How Much Does a Retaining Wall Cost?
Typical Range:
$3,199 - $8,764
Typical Range:
$3,199 - $8,764
Cost data is based on actual project costs as reported by 2,148 HomeAdvisor members. Embed this data
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
•
•
•
•
Updated February 4, 2022
Reviewed by Tara Dudley, Landscape Designer, Landscape Project Coordinator and Owner of Plant Life Designs.The average cost of building a retaining wall is $5,704. You’ll likely spend between $3,199 and $8,764, but some projects hit $14,000. You'll pay $20 to $60 per square foot or $30 to $150 per linear foot on average, with large, complex builds with high-end materials costing up to $125 per square foot. Materials range from $5 to $50 per square foot on average, with labor adding $50 to $75 per hour.
The final price depends on factors including:
The type of material
Width, length and height of the wall
Reinforcement
Decorative finishes
Engineering
Location of retaining wall
Retaining walls serve many purposes, from protecting areas of the property from sliding soil to holding foundation in place. You may also need them to add surface area to property boundaries or to preserve existing ground. Since they’re one of the most visible elements of your landscape, you’ll want them to be as beautiful as they are functional.
Let's calculate cost data for you. Where are you located?
Where are you located?
National Average | $5,704 |
Typical Range | $3,199 - $8,764 |
Low End - High End | $1,200 - $14,500 |
Cost data is based on actual project costs as reported by 2,148 HomeAdvisor members.
Type | Total Cost Per Square Foot |
---|---|
Poured Concrete | $20 – $25 |
Wood Timber | $15 – $25 |
Stone Veneer | $11 – $15 |
Boulder/Rock | $8 – $12 |
Gabion | $4 – $40 |
Brick | $14 – $15 |
Steel/Metal | $10 – $20 |
Rammed Earth/Chalk | $3 – $27 |
Wooden retaining wall materials average $15 to $30 per square foot. They typically last five to 20 years. They’re a favorite for gardens because of their natural appearance. You can easily find this cost-effective material locally. The downside of using wood is that it is susceptible to rot and water damage. Proper material choice, drainage, and waterproofing during installation can make this style last decades.
Railroad tie retaining walls cost $25 to $30 per square foot. Because they’re soaked in creosote, they don’t rot the way untreated wood does. But it’s also toxic to humans, making it a less popular option. Check with your local code enforcement or contractor to see if you’re allowed to use these in your area.
Sheet Piling | $40 - $60 |
Corten | $75 - $125 |
I-Beam | $40 - $90 |
Steel sheet piling retaining walls cost $40 to $60 per square foot. Untreated steel rusts. Even treated steel eventually corrodes when used in coastal areas. Galvanized steel lasts the longest in wet and salty environments.
Corten Steel (often referred to by brand name COR-TEN®, or weathering steel), costs $75 to $125 per square foot. For retaining walls, it’s the most expensive option available. You can cut 25% to 50% off the cost using a timber or concrete wall faced with a thin sheet of Corten. Surface oxidizes to create a layer of rust, which defends the material from weather and erosion. It doesn't require maintenance and will last a long time. It doesn’t do well submerged or in coastal areas, where it’ll continue to corrode.
I-beam retaining walls, also called soldier pile, cost $40 to $90 per square foot. One of the more expensive varieties, they’re created using vertical I-beams concreted into holes. Wood slats or precast concrete panels are placed between the steel in the beams' grooves to create the structure.
Rammed earth retaining walls cost $20 to $30 per square foot. They’re created by compacting earth with a binder into a hardened structure. Modern methods use some cement as a binder and can reach strengths like concrete. Although not used extensively, it’s a more environmentally responsible alternative to brick and concrete.
Compressed earth blocks are different from rammed earth walls in the way that concrete blocks are different from poured concrete. Compressed earth blocks are compressed individually and can come as low as $5 to $10 per square foot, or $0.50 to $2 per block, not including labor.
Brick walls cost $10 to $45 per square foot. These act as a veneer in a retaining wall, meaning they’re only one brick thick (a wythe), typically outside of poured or block concrete. They're made of clay but created in a factory specializing in brick.
When used alone, they're often only suitable up to about four feet in height. For edging, stacked three or four high, you can use them only one wythe thick. Above that height, you’ll want to have them two wythes thick for better stability.
Stone retaining walls cost $5 to $100 per square foot. Prices range from the inexpensive and practical gabion wall to the high-end stacked stone and limestone options.
Concrete retaining walls cost $10 to $100 per square face foot (the square feet of the face of the wall). You can choose from poured, split face block or CMU (cinder block). You may also use veneers on poured and cinder walls, while split face comes with a rock-like texture and various colors.
