Rapid Duax Heavy Duty Stapler

Stapler adjusts to accommodate to 170 sheets of paper

I commonly need to staple printed articles and reports of medical journal articles and reviews, as well as other non-medical articles from Browser, etc. They vary in length from a few pages to a hundred or more. The staplers I used to use for heavy-duty stapling came w/ staples of varying lengths/capacities, so I had to first determine the number of pages being stapled, and then find the appropriate size staple for that thickness of papers. Sometimes I misjudged, and sometimes I ran out of the correct-sized staples.

The Rapid Duax Heavy Duty Stapler has eased that task considerably and has done so with a very elegant engineering solution. It uses a single-size staple of considerable length that can handle up to 170 sheets of paper at one strike. If I staple anything smaller than that (which is usually the case — mostly I’m stapling articles of 15-50 pages) the stapler cuts off the excess staple end, before crimping the staple tightly. This all happens automatically upon firmly depressing the arm of the stapler. It’s a very neat engineering trick that solved the need to keep several different-sized staples on hand. The cut-off bits of staple-ends drop into a little container under the bed of the stapler, which I empty out every once in a while.

So now I just stock this single large-sized staple, and the Rapid Duax handles all the rest; I no longer need to waste time bothering about different capacity staples. The stapler is not cheap, but it’s robust and solid, though I did break one when it fell off my desk. I’ve used my current one for the past five or six years without any trouble. It’s a worthwhile investment for someone, such as myself, who frequently has to staple large numbers of pages. I use it several times a day.

This is a Cool Tools favorite from 2017

Rust Buster

Superior loosener

As a DIY’er, Rust Buster is one of my favorite products because it REALLY works. I came across it by accident at a small tractor supply store in southern Missouri. The product typically works instantly, but on heavy-duty applications, I like to apply a little (or a lot) on a rusted or frozen bolt or car part, tap the part lightly to aid penetration, and wait. After a few minutes, rusted bolts, screws, shafts, piping, any types of “frozen” connections and assemblies will now break loose. I have tried a variety of other loosening products, but they tend to use heavier oils that don’t penetrate as well. Smaller hardware stores, and farm supply stores will probably stock it.

(This is a Cool Tools Favorite from 2004 — editors)

Ask a Librarian/List of Useful Websites/Poetry zine

Recomendo: issue no. 275

Sign up here to get Recomendo a week early in your inbox.

Ask a Librarian
Library of Congress, the largest library in the world offers free research assistance by experts. I finally had an excuse to use their service and was blown away by how helpful they were. I had been reading History of the Conquest of Mexico written in 1890, and could not find any information for one of the cited sources which was written 300 years prior, so I submitted a request and — in less than 24 hours — I received a response from the Hispanic Division Reference Librarian who linked me to a digitized copy of the manuscript, and 5 other links to codices of Pre-Hispanic History that I would have never discovered otherwise. It’s such an invaluable resource. — CD

A Reddit list of “useful unknown websites”
This nearly endless Reddit list of useful websites you probably don’t know about is full of gems. Here are a few I discovered:

• RSOE-EDIS is a live world map of emergencies. Icons represent fires, tornadoes, earthquakes, plane crashes, biological endemics, public safety incidents, animal attacks, and more.
• Read Something Great is a curated database of “timeless” articles.
• Flick Metrix is a list of the “top rated movies on Netflix, created by combing ratings from across the web.”
• myNoise has links to a wide variety of tunable white noise generators, ambient sounds, tinnitus reducers, and other interesting audio effects. As I’m writing this, I’m listening to a soothing soundscape called Anamnesis.
• Just the Recipe strips out everything from an online recipe besides the ingredients and instructions.

