boundary, which results in more crustal melting.[23]
A-type granites show a peculiar mineralogy and geochemistry, with particularly high silicon and potassium at the expense of calcium and magnesium[26] and a high content of high field strength cations (cations with a small radius and high electrical charge, such as zirconium, niobium, tantalum, and rare earth elements.)[27] They are not orogenic, forming instead over hot spots and continental rifting, and are metaluminous to mildly peralkaline and iron-rich.[9] These granites are produced by partial melting of refractory lithology such as granulites in the lower continental crust at high thermal gradients. This leads to significant extraction of hydrous felsic melts from granulite-facies resitites.[28][29] A-type granites occur in the Koettlitz Glacier Alkaline Province in the Royal Society Range, Antarctica.[30] The rhyolites of the Yellowstone Caldera are examples of volcanic equivalents of A-type granite.[31]
M-type granite was later proposed to cover those granites that were clearly sourced from crystallized mafic magmas, generally sourced from the mantle.[32] Although the fractional crystallisation of basaltic melts can yield small amounts of granites, which are sometimes found in island arcs,[33] such granites must occur together with large amounts of basaltic rocks.[23]
H-type granites were suggested for hybrid granites, which were hypothesized to form by mixing between mafic and felsic from different sources, such as M-type and S-type.[34] However, the big difference in rheology between mafic and felsic magmas makes this process problematic in nature.[35]
Granitization[edit]
Granitization is an old, and largely discounted, hypothesis that granite is formed in place through extreme metasomatism. The idea behind granitization was that fluids would supposedly bring in elements such as potassium, and remove others, such as calcium, to transform a metamorphic rock into granite. This was supposed to occur across a migrating front. However, experimental work had established by the 1960s that granites were of igneous origin.[36] The mineralogical and chemical features of granite can be explained only by crystal-liquid phase relations, showing that there must have been at least enough melting to mobilize the magma.[37]
However, at sufficiently deep crustal levels, the distinction between metamorphism and crustal melting itself becomes vague. Conditions for crystallization of liquid magma are close enough to those of high-grade metamorphism that the rocks often bear a close resemblance.[38] Under these conditions, granitic melts can be produced in place through the partial melting of metamorphic rocks by extracting melt-mobile elements such as potassium and silicon into the melts but leaving others such as calcium and iron in granulite residues. This may be the origin of migmatites. A migmatite consists of dark, refractory rock (the melanosome) that is permeated by sheets and channels of light granitic rock (the leucosome). The leucosome is interpreted as partial melt of a parent rock that has begun to separate from the remaining solid residue (the melanosome).[39] If enough partial melt is produced, it will separate from the source rock, become more highly evolved through fractional crystallization during its ascent toward the surface, and become the magmatic parent of granitic rock. The residue of the source rock becomes a granulite.
The partial melting of solid rocks requires high temperatures and the addition of water or other volatiles which lower the solidus temperature (temperature at which partial melting commences) of these rocks. It was long debated whether crustal thickening in orogens (mountain belts along convergent boundaries) was sufficient to produce granite melts by radiogenic heating, but recent work suggests that this is not a viable mechanism.[40] In-situ granitization requires heating by the asthenospheric mantle or by underplating with mantle-derived magmas.[41]
Ascent and emplacement[edit]
Granite magmas have a density of 2.4 Mg/m3, much less than the 2.8 Mg/m3 of high-grade metamorphic rock. This gives them tremendous buoyancy, so that ascent of the magma is inevitable once enough magma has accumulated. However, the question of precisely how such large quantities of magma are able to shove aside country rock to make room for themselves (the room problem) is still a matter of research.[42]
Two main mechanisms are thought to be important:
- Stokes diapir
- Fracture propagation
Of these two mechanisms, Stokes diapirism has been favoured for many years in the absence of a reasonable alternative. The basic idea is that magma will rise through the crust as a single mass through buoyancy. As it rises, it heats the wall rocks, causing them to behave as a power-law fluid and thus flow around the intrusion allowing it to pass without major heat loss.[43] This is entirely feasible in the warm, ductile lower crust where rocks are easily deformed, but runs into problems in the upper crust which is far colder and more brittle. Rocks there do not deform so easily: for magma to rise as a diapir it would expend far too much energy in heating wall rocks, thus cooling and solidifying before reaching higher levels within the crust.