Material | Average Price Per Square Foot |
---|---|
Cinder Block | $10 - $15 |
Poured Concrete | $20 - $25 |
Wood Timber | $15 - $25 |
Stone Veneer | $11 - $15 |
Boulder/Rock | $8 - $12 |
Gabion | $4 - $40 |
Brick | $14 - $15 |
COR-TEN® Steel/Metal | $10 - $20 |
Rammed Earth/Chalk | $3 - $27 |
You don't have to stop at adding a wall: Customize your landscape for outdoor entertaining or resale. If you want to add a kitchen or patio on top of your wall, you'll likely need to plan for a footing in to help bear the extra weight. A few additions include:
Stone Veneer Cost: $35-$50 per sq. ft.
Outdoor Patio Price: $1,800-$5,200
Concrete Footings Price: $30-$100 per linear foot
Landscape Designer Fees: $2,000-$7,000
Stamped Concrete Cost: $2,700-$6,500
Mural Pricing: $800-$1,900
Brick Façade or Veneer: $5-$30 per sq. ft.
Outdoor Lighting Costs: $2,000-$6,000
Fencing Cost: $1,700-$4,000
Outdoor Kitchen Price: $5,500-$22,000
Brick veneers cost $5 to $30 per square foot. You can cut the price further by using thin brick. Your pro attaches the brick one wythe thick against the supporting wall, usually concrete or cinder block.
Stone veneers cost $35 to $50 per square foot on average, with some materials pushing $100 per square foot. It's often rock or concrete molded and colored to mimic rock. Faux stone (concrete) costs $5 to $15 per square foot to purchase and install. Natural veneers cost far more than concrete and don’t usually offer any more protection.
Aside from their aesthetic benefits, stone veneers are highly durable and resistant to pests and rot issues. They are low-maintenance and lightweight, making them much easier to install than full stone walls. You have a few natural and faux choices, including:
Sandstone
Limestone
Slate
Granite
Numerous faux stone styles
Poured concrete retaining walls may require an additional $30 to $100 per linear foot for foundations and pilings. You’ll need these for walls more than four feet high. They’re also necessary for large projects in climates with freeze and thaw cycles that might crack poured concrete. To avoid this price, consider using modular blocks, which allow for slight shifting.
Retaining wall costs vary slightly by location, primarily due to how much reinforcement they'll need to withstand forces applied to the earth they're holding back. Materials and size also play a large role.
Landscape retaining walls: $30 to $150 per linear foot
Driveway retaining walls: $50 to $150 per linear foot
Lake and seawalls: $125 to $200 per linear foot
Service | Cost |
---|---|
Concrete Demolition Cost | $2 - $6 per sq. ft. |
Land Grading Cost | $900 - $3,000 total |
Equipment | $160 - $230 per day |
Materials | $3 - $40 per sq. ft. |
Labor | $50 - $75 per hour |
Landscape Architect Fees | $70 - $150 per hour |
Replacing a retaining wall adds $2 to $6 per square foot for demolition and removal of the old structure. Other pricing comes from the standard design, landscaping and installation fees you’d find with new installs.
The cost of labor for installing a landscaping wall ranges from $10 to $50 per square foot. Blocks with interlocking or pin mechanisms take less time to form and fit together, while monolithic rammed earth slabs require more time and care. You’ll pay an average of $50 to $75 per hour. Several other factors can drive up labor rates quickly:
Over four feet high: Requires footings, reinforcement and scaffolding. This size of wall may also require engineered drawings, which will lead to additional costs.
Access: Easy access allows larger machines to do most of the work. In hard-to-reach areas, you’ll pay more for manual earth moving.
Gate and removal: Additional labor to remove and replace any existing fences should be factored in.
Material | Avg. Labor Cost Per Hour |
---|---|
Wood & Railroad Ties | $15 - $75 |
Concrete Bricks | $60 - $90 |
Concrete Blocks | $60 - $75 |
Dry Stacked Stone | $60 - $80 |
Stone Veneer | $30 - $75 |
Poured Concrete | $60 - $80 |
Retaining wall repairs cost $800 to $1,000 on average. Large projects can run up to $20,000. It’s slightly more than standard wall repair costs of $650 on average. Keep an eye out for leaks, cracks and shifts. The faster you catch a problem, the lower your cost is likely to be. For an exact quote, talk to a local retaining wall repair pro.
While short walls under four feet can make a great DIY project, they can also be hard to get right. Improper installation can lead to failure, causing damage not only to the wall but the surrounding landscape. Some municipalities require an engineer for larger projects.
“If the wall needs to be rebuilt, it will end up costing more in the long run as the pro will will have to disassemble and then reassemble as opposed to doing it correctly the first time around,” says Tara Dudley, Expert Review Board member and professional landscape designer.
Find a local hardscaping company to help evaluate, design and install your next project.
Retaining walls alone don’t always add value, but almost always add curb appeal when combined with other landscaping. Comprehensive landscaping projects can add up to 15% to a home’s value with an average return of 100% to 200%.
“Retaining walls are a nice way to add visual interest, break up plantings, and help with erosion control and overall maintenance of the landscape,” Dudley says.
Retaining walls last five to 100 years, depending on the material they’re made from:
Wood: five-20 years
Concrete: 50-100 years
Metal: 20-100 years