— MF

Poetry zine
Claudia (CD here) is too modest to recommend this herself, but she puts out a small poetry zine printed on paper that I enjoy. Phantom Kangaroo is 26 pages of illustrated “esoteric” poetry — celebrating the mystical, paranormal, and the ecstatic — contributed by a network of poets she has cultivated the past decade. Current issue (#25) is $13. — KK

Understanding crypto
Crypto is weird, perplexing, silly, revolutionary, overhyped, underhyped, a mania, thrilling, accelerating, and awash in huge oceans of money that make it very difficult to discern what is real and sustainable. I am reading The Generalist, a free website of long “briefs” written by one analyst, to parse what is happening, I still have a zillion questions about crypto, but I have gotten more clarity from here than anywhere else on this confounding subject. — KK

Tuna strainer
I have a smooth-edge can opener and I like it much more than an old-fashioned can opener. My wife complains when she uses it to open a can of tuna, though, because the diameter of the cut lid is too large to squeeze the water out of the can. So I bought this simple tuna strainer. It’s a metal cup with holes in it. Press down on the handles and you can squeeze as much liquid as you want from the can. — MF

Declaration of Enchantment
When I feel uninspired, I like to re-read this Declaration of Enchantment, written by Depth Psychologist Craig Chalquist. There are 15 articles — all outlining the importance of nurturing our imagination. Reading this invigorates my curiosity and infuses me with awe. Below is an excerpt from the Preamble. — CD

We can live a few weeks without food, a few days without water, and a few hours without shelter in an inhospitable clime, but we cannot live for even a moment without some movement of imagination in mind and body. To restrict its enlivening flow is to cripple the wellsprings of health, vitality, and sanity. Enchantment is a self-evident basic right. An assault on enchantment is an assault on the human spirit.

Bonnie Burton, Author and Games Writer

Cool Tools Show 301: Bonnie Burton

Our guest this week is Bonnie Burton. Bonnie is a Los Angeles-based author, games writer, podcaster, YouTuber and journalist. Bonnie Burton writes books about entertainment, pop culture, crafting, drawing, self-help, and humor. Her books range from making-of movie books, crafts, drawing and science books for kids and young adults. Bonnie also writes a number of non-fiction books for licensed properties such as Star Wars, Harry Potter, and DreamWorks. She also writes immersive murder mystery games for Hunt A Killer. You can find Bonnie on Twitter and Instagram @bonniegrrl.

Subscribe to the Cool Tools Show on iTunes | RSS | Transcript | See all the Cool Tools Show posts on a single page

Show notes:

Nordic Ware Haunted Skull Cakelet Pan ($30)
It’s a Nordic Ware Haunted Skull Cakelet Pan. I don’t know why they call it cakelet. For the rest of us oldies, it’s a muffin pan. It’s a skull-shaped mold that you can make ice with. You can make popsicles from it. You can make pizza rolls, Mexican ginger skulls for Day of the Dead and obviously little cakes, but you can also make meatloaf. There’s a great goth YouTuber out of Kansas called Jade the Libra. She shows step-by-step how to make a meatloaf skull from this cake pan. I like the idea of skull as a mold for things.

Silicone Trivets Flexible Durable Non Slip Large Coasters ($12 for 3)
They’re called silicone trivets. They look like a large rubber coasters for hot pans. If you need to move something hot from the stove to the kitchen table, dining room table, you put that on there and it keeps kitchen surfaces and table surfaces from burning if you have something super hot like a casserole or something. But these are such a cool design. They almost look like Spirograph designs. I was going to buy a bunch and put them on my bathroom wall because I like different designs for that, and I don’t want to do wallpaper. But they’re also perfect for opening really tough-to-budge jar lids. I have the upper body strength of a Keebler elf. I have zero weightlifting skills. And because I live alone, I can’t open anything. I don’t want to go to my neighbors because that just seems sad. You cover the lid and then it opens. You just turn it with that, because you have extra grippage. That’s why I got it.