Fracture propagation is the mechanism preferred by many geologists as it largely eliminates the major problems of moving a huge mass of magma through cold brittle crust. Magma rises instead in small channels along self-propagating dykes which form along new or pre-existing fracture or fault systems and networks of active shear zones.[44] As these narrow conduits open, the first magma to enter solidifies and provides a form of insulation for later magma.
These mechanisms can operate in tandem. For example, diapirs may continue to rise through the brittle upper crust through stoping, where the granite cracks the roof rocks, removing blocks of the overlying crust which then sink to the bottom of the diapir while the magma rises to take their place. This can occur as piecemeal stopping (stoping of small blocks of chamber roof), as cauldron subsidence (collapse of large blocks of chamber roof), or as roof foundering (complete collapse of the roof of a shallow magma chamber accompanied by a caldera eruption.) There is evidence for cauldron subsidence at the Mt. Ascutney intrusion in eastern Vermont.[45] Evidence for piecemeal stoping is found in intrusions that are rimmed with igneous breccia containing fragments of country rock.[42]
Assimilation is another mechanism of ascent, where the granite melts its way up into the crust and removes overlying material in this way. This is limited by the amount of thermal energy available, which must be replenished by crystallization of higher-melting minerals in the magma. Thus the magma is melting crustal rock at its roof while simultaneously crystallizing at its base. This results in steady contamination with crustal material as the magma rises. This may not be evident in the major and minor element chemistry, since the minerals most likely to crystallize at the base of the chamber are the same ones that would crystallize anyway, but crustal assimilation is detectable in isotope ratios.[46] Heat loss to the country rock means that ascent by assimilation is limited to distance similar to the height of the magma chamber.[47]
Weathering[edit]
Physical weathering occurs on a large scale in the form of exfoliation joints, which are the result of granite's expanding and fracturing as pressure is relieved when overlying material is removed by erosion or other processes.
Chemical weathering of granite occurs when dilute carbonic acid, and other acids present in rain and soil waters, alter feldspar in a process called hydrolysis.[48][49] As demonstrated in the following reaction, this causes potassium feldspar to form kaolinite, with potassium ions, bicarbonate, and silica in solution as byproducts. An end product of granite weathering is grus, which is often made up of coarse-grained fragments of disintegrated granite.
Climatic variations also influence the weathering rate of granites. For about two thousand years, the relief engravings on Cleopatra's Needle obelisk had survived the arid conditions of its origin before its transfer to London. Within two hundred years, the red granite has drastically deteriorated in the damp and polluted air there.[50]
Soil development on granite reflects the rock's high quartz content and dearth of available bases, with the base-poor status predisposing the soil to acidification and podzolization in cool humid climates as the weather-resistant quartz yields much sand.[51] Feldspars also weather slowly in cool climes, allowing sand to dominate the fine-earth fraction. In warm humid regions, the weathering of feldspar as described above is accelerated so as to allow a much higher proportion of clay with the Cecil soil series a prime example of the consequent Ultisol great soil group.[52]
Natural radiation[edit]
Granite is a natural source of radiation, like most natural stones.
Potassium-40 is a radioactive isotope of weak emission, and a constituent of alkali feldspar, which in turn is a common component of granitic rocks, more abundant in alkali feldspar granite and syenites.
