How Much Does Construction Cleanup Cost?
Typical Range:
$275 - $695
Typical Range:
$275 - $695
Cost data is based on actual project costs as reported by 2,221 HomeAdvisor members. Embed this data
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
•
•
•
•
Published January 10, 2022
Written by HomeAdvisor.Construction cleanup costs $470 on average with a typical range between $275 and $695 for residential services. For large projects or those that include multiple visits, you might pay up to $3,000. You’ll spend anywhere from $0.10 to $0.50 per square foot or $30 to $50 per hour for per site cleanup pass.
Construction cleanup gets broken down into two types, rough cleaning which happens during construction by your general contractor, and final cleaning. Most contractors even take care of most of the rough cleanup – removing debris and the bulk of the building waste. And sometimes they’ll even do a deep clean, but not always. For most homes, you’ll want to do a final, thorough cleaning prior to moving into your new home or remodel.
Let's calculate cost data for you. Where are you located?
Where are you located?
National Average | $470 |
Typical Range | $275 - $695 |
Low End - High End | $149 - $1,200 |
Cost data is based on actual project costs as reported by 2,221 HomeAdvisor members.
Post construction cleaning prices for a new residential home are anywhere from $0.10 to $0.50. This specialized deep cleaning comes after the general contractor has removed debris and done a general cleaning during the construction phase. A general contractor usually does most of the overall cleanup. The final step is cleaning out the remaining dust and dirt in cracks, on surfaces and windows. It’s the final step before moving into your remodel or addition. This also happens in new construction, but following several other cleaning steps which we’ll discuss below.
Rough Pass | $0.10 - $0.15 per sq. ft. |
Final Pass | $0.15 - $0.50 per sq. ft. |
Floor waxing and buffing | $1 - $1.50 per sq. ft. |
Carpet cleaning costs | $120 - $250 total |
Touch - ups (fluff) | $0.06 - $0.12 per sq. ft. |
Window cleaning cost | $4 - $11 per window |
HVAC cleaning cost | $250 - $500 |
Post construction clean-up costs $0.10 to $0.50 per square foot. That means the average 2,500 square foot house costs $250 to $1,250 total. You might pay more if you add other services like window cleaning, debris removal or landscaping.
Cleaning windows, interior and exterior, costs anywhere from $3 to $11 per window. This add on services has large price ranges because of both window size and accessibility. Expect to pay double for any exterior work done above the first floor.
New construction cleanup costs anywhere from $0.10 to $1.25 per square foot. If you’re acting as your own general contractor, you’ll need to know about this phased work. Most of this work gets done by your general contractor during the house build. However, they subcontract out the work to specialized companies. The price of this cleaning gets rolled into the price of the home. So, most homeowners won’t need to worry about cleanup on new construction.
Phase | Price |
---|---|
Rough | $0.10 - $0.15 per sq. ft. |
Interior Finish | $0.15 - $0.50 per sq. ft. |
Exterior | $100 - $800 total |
Rough interior cleaning costs $0.10 to $0.15 per service. This generally happens during construction prior to adding the final element, such as floors. This type of construction site cleaning job generally includes all the following:
Sweeping and prepping floor underlayment for carpet, tile, etc.
Washing all interior windows
Dusting surfaces
Removing debris
A final interior scrubbing costs anywhere from $0.15 to $0.50 per square foot. A good final interior cleanup always includes a few key cleaning jobs, including:
Walls, including removing dust, dirt, scuff marks and smudges
Ceilings and light fixtures/fans
All trim, including all baseboards and door and window frames
The faces, sides and tops of doors
Floors, including buffing/waxing if applicable or vacuuming carpet
Ducts, vents and baseboard heating exchanges
Windows, including tracks and frames
Removing all trash, plastic coverings and stickers
Exterior cleaning and junk removal costs range from $100 to $800. Your general contractor usually takes care of most of this. If the job falls to you, you’ll want to hire a local junk and waste removal service or the large debris and a cleaning service for the smaller jobs. This project stage includes:
Removing all trash from the property, including lumber and debris
Washing exterior windows and doors
Sweeping and dusting any entry doorways
Sweeping and/or power washing the driveway and any other paved surfaces
Often, you’ll want to have other ongoing services. You might also find that a housekeeping company does move in cleaning, which might cover post construction work. Some services you’ll want to investigate include:
House cleaning services cost $150-$500.
Deep cleaning a house costs $300-$400.
Commercial cleaning rates run $140-$300.
Hiring a maid costs $100-$250.
There are many factors that contribute to the final cost of any post-construction cleanup job, including:
Size of the home or project. Larger projects command a higher overall price, but usually at a lower per square foot rate.
Supplies and equipment needed (for DIY solutions). If you’re tackling this yourself, you’ll need to supply all the cleaning tools and equipment for dumping. Otherwise, pros provide all of this as part of the price.
Overall condition and accessibility of the property. Expect a hard to access 10th floor apartment to run you quite a bit more than an easily accessed home.
Local competition. If you live in an area where there are several construction cleanup contractors available, you are likely to pay closer to the low end.
Unlike many construction jobs, this makes an excellent DIY project if you have the time and tools. You’ll want to remove all dust and grim since it can be a health hazard. If you’re not sure about your ability to get it all, you can find a local construction cleaner.
It’ll take about 1 hour per every 100 to 200 square feet of space to clean a new construction home. Typically, crews range from 2 to 4 people and clear out a residential home in 1 to 2 days.
To clean up construction dust, follow these steps:
Sweep all large dust up using a standard broom.
Use a soft, damp towel to wipe down all surfaces, including walls.
Vacuum with a shop vac with a certified HEPA filter for floors, cracks and anywhere you see dust. Always use a respirator, eye protection and gloves.
Wet mop any floors you can. Vacuum carpets or shampoo them.
Use air filters to catch what’s left over.
Post construction cleaning costs anywhere from $200 to $1,300 for a residential home.