Dusting Gloves ($10 for 3)
They’re super soft. They’re made out of microfiber, which is ideal type of fiber for dusting. You know how a lot of us have used old socks and rags for dusting? Microfiber actually picks up the dust and holds onto it, so it’s not like you’re just wiping dust all over the place. These are actual gloves you wear. They’re almost like mittens. They’re super soft and you wear them. I’m all about the dusting, so I wear these gloves, but then I also have dusting slippers. You can wear them and then you can get into corners that maybe your other dusting apparatuses can’t get into. But they’re also perfect for dusting houseplants. If you have a lot of houseplants that have fragile leaves but you need to get the dust off of them.

5-foot-tall Posable Life-size Skeleton ($40)
It’s a five-foot tall posable life-sized skeleton. You can get these anywhere, but Target right now has it for the cheapest, for 40 bucks. It’s about 60 inches in height, 15.5 inches width, 6.5 inches in diameter. Just imagine any of your friends or family that are five foot tall. That’s how tall the skeleton is. It’s really fun because it’s posable. The ankle joints, knee joints, I’m staring at my skeleton as I’m saying this, the elbow and the shoulder joints are moveable. Hand joints are moveable, too. The skull itself, you can turn around. The jaw is also moveable, so you can have the mouth shut or the mouth open so it’s like, “Hey.” It comes looking like a regular skeleton. You can hang it. I just have him sitting in my living room, staring at me. I put googly eyes in the eye sockets so it’s extra, extra awake. I almost bought a 12-foot skeleton. But I realized because I lived in a loft, I’d either be staring at its crotch the whole time or if I was in bed, it goes all the way up so you see this skull staring in at me while I sleep. I thought, This would be funny until I forget I have this. And then it’s not going to be funny. But it’s only 300 dollars at Home Depot.

About my new RPG game: Hunt A Killer: Agatha Christie’s The Mystery of Hunter’s Lodge

I write for Hunt a Killer, which is fictional murders. It’s a dream job because I plan elaborate murders for these games. They’re marketed as escape rooms in a box. It’s a RPG game. It’s a team who writes it. It’s almost like a TV writers room. We use real world poisons and stuff. Not in real life. We don’t test death on each other. It’s not a how-to. These games are not how to kill people. We do murder mysteries. The cool thing about these games is it’s like you’re a detective that gets suspended, but you take all the information with you and make a murder wall on your wall and try to figure out the murder mystery using autopsy reports and witness statements and clues.

Tape Measure with Right-to-Left Read

Tape reads right-to-left

Not too long ago I stumbled into a YouTube video that opened my eyes wide to a problem I’ve overlooked for way too long – almost all measuring tapes are made for the wrong hand! In that video (0:18 to 1:47), I closely identified with the tape measure problems shown. I’m not a carpenter and so don’t use tape measures often; I just stumbled my way through using usual tapes. Now I know better. I’m right-handed, and write with my right hand – why should I use a tape measure designed to be in my right hand?

I searched a lot of Left-Handed or Reverse tapes; I wanted metric and silly Imperial, and, ironically, most of these tapes still relied on the belt clip standardized on the right-handed side. This one from Perfect Measuring Tape fit my goals. If I’m keeping a pencil in my right hand, I want the tape to be normal on my left side. This one stays left, with both measurement types printed on it. One more problem-source eliminated.

Halloween Prop Making

Gareth's Tips, Tools, and Shop Tales - Issue #100

Did you miss me? Sorry for the silent running. I was busy getting married and making the final move to California. Whew. Glad to finally be settling in.

I will now be returning to regular weekly newsletters, currently publishing on Friday. As always, if you have tips, tool recommendations, favorite maker jargon/slang, or feedback, please share with me.

Halloween Prop Making

Over at Wicked Makers, they created a fun outdoor Halloween display featuring a pirate skeleton fountain. The pirate, sitting in a rum barrel, guzzles wine for all eternity. How charming. There are lots of great tips on creating Halloween haunts in this video, like how to create aged plastic bone using wood stain and bending and posing a plastic skeleton with a heat gun.