Some granites contain around 10 to 20 parts per million (ppm) of uranium. By contrast, more mafic rocks, such as tonalite, gabbro and diorite, have 1 to 5 ppm uranium, and limestones and sedimentary rocks usually have equally low amounts. Many large granite plutons are sources for palaeochannel-hosted or roll front uranium ore deposits, where the uranium washes into the sediments from the granite uplands and associated, often highly radioactive pegmatites. Cellars and basements built into soils over granite can become a trap for radon gas,[citation needed] which is formed by the decay of uranium.[53] Radon gas poses significant health concerns and is the number two cause of lung cancer in the US behind smoking.[54]
Thorium occurs in all granites.[55] Conway granite has been noted for its relatively high thorium concentration of 56±6 ppm.[56]
There is some concern that some granite sold as countertops or building material may be hazardous to health.[57] Dan Steck of St. Johns University has stated[58] that approximately 5% of all granite is of concern, with the caveat that only a tiny percentage of the tens of thousands of granite slab types have been tested. Resources from national geological survey organizations are accessible online to assist in assessing the risk factors in granite country and design rules relating, in particular, to preventing accumulation of radon gas in enclosed basements and dwellings.
A study of granite countertops was done (initiated and paid for by the Marble Institute of America) in November 2008 by National Health and Engineering Inc. of USA. In this test, all of the 39 full-size granite slabs that were measured for the study showed radiation levels well below the European Union safety standards (section 4.1.1.1 of the National Health and Engineering study) and radon emission levels well below the average outdoor radon concentrations in the US.[59]
Industry[edit]
![](http://webcf.waybackmachine.org/web/20220523113245im_/https://upload.wikimedia.org/wikipedia/commons/thumb/f/fb/Hilloinen_2017_2.jpg/220px-Hilloinen_2017_2.jpg)
Granite and related marble industries are considered one of the oldest industries in the world, existing as far back as Ancient Egypt.[60]
Major modern exporters of granite include China, India, Italy, Brazil, Canada, Germany, Sweden, Spain and the United States.[61]
Uses[edit]
Antiquity[edit]
The Red Pyramid of Egypt (circa 2590 BC), named for the light crimson hue of its exposed limestone surfaces, is the third largest of Egyptian pyramids. Pyramid of Menkaure, likely dating 2510 BC, was constructed of limestone and granite blocks. The Great Pyramid of Giza (c. 2580 BC) contains a huge granite sarcophagus fashioned of "Red Aswan Granite". The mostly ruined Black Pyramid dating from the reign of Amenemhat III once had a polished granite pyramidion or capstone, which is now on display in the main hall of the Egyptian Museum in Cairo (see Dahshur). Other uses in Ancient Egypt include columns, door lintels, sills, jambs, and wall and floor veneer.[62] How the Egyptians worked the solid granite is still a matter of debate. Patrick Hunt[63] has postulated that the Egyptians used emery, which has greater hardness on the Mohs scale.
Rajaraja Chola I of the Chola Dynasty in South India built the world's first temple entirely of granite in the 11th century AD in Tanjore, India. The Brihadeeswarar Temple dedicated to Lord Shiva was built in 1010. The massive Gopuram (ornate, upper section of shrine) is believed to have a mass of around 81 tonnes. It was the tallest temple in south India.[64]
Imperial Roman granite was quarried mainly in Egypt, and also in Turkey, and on the islands of Elba and Giglio. Granite became "an integral part of the Roman language of monumental architecture".[65] The quarrying ceased around the third century AD. Beginning in Late Antiquity the granite was reused, which since at least the early 16th century became known as spolia. Through the process of case-hardening, granite becomes harder with age. The technology required to make tempered metal chisels was largely forgotten during the Middle Ages. As a result, Medieval stoneworkers were forced to use saws or emery to shorten ancient columns or hack them into discs. Giorgio Vasari noted in the 16th century that granite in quarries was "far softer and easier to work than after it has lain exposed" while ancient columns, because of their "hardness and solidity have nothing to fear from fire or sword, and time itself, that drives everything to ruin, not only has not destroyed them but has not even altered their colour."[65]
Modern[edit]
Sculpture and memorials[edit]
In some areas, granite is used for gravestones and memorials. Granite is a hard stone and requires skill to carve by hand. Until the early 18th century, in the Western world, granite could be carved only by hand tools with generally poor results.
