Oh no! Some styles failed to load. 😵 Please try reloading this page

Activity for ONVIF Device Manager

  • VB42 VB42 created ticket #12

    Convert WinFormSample to dll

  • ks1 ks1 posted a comment on discussion Open Discussion

    Answering my own question: open Powershell as admin change to directory where you downoaded the .msi file run MSIexec command MSIexec /i odm-v2.2.250.msi

  • ks1 ks1 posted a comment on discussion Open Discussion

    Anyone know how to overcome this?: Refuses to install to local hard drive (bug reported over a year ago) Trying to install to default directory C:\Program Files (x86)\Synesis\ONVIF Device Manager\ returns message: " installation directory must be on a local hard drive" (It is local)

  • Mike Brown Mike Brown posted a comment on discussion Help

    This is weird, I have just re-visited my ONVIF session which I had left running since my post above and now I am able to alter parameters.

  • Mike Brown Mike Brown modified a comment on discussion Help

    Hi, I have run up the latest version of ONVIF manager V2.2.250 and although it displays all my cameras correctly and I am able to view all parameters I am unable to change them. Any ideas please?

  • Mike Brown Mike Brown posted a comment on discussion Help

    Hi, I have run up the latest version of ONVIF manager V2.2.250 and although it displays all my cameras correctly and I am able to view all parameters I am unable to change them. I am sure that with an earlier version of ONVIF manager this worked unfortunately I cannot say which version that was as I had a hard disk crash and I lost the app. Any ideas please?

  • Jasper Cai Jasper Cai posted a comment on discussion Help

    I found a "solution", if I disable Integrated Graphics, then I can have the live video.

  • Calvin Arndt Calvin Arndt posted a comment on discussion Open Discussion

    Camera is ANNKE 121G DFM recognizes this camera fine and clicking on "Live Video" opens the stream as expected. Yet the url shown below the stream does not open the stream in vlc. progress bar at bottom of vlc moves back and forth yet, no error, no stream. rtsp://192.168.1.10:554/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp?real_stream

  • Jasper Cai Jasper Cai posted a comment on discussion Help

    After clicking "Live Video" or "Video Streaming" for about 1 mintue, ODM shows "No signal". When I connect camera to NVR, the video streaming can keep live. Does anyone who knows how to fix this? Appreciate it.

  • Jasper Cai Jasper Cai posted a comment on discussion Help

    I am not sure what the problem is on my PC, can have the camera in Device List, but when I click "Live Video" or "Video Streaming", all I can get is a black interface, no images. However, I can use the same rtsp address to get the stream on VLC player. It's odd. When I tried to install ODM on another 2 computers, just the same installation process, the 2 computers can get images when clicking "Live Video" or "Video Streaming". Hope someone can help me fix the issue.

  • strarsis strarsis created ticket #7

    H265 / H265+ support

  • Peppe Calvo Peppe Calvo modified a comment on discussion Help

    so like my object i have a couple of victure camersa tha are well recognaized from onvif device manager. a couple of month ago i setted my infrastucture i changed setting without problem first of all the rstp port. today a resetted one of the camera but i'm no able to store the new port. onvife devise manager seem aply new port but it is not so. have you any idea? the camera firmware ia aleasys the same. dont remember wich version of ODM i used.... i do everything between april and may 2020. here...

  • Peppe Calvo Peppe Calvo modified a comment on discussion Help

    so like my object i have a couple of victure camersa tha are well recognaized from onvif device manager. a couple of month ago i setted my infrastucture i changed setting without problem first of all the rstp port. today a resetted one of the camera but i'm no able to store the new port. onvife devise manager seem aply new port but it is not so. have you any idea? the camera firmware ia aleasys the same. dont remember wich version of ODM i used.... i do everything between april and may 2020. here...