For another fun and surprisingly easy Halloween project, check out this Make: video where Caleb demonstrates the popular method of creating skulls from plastic milk jugs using a heat gun and a Halloween skull as a mold.

Working with Wood Models

Via Make: comes this Eric Strebel video on making wooden models. In the video, Eric runs through the very basics of using hobby woods, like balsa and basswood, to create models (for whatever prototyping or other purpose). These days, when we think of prototyping, we tend to think of 3D printing, laser-cutting, and maybe styrene modeling, but wood is always an option, too.

A Shipping Tape Dispenser That Doesn’t Stink?

As you might imagine, we just went through seemingly miles of packing tape in our move across country. Like a lot of folks, I abhor the crummy plastic dispensers and cheap tape that constantly tears (speaking of which, do not buy this tape – it was paper-thin and constantly tearing.) Via Cool Tools, I learned about the apparently decent (and cheap) tape/dispensers at Harbor Freight. I’ll try this product next.

Help People “Close Their Loops”
Working on complex projects (of any kind) is always challenging. Those challenges are quickly compounded as you check in with others on your team and they fail to respond in a timely and thorough fashion. Every one of these outstanding communications becomes an “open loop” that remains a worry/to-do list item until it’s responded to. You can do a huge favor to those along the project’s work chain by responding in a timely fashion and answering all questions asked.

Maker Slang
Mother color – I recently learned of a new (to me) painting technique, called mother color. This is when you pick a thematic color and add that color to every other color in a painting, miniature, model, etc. to create color harmony throughout the piece. Here’s a video detailing the technique.

Tear out (or chip out) – What happens when the grain of wood along an edge being cut cannot support itself and tears away along the cut. Methods of preventing tear out include using painter’s tape along the cut line and pre-scoring the line with a razor knife.

More on End-Grain Gluing
In the last issue, we included a link to a video on Patrick Sullivan’s YouTube channel where he tested the strength of end-grain gluing and found that such a bond can actually be quite strong (contrary to popular belief). This led to much misunderstanding of his findings, some useful discussion, and numerous response videos. Here’s a great video from James at Stumpy Nubs with further clarification of what Patrick actually tested and how people misunderstood his findings. As Patrick himself points out in the comments to Stumpy’s video:

Thanks for what I feel is a fair commentary on my video about end-grain glue. If viewers came away from the Glue Myths video with the idea that I am promoting end-grain joints, or that they should start making furniture out of 3″ square blocks, then I failed to convey my thoughts clearly enough. I am trying to put together some objective, factual information about how glue works. My hope is that this information will be used as a tool by savvy woodworkers to design joinery that is strong enough to perform its intended purpose.

Comparing Deep Hole Pattern Markers

On the Cool Tools channel, our pal Donald Bell takes a look at three different deep hole pattern markers, the Pica, the FastCap, and the Dixon. I’ve been using FastCap markers for years now and love them, although I agree with Donald that the tip is a little wider than I’d like. He doesn’t declare a winner. Each makers has its strengths and drawbacks.

New Take on the Book Nook

Last issue, I included the term “book nook,” a popular form of crafting right now. These nooks are little book-themed dioramas that slot between books on a shelf. I saw this ad for a commercial book nook maker where all of the characters in the nooks “break plane,” 3D art that emerges from the nook, something I haven’t seen in homemade book nooks. Yet.

Shop Talk

Reader Marty Lindal writes:

“Another source for moving boxes: When evaluating moving companies, ask if they can provide free used boxes. I’ve moved locally with the same mover about 5 times and he always offers both new boxes for purchase or free used boxes and free tape and packing paper. As you know, these things add up. And he’ll pick up the boxes when you are done with them.”

(Gareth’s Tips, Tools, and Shop Tales is published by Cool Tools Lab. To receive the newsletter a week early, sign up here. — editors)

What’s on my kitchen counter? — Seth Godin