A key breakthrough was the invention of steam-powered cutting and dressing tools by Alexander MacDonald of Aberdeen, inspired by seeing ancient Egyptian granite carvings. In 1832, the first polished tombstone of Aberdeen granite to be erected in an English cemetery was installed at Kensal Green Cemetery. It caused a sensation in the London monumental trade and for some years all polished granite ordered came from MacDonald's.[66] As a result of the work of sculptor William Leslie, and later Sidney Field, granite memorials became a major status symbol in Victorian Britain. The royal sarcophagus at Frogmore was probably the pinnacle of its work, and at 30 tons one of the largest. It was not until the 1880s that rival machinery and works could compete with the MacDonald works.
Modern methods of carving include using computer-controlled rotary bits and sandblasting over a rubber stencil. Leaving the letters, numbers, and emblems exposed and the remainder of the stone covered with rubber, the blaster can create virtually any kind of artwork or epitaph.
The stone known as "black granite" is usually gabbro, which has a completely different chemical composition.[67]
Buildings[edit]
Granite has been extensively used as a dimension stone and as flooring tiles in public and commercial buildings and monuments. Aberdeen in Scotland, which is constructed principally from local granite, is known as "The Granite City". Because of its abundance in New England, granite was commonly used to build foundations for homes there. The Granite Railway, America's first railroad, was built to haul granite from the quarries in Quincy, Massachusetts, to the Neponset River in the 1820s.[68]
Engineering[edit]
Engineers have traditionally used polished granite surface plates to establish a plane of reference, since they are relatively impervious, inflexible, and maintain good dimensional stability. Sandblasted concrete with a heavy aggregate content has an appearance similar to rough granite, and is often used as a substitute when use of real granite is impractical. Granite tables are used extensively as bases or even as the entire structural body of optical instruments, CMMs, and very high precision CNC machines because of granite's rigidity, high dimensional stability, and excellent vibration characteristics. A most unusual use of granite was as the material of the tracks of the Haytor Granite Tramway, Devon, England, in 1820.[69] Granite block is usually processed into slabs, which can be cut and shaped by a cutting center.[70] In military engineering, Finland planted granite boulders along its Mannerheim Line to block invasion by Russian tanks in the Winter War of 1939–40.[71]
Paving[edit]
Granite is used as a pavement material. This is because it is extremely durable, permeable and requires little maintenance. For example, in Sydney, Australia black granite stone is used for the paving and kerbs throughout the Central Business District. [72]
Other uses[edit]
Curling stones are traditionally fashioned of Ailsa Craig granite. The first stones were made in the 1750s, the original source being Ailsa Craig in Scotland. Because of the rarity of this granite, the best stones can cost as much as US$1,500. Between 60 and 70 percent of the stones used today are made from Ailsa Craig granite, although the island is now a wildlife reserve and is still used for quarrying under license for Ailsa granite by Kays of Scotland for curling stones.[73]
Rock climbing[edit]
Granite is one of the rocks most prized by climbers, for its steepness, soundness, crack systems, and friction.[74] Well-known venues for granite climbing include the Yosemite Valley, the Bugaboos, the Mont Blanc massif (and peaks such as the Aiguille du Dru, the Mourne Mountains, the Adamello-Presanella Alps, the Aiguille du Midi and the Grandes Jorasses), the Bregaglia, Corsica, parts of the Karakoram (especially the Trango Towers), the Fitzroy Massif, Patagonia, Baffin Island, Ogawayama, the Cornish coast, the Cairngorms, Sugarloaf Mountain in Rio de Janeiro, Brazil, and the Stawamus Chief, British Columbia, Canada.