  • Peppe Calvo Peppe Calvo posted a comment on discussion Help

    so like my object i have a couple of victure camersa tha are well recognaized from onvif device manager. a couple of month ago i setted my infrastucture i changed setting without problem first of all the rstp port. today a resetted one of the camera but i'm no able to store the new port. onvife devise manager seem aply new port but it is not so. have you any idea? the camera firmware ia aleasys the same. dont remember wich version of ODM i used.... i do everything between april and may 2020. here...

  • Boci Levu Boci Levu posted a comment on discussion Open Discussion

    Does this software allow specific target storage hard drives to be selected, so that if a 'surveillance' grade drive is installed on the computer this can be used?

  • yaretiree yaretiree posted a comment on discussion Open Discussion

    I have the answer. This video shows how https://www.youtube.com/watch?v=_PwpFG6tJsY You Select the profile (Main or Sub stream) of the camera you are interested in, then Live video to see the url.

  • yaretiree yaretiree posted a comment on discussion Open Discussion

    I have the same question about how to determine a camera's substream address. If that could be shared in a response here it would be appreciated!

  • Reinhard Schmid Reinhard Schmid created ticket #11

    ODM authenfication problem with Foscam FI9831W

  • PeterPlace PeterPlace posted a comment on ticket #9

    I have exactly the same problem with hikvision camera's , it does not matter with wich user and pass i login it says always , locked out for 30 minutes. Even if i use the admin login from the camera??? So what do i wrong or is the program the problem??

  • chickencam chickencam posted a comment on discussion Help

    got it working now, i used the wrong port

  • chickencam chickencam posted a comment on discussion Help

    hi everybody, i have a camera d link 933 L and i try to find the rtsp address so i can use it on vcl player , but for some reason it doesnt show the rtsp in onvif device manager, my other camera that connected to the same network show up just fine, i also try to use ispy security program to scan it but it show nothing , but i cant still login into the cam use browser, anyone know how to fix this, ty :)

  • Armineus Armineus modified a comment on discussion Open Discussion

    Hi, Could you tell me please how you have compiled ffmpeg? Have you defined enable-gpl or enable-nonfree? Thanks for your answer

  • Armineus Armineus modified a comment on discussion Open Discussion

    Hi, I have reused your version of the libraries ffmpeg in a project. Could you tell me please how you have compiled ffmpeg? Have you defined enable-gpl or enable-nonfree? Thanks for your answer

  • Armineus Armineus posted a comment on discussion Open Discussion

    Hi, I have reused your version of the libraries ffmpeg and live555 in a project. Now it turns out this project might go commercial. Could you tell me please how you have compiled ffmpeg? Have you defined enable-gpl or enable-nonfree? Thanks for your answer

  • Tim Tim posted a comment on discussion Open Discussion

    Kind of new to ONVIF stuff, but looking through the source code.. all I want to do is set Exposure Time.. I think I understand how to get connected (user/pw) and authorization to the service.. but I was hoping to see how the application does the "Image Settings" part and it seems to be in the onvif.services.dll for which I can see no form nor source code.

  • Ernest Ernest posted a comment on discussion Help

    hola soy nuevo es esto de onvif me gustaria saver como puedo reproducir el video en la gpu

  • Tsutomu Kaneyasu Tsutomu Kaneyasu posted a comment on discussion Open Discussion

    Hi, I have implemented the code to take a snapshot from the ONVIF camera using ONVIF Device Manger DLL. private static void Snapshot(string[] parameter, string imgfilename) { string camera_ip = "http://" + parameter[0] + "/onvif/device_service"; Uri Camuri = new Uri(camera_ip); System.Net.NetworkCredential account = new System.Net.NetworkCredential(parameter[1], parameter[2]); NvtSessionFactory sessionFactory = new NvtSessionFactory(account); INvtSession session = sessionFactory.CreateSession(Camuri);...