Granite rock climbing is so popular that many of the artificial rock climbing walls found in gyms and theme parks are made to look and feel like granite.[citation needed]
Gallery[edit]
Granite was used for setts on the St. Louis riverfront and for the piers of the Eads Bridge (background)
The granite peaks of the Cordillera Paine in the Chilean Patagonia
Half Dome, Yosemite National Park, is actually a granite arête and is a popular rock climbing destination
Rixö red granite quarry in Lysekil, Sweden
Granite in Auyuittuq National Park on Baffin Island, Canada
Granite in Paarl, South Africa
See also[edit]
- Cheyenne Mountain Complex – Space Force installation
- Epoxy granite
- Exfoliating granite – Granite skin peeling like an onion (desquamation) because of weathering
- Falkenfelsen, also known as Falcon Rock – Rock formation in Germany
- Fall River granite – A Precambrian bedrock underlying the City of Fall River, Massachusetts and surrounding area
- Flared slope – Rock-wall with a smooth transition into a concavity at the foot zone
- Greisen – Highly altered granitic rock or pegmatite
- Hypersolvus – Type of granite, with a single feldspar
- Kashmir gold
- List of rock types – List of rock types recognized by geologists
- Luxullianite – Rare type of granite
- Mourne Mountains – Mountain range in Northern Ireland
- Orbicular granite
- Pikes Peak granite, Colorado
- Quartz monzonite – Type of igneous rock
- Rapakivi granite – Hornblende-biotite granite containing large round crystals of orthoclase each with a rim of oligoclase
- Stone Mountain – Mountain and park in Georgia, United States, Georgia
- Subsolvus – Two feldspar granite
- Wicklow Mountains – Mountain range in Ireland, Ireland
References[edit]
- Citations
- ^ Read, H.H. (January 1943). "Meditations on granite: Part one". Proceedings of the Geologists' Association. 54 (2): 64–85. doi:10.1016/S0016-7878(43)80008-0.
- ^ "Granitoids – Granite and the Related Rocks Granodiorite, Diorite and Tonalite". Geology.about.com. 2010-02-06. Retrieved 2010-05-09.
- ^ Blatt, Harvey; Tracy, Robert J. (1996). Petrology : igneous, sedimentary, and metamorphic (2nd ed.). New York: W.H. Freeman. p. 45. ISBN 0-7167-2438-3.
- ^ Le Bas, M. J.; Streckeisen, A. L. (1991). "The IUGS systematics of igneous rocks". Journal of the Geological Society. 148 (5): 825–833. Bibcode:1991JGSoc.148..825L. CiteSeerX 10.1.1.692.4446. doi:10.1144/gsjgs.148.5.0825. S2CID 28548230.
- ^ a b "Rock Classification Scheme - Vol 1 - Igneous" (PDF). British Geological Survey: Rock Classification Scheme. 1: 1–52. 1999.
- ^ a b Philpotts, Anthony R.; Ague, Jay J. (2009). Principles of igneous and metamorphic petrology (2nd ed.). Cambridge, UK: Cambridge University Press. pp. 139–143. ISBN 9780521880060.
- ^ Barbarin, Bernard (1 April 1996). "Genesis of the two main types of peraluminous granitoids". Geology. 24 (4): 295–298. Bibcode:1996Geo....24..295B. doi:10.1130/0091-7613(1996)024<0295:GOTTMT>2.3.CO;2.
- ^ Washington, Henry S. (1921). "The Granites of Washington, D. C.". Journal of the Washington Academy of Sciences. 11 (19): v459–470. JSTOR 24532555.
- ^ a b c d Blatt & Tracy 1996, p. 185.
- ^ "Rock Types and Specific Gravities". EduMine. Archived from the original on 2017-08-31. Retrieved 2017-08-27.
- ^ Kumagai, Naoichi; Sadao Sasajima; Hidebumi Ito (1978). "Long-term Creep of Rocks: Results with Large Specimens Obtained in about 20 Years and Those with Small Specimens in about 3 Years". Journal of the Society of Materials Science (Japan). 27 (293): 157–161. doi:10.2472/jsms.27.155.
- ^ Larsen, Esper S. (1929). "The temperatures of magmas". American Mineralogist. 14: 81–94.
- ^ Holland, Tim; Powell, Roger (2001). "Calculation of phase relations involving haplogranitic melts using an internally consistent thermodynamic dataset". Journal of Petrology. 42 (4): 673–683. Bibcode:2001JPet...42..673H. doi:10.1093/petrology/42.4.673.
- ^ Blatt and Tracy 1996, p.66
- ^ "Microgranite". OpenLearn. The Open University. Retrieved 28 December 2021.
- ^ Haldar, S.K.; Tišljar, J. (2014). Introduction to Mineralogy and Petrology. Elsevier. p. 116. ISBN 978-0-12-408133-8.
- ^ Singh, G. (2009). Earth Science Today. Discovery Publishing House. ISBN 9788183564380.
- ^ Twidale, C. R. (1982). Granite landforms. Amsterdam: Elsevier Scientific Pub. Co. ISBN 0444421165. Retrieved 10 October 2020.
- ^ Philpotts & Ague 2009, pp. 15–16.
- ^ Castro, Antonio (January 2014). "The off-crust origin of granite batholiths". Geoscience Frontiers. 5 (1): 63–75. doi:10.1016/j.gsf.2013.06.006.
- ^ Blatt & Tracy 1996, p. 128.
- ^ Blatt & Tracy 1996, p. 172.
- ^ a b c d e f Philpotts & Ague 2009, p. 378.
- ^ Baker, P. E. (February 1968). "Comparative volcanology and petrology of the atlantic island-arcs". Bulletin Volcanologique. 32 (1): 189–206. Bibcode:1968BVol...32..189B. doi:10.1007/BF02596591. S2CID 128993656.
- ^ Chappell, B. W.; White, A. J. R. (2001). "Two contrasting granite types: 25 years later". Australian Journal of Earth Sciences. 48 (4): 489–499. Bibcode:2001AuJES..48..489C. doi:10.1046/j.1440-0952.2001.00882.x. S2CID 33503865.
- ^ Winter, John D. (2014). Principles of igneous and metamorphic petrology (Second ; Pearson new international ed.). Harlow. p. 381. ISBN 9781292021539.
- ^ Philpotts & Ague 2009, p. 148.
- ^ Blatt & Tracy 1996, pp. 203–206.
- ^ Whalen, Joseph B.; Currie, Kenneth L.; Chappell, Bruce W. (April 1987). "A-type granites: geochemical characteristics, discrimination and petrogenesis". Contributions to Mineralogy and Petrology. 95 (4): 407–419. Bibcode:1987CoMP...95..407W. doi:10.1007/BF00402202. S2CID 128541930.
- ^ Cottle, John M.; Cooper, Alan F. (June 2006). "Geology, geochemistry, and geochronology of an A‐type granite in the Mulock Glacier area, southern Victoria Land, Antarctica". New Zealand Journal of Geology and Geophysics. 49 (2): 191–202. doi:10.1080/00288306.2006.9515159. S2CID 128395509.
- ^ Branney, M. J.; Bonnichsen, B.; Andrews, G. D. M.; Ellis, B.; Barry, T. L.; McCurry, M. (January 2008). "'Snake River (SR)-type' volcanism at the Yellowstone hotspot track: distinctive products from unusual, high-temperature silicic super-eruptions". Bulletin of Volcanology. 70 (3): 293–314. doi:10.1007/s00445-007-0140-7. S2CID 128878481.
- ^ Whalen, J. B. (1 August 1985). "Geochemistry of an Island-Arc Plutonic Suite: the Uasilau-Yau Yau Intrusive Complex, New Britain, P.N.G". Journal of Petrology. 26 (3): 603–632. Bibcode:1985JPet...26..603W. doi:10.1093/petrology/26.3.603.
- ^ Saito, Satoshi; Arima, Makoto; Nakajima, Takashi; Kimura, Jun-Ichi (2004). "Petrogenesis of Ashigawa and Tonogi granitic intrusions, southern part of the Miocene Kofu Granitic Complex, central Japan: M-type granite in the Izu arc collision zone". Journal of Mineralogical and Petrological Sciences. 99 (3): 104–117. Bibcode:2004JMPeS..99..104S. doi:10.2465/jmps.99.104.