  • Tsutomu Kaneyasu Tsutomu Kaneyasu posted a comment on discussion Help

    I have implemented the code to take a snapshot from the ONVIF camera using ONVIF Device Manger DLL. private static void Snapshot(string[] parameter, string imgfilename) { string camera_ip = "http://" + parameter[0] + "/onvif/device_service"; Uri Camuri = new Uri(camera_ip); System.Net.NetworkCredential account = new System.Net.NetworkCredential(parameter[1], parameter[2]); NvtSessionFactory sessionFactory = new NvtSessionFactory(account); INvtSession session = sessionFactory.CreateSession(Camuri);...

  • Giuseppe Giuseppe posted a comment on discussion Help

    Finally solved replacing the URI video player from video.player to LibVLCSharp . Now I can use reflection without problems.

  • Andrew Andrew created ticket #10

    64 Bit

  • Giuseppe Giuseppe modified a comment on discussion Help

    Hello, I developed a windows form control library based on your Window Form example. When I include my dll as reference inside a Windows Form Application all goes fine and I can see the video stream. When in my application I try to use reflection to load the dll "dinamically" I have two different behaviour: When my dll and its dependecies are in the same path of the application, all works right and I can see the video stream; When the my dll and all its dependecies has not the same path of the application...

  • Giuseppe Giuseppe posted a comment on discussion Help

    Hello, I developed a windows form control library based on your Window Form example. When I include my dll as reference inside a Windows Form Application all goes fine and I can see the video stream. When in my application I try to use reflection to load the dll "dinamically" I have two different behaviour: When my dll is in the same path of the application, all work right and I can see the video stream; When the my dll and all its dependecies has not the same path of the application I can't see...

  • Mauro Anzola Mauro Anzola posted a comment on discussion Help

    When I load dinamically a dll created in Vb.net I receive this error: "Found conflicts between different versions of the same dependent assembly" related to FSharp 4.3 Vs Fsharp 4.7. If I add the dll contorl on a form and I set the flag "Auto-generate binding redirects" all is working but I need to load the dll dinamically with Assembly.LoadFrom... and I cannot set this flag

  • Adam Farber Adam Farber posted a comment on discussion Open Discussion

    Hi Kim or Andrey, can you tell me where in the software can I see the sub stream string? I can only see the main string. Thanks, Adam Farber

  • Adam Farber Adam Farber posted a comment on discussion Open Discussion

    Hi all, does anyone know if this software can show me the substream settings? I can see the main stream but can not see the sub stream. Any help apprec iated. Thanks, Adam

  • Martin Martin posted a comment on discussion Help

    You can change it to 0 because udp = 0 Dim transp As MediaStreamInfo.Transport = 0 But i have another error what i dont know how to fix it... Me.disposables.Add(factory.CreateSession(New Uri() {New Uri(address)}).ObserveOnCurrentDispatcher(). Subscribe(Sub(session) GetProfiles(session), Sub(err) Me.errBox.Text = err.Message)) Error message: Error BC30456 'Subscribe' is not a member of 'FSharpAsync(Of Profile())'.

  • Ron C Ron C posted a comment on discussion Help

    Hello, I used the Onvif Device manager a good long while ago, I installed 2.2.250 (I assume that is the newest one). Is there a way to have teh Onvif device manager scan a certain network, or IP range? The machine I am wiking with is multi home.. and has a hard time finding cameras. thanks, Ron

  • Doron Doron posted a comment on discussion Help

    ron HP I see your question is from more than a year ago. Have you find an answer? Thanks.

  • Doron Doron posted a comment on discussion Help

    Same problem here. But looking at the rtsp address that ODM automatically finds, it does contain a password. This is not the password that I have set in the camera, but it is some variation of it. It is changed when I change password of the camera. It looks like the camera is snitching to ODM about its own password. I went over all camera settings and I can't find anything that might do that.