- ^ Castro, A.; Moreno-Ventas, I.; de la Rosa, J.D. (October 1991). "H-type (hybrid) granitoids: a proposed revision of the granite-type classification and nomenclature". Earth-Science Reviews. 31 (3–4): 237–253. Bibcode:1991ESRv...31..237C. doi:10.1016/0012-8252(91)90020-G.
- ^ Philpotts & Ague 2009, pp. 104–105.
- ^ Philpotts & Ague 2009, p. 511.
- ^ McBirney, Alexander R. (1984). Igneous petrology. San Francisco, Calif.: Freeman, Cooper. pp. 379–380. ISBN 0877353239.
- ^ McBirney, 1984 & 379-380.
- ^ Philpotts & Ague 2009, p. 44.
- ^ Clark, Chris; Fitzsimons, Ian C. W.; Healy, David; Harley, Simon L. (1 August 2011). "How Does the Continental Crust Get Really Hot?". Elements. 7 (4): 235–240. doi:10.2113/gselements.7.4.235.
- ^ Zheng, Y.-F.; Chen, R.-X. (2017). "Regional metamorphism at extreme conditions: Implications for orogeny at convergent plate margins". Journal of Asian Earth Sciences. 145: 46–73. Bibcode:2017JAESc.145...46Z. doi:10.1016/j.jseaes.2017.03.009.
- ^ a b Philpotts & Ague 2009, p. 80.
- ^ Weinberg, R. F.; Podladchikov, Y. (1994). "Diapiric ascent of magmas through power law crust and mantle". Journal of Geophysical Research. 99 (B5): 9543. Bibcode:1994JGR....99.9543W. doi:10.1029/93JB03461. S2CID 19470906.
- ^ Clemens, John (1998). "Observations on the origins and ascent mechanisms of granitic magmas". Journal of the Geological Society of London. 155 (Part 5): 843–51. Bibcode:1998JGSoc.155..843C. doi:10.1144/gsjgs.155.5.0843. S2CID 129958999.
- ^ Blatt & Tracy 1996, pp. 21–22.
- ^ Philpotts & Ague 2009, pp. 347–350.
- ^ Oxburgh, E. R.; McRae, Tessa (27 April 1984). "Physical constraints on magma contamination in the continental crust: an example, the Adamello complex". Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences. 310 (1514): 457–472. Bibcode:1984RSPTA.310..457O. doi:10.1098/rsta.1984.0004. S2CID 120776326.
- ^ "Granite [Weathering]". University College London. Archived from the original on 15 October 2014. Retrieved 10 July 2014.
- ^ "Hydrolysis". Geological Society of London. Retrieved 10 July 2014.
- ^ Marsh, William M.; Kaufman, Martin M. (2012). Physical Geography: Great Systems and Global Environments. Cambridge University Press. p. 510. ISBN 9781107376649.
- ^ "Land Use Impacts". Land Use Impacts on Soil Quality. Retrieved 23 March 2022.
- ^ "Cecil – North Carolina State Soil" (PDF). Soil Science Society of America. Retrieved 23 March 2022.
- ^ "Decay series of Uranium". Archived from the original on March 9, 2012. Retrieved 2008-10-19.
- ^ "Radon and Cancer: Questions and Answers". National Cancer Institute. Retrieved 2008-10-19.
- ^ Hubbert, M. King (March 8, 1956) Nuclear Energy and the Fossil Fuels. American Petroleum Institute Conference. Energy Bulletin.
- ^ Adams, J. A.; Kline, M. C.; Richardson, K. A.; Rogers, J. J. (1962). "The Conway Granite of New Hampshire As a Major Low-Grade Thorium Resource". Proceedings of the National Academy of Sciences of the United States of America. 48 (11): 1898–905. Bibcode:1962PNAS...48.1898A. doi:10.1073/pnas.48.11.1898. PMC 221093. PMID 16591014.
- ^ "Granite Countertops and Radiation". United States Environmental Protection Agency. 4 May 2015. Retrieved 7 January 2020.
- ^ Steck, Daniel J. (2009). "Pre- and Post-Market Measurements of Gamma Radiation and Radon Emanation from a Large Sample of Decorative Granites" (PDF). Nineteenth International Radon Symposium. pp. 28–51.
- ^ Natural Stone Countertops and Radon – Environmental Health and Engineering – Assessing Exposure to Radon and Radiation from Granite Countertops.
- ^ Nelson L. Nemerow (27 January 2009). Environmental Engineering: Environmental Health and Safety for Municipal Infrastructure, Land Use and Planning, and Industry. John Wiley & Sons. p. 40. ISBN 978-0-470-08305-5.
- ^ Parmodh Alexander (15 January 2009). A Handbook of Minerals, Crystals, Rocks and Ores. New India Publishing. p. 585. ISBN 978-81-907237-8-7.
- ^ James A. Harrell. "Decorative Stones in the Pre-Ottoman Islamic Buildings of Cairo, Egypt". Retrieved 2008-01-06.
- ^ "Egyptian Genius: Stoneworking for Eternity". Archived from the original on 2007-10-14. Retrieved 2008-01-06.
- ^ Heitzman, James (1991). "Ritual Polity and Economy: The Transactional Network of an Imperial Temple in Medieval South India". Journal of the Economic and Social History of the Orient. BRILL. 34 (1/2): 23–54. doi:10.1163/156852091x00157. JSTOR 3632277.
- ^ a b Waters, Michael (2016). "Reviving Antiquity with Granite: Spolia and the Development of Roman Renaissance Architecture". Architectural History. 59: 149–179. doi:10.1017/arh.2016.5.
- ^ Friends of West Norwood Cemetery newsletter 71 Alexander MacDonald (1794–1860) – Stonemason,
- ^ "Gabbro". Geology.com. Retrieved 2022-01-25.
- ^ Brayley, A.W. (1913). History of the Granite Industry of New England (2018 ed.). Franklin Classics. ISBN 0342278657. Retrieved 3 December 2020.
- ^ Ewans, M.C. (1966). The Haytor Granite Tramway and Stover Canal. Newton Abbot: David & Charles.
- ^ Bai, Shuo-wei; Zhang, Jin-sheng; Wang, Zhi (January 2016). "Selection of a sustainable technology for cutting granite block into slabs". Journal of Cleaner Production. 112: 2278–2291. doi:10.1016/j.jclepro.2015.10.052.
- ^ Chersicla, Rick (January–March 2017). "What Free Men Can Do: The Winter War, the Use of Delay, and Lessons for the 21st Century" (PDF). Infantry: 63. Retrieved 3 December 2020.
- ^ "Sydney Streets technical specifications". November 2020. Retrieved 25 January 2022.
- ^ Roach, John (October 27, 2004). "National Geographic News — Puffins Return to Scottish Island Famous for Curling Stones". National Geographic News.
- ^ Green, Stewart. "3 Types of Rock for Climbing: Granite, Sandstone & Limestone: The Geology of Rock Climbing". Liveabout.dotcom. Dotdash. Retrieved 3 December 2020.
Further reading[edit]
- Blasik, Miroslava; Hanika, Bogdashka, eds. (2012). Granite: Occurrence, Mineralogy and Origin. Hauppauge, New York: Nova Science. ISBN 978-1-62081-566-3.
- Twidale, Charles Rowland (2005). Landforms and Geology of Granite Terrains. Leiden, Netherlands: A. A. Balkema. ISBN 978-0-415-36435-5.
- Marmo, Vladimir (1971). Granite Petrology and the Granite Problem. Amsterdam, Netherlands: Elsevier Scientific. ISBN 978-0-444-40852-5.
External links[edit]
![]() |
Wikimedia Commons has media related to Granite. |