  • Walter Cantrell Walter Cantrell modified a comment on discussion Open Discussion

    In another thread a link was provided for a sample console app: https://sourceforge.net/projects/onvifdm/files/console_net4_0/EventsConsole.zip/download Does anyone know how to implement filters with these events?

  • Walter Cantrell Walter Cantrell posted a comment on discussion Open Discussion

    In another thread a link was provided for a sample console app: https://sourceforge.net/projects/onvifdm/files/console_net4_0/EventsConsole.zip/download I'm trying to use this with my device, but I'm getting an error that my device does not support anonymous authentication but needs Digest Authentication. I'm aware that my device needs this, but I'm not sure where to make the change in the code.

  • Kevin Korotev Kevin Korotev posted a comment on discussion Help

    The attached image is the prompt I get whenever trying to "edit" an ONVIF Device Manager profile. There are also a few menu items I am locked out completely. I am the administrator. Ideas? Kevin

  • arslanmehboob arslanmehboob posted a comment on discussion Help

    i also faced this problem any body help me plz ,how resolved this problem?????

  • arslanmehboob arslanmehboob posted a comment on ticket #42

    anyone response still waiting ??? video player.host.exe not deploy succeeded in winform example after publish error!

  • arslanmehboob arslanmehboob created ticket #42

    winforms after publish Error

  • Andrey Vrana Andrey Vrana posted a comment on ticket #6

    Hi. Please use my skype for more promptly discussing [email protected]

  • fettkeewl fettkeewl created ticket #6

    security:mustUnderstand Optional please!

  • David Irwin David Irwin posted a comment on discussion Help

    Hi, First time posting so hope I have included the right information. I have downloaded the ONVIF device manager to get the stream addresses for my new security camera but am having an error when trying to run the software. I have attached a screenshot plus a WireShark capture of the response from the camera. Any assistance on why this may be happening would be appreciated. David

  • wqdgdd wqdgdd posted a comment on discussion Open Discussion

    there is a data stream over srtp,can odm support it? (i want to send sterram under secret(srtp：secure rtp)) if yes. could you kindly show me the steps or usefull imformation?

  • Andrey Vrana Andrey Vrana posted a comment on discussion Open Discussion

    Hi Marco! I'm afraid i can't help you with Your issue. We were never faced with the such issue during the development. What I can suggest - check the camera's web page settings. Maybe some of them overrides Onvif's ones. Regards, Andrey Vrana

  • Ufficio Tecnico Ufficio Tecnico posted a comment on discussion Open Discussion

    Guys, Sorry to bother, but I have an issue I'm not able to resolve and I need your help. I have 6 Q1941 Axis and I'm using 2 onvif profiles on each of those camera. Exactly the same configuration on every camera. Everything works fine on 5 out of 6 cameras and there's one of them which shows Live Video Stream with an image rotated by 90 degrees. I've checked again every passage and it's the same on every device. Other cameras work just fine. I don't know what's going on, can you just give some input...

  • Patricia Patricia modified a comment on discussion Help

    Hello. I am looking for some major improvments in work with our medical devices. I know It cost some time but what do you think about https://pro4people.com/medical-device-software-development/ consulting company. Is it worth time and money to contact them and try to find a good software with their help?

  • Patricia Patricia posted a comment on discussion Help

    Hello. I am looking for some major improvments in work with our medical devices. I know It cost some time but what do you think about https://pro4people.com/contact/ consulting company. Is it worth time and money to contact them and try to find a good software with their help?

  • Tom Tom posted a comment on discussion Open Discussion

    Hi, 1) I am using a recet 4MPHikvision camear with ONVIF support turned on. The live view on the camera GUI page works fine both H.264 adn H.265. ODM can log into the camera fine, and I can see things in the top area, but when I press live view, it hangs for a bit then says no signal... I have tried setting the camera to H.264 and 5. Any ideas? 2) Is there a way to create any reports from this? For example, if I had 4 cameras connected, is there a way to gather up the settings and export them? Something...

  • Bob Palmer Bob Palmer posted a comment on discussion Open Discussion

    yes i did i have that one installed. but in the you tube you show a program for monitoring the cameras outside of this manage program where is that program at? thanks From: Bob Palmer <[email protected]> To: [email protected] Sent: Monday, April 8, 2019 11:44 AM Subject: [onvifdm:discussion] Re: software for onvif cameras andrey i did try than in fact i was trying it when i sent an email. it found all 3 cameras but the sdeter camera it will not do anything...

  • Bob Palmer Bob Palmer posted a comment on discussion Open Discussion

    andrey i did try than in fact i was trying it when i sent an email. it found all 3 cameras but the sdeter camera it will not do anything with. i get the error underlying connection was closed with everything i tr it on using that sdeter camera. identification i get the scope is emptytime validation failed local time sent by devicemaintenance unsupportednetwork settings it will not let me do anything i tried to do dhcp to off and apply i get the underlying connection was closeduser management i try...

  • Andrey Vrana Andrey Vrana posted a comment on discussion Open Discussion

    Hi. Did You try the Onvif Device Manager? https://sourceforge.net/projects/onvifdm/files/onvifdm-v2.2.250/odm-v2.2.250.msi/download What you describe is exactly what it does.

  • Bob Palmer Bob Palmer posted a comment on discussion Open Discussion

    i'm looking for some kind of program that will let me get into my onvif cameras and be able to change the user names and passwords on the cameras. lus changine the ports and ip addresses if needed? i have the zmodo dvr and that lets me change this info plus i have nepcoolcams and the app lets me change these. also i have aprgram that lets me change all the i wifi cams i have, but that program fails to see the onvif cameras. i tried ispy and that fals. the program i found here sees the cameras but...

  • Teja Teja posted a comment on discussion Help

    Dear tan, Thanks a lot for the hint, but ive been facing a problem with the line "Profile[] profiles = mediaClient.GetProfiles();" The following is the problem I'm facing: "NO overload Method for the GetProfiles with zero arguments" Im using WPF sample program given and I'm trying to take a snapshot of the stream. Please help and thankyou. PS. Im not using webreferences, instead I'm using all dlls and required namespaces given in the code - WPFsample.

  • steve steve posted a comment on discussion Open Discussion

    here is the picture of ONVIF authentication disabled by Q-see online tech. It still does not work after their help?? Tech will contact me further but never heard anything back. Not sure why the camera still requires authentication? log in box still pops up even using Web Page option within ONVIF to live view the camera?

  • steve steve modified a comment on discussion Open Discussion

    here is the no signal picture after ONVIF user authentication was disabled.

  • steve steve posted a comment on discussion Open Discussion

    here is the no signal picture after ONVIF user authentication was disabled.

  • steve steve modified a comment on discussion Open Discussion

    here is how I use ONVIF device manager to live view my bullet camera using my Laptop and POE switch.

  • steve steve posted a comment on discussion Open Discussion

    here is how I use ONVIF device manager to live view my bullet camera using my Laptop and POE switch.

  • steve steve modified a comment on discussion Open Discussion

    I cannot disable user authentication on ONVIF for my new Q-see 1080p camera (QCN8082b) ? please help! The camera came without any instructions. See the map of my setup to live view the camera using my windows 10 Laptop after I logged in with the admin/admin for username and password after downloaded/installed ONVIF device manager onto my Laptop. My problem is I need to have the ONVIF user authentication disabled for my Raymarine MFD (multifunction display) for boating purpose. I need to stream my...

  • steve steve posted a comment on discussion Open Discussion

    I cannot disable user authentication on ONVIF for my new Q-see 1080p camera (QCN8082b) ? please help! The camera came without any instructions. See the map of my setup to live view the camera using my windows 10 Laptop after I logged in with the admin/admin for username and password after downloaded/installed ONVIF device manager onto my Laptop. My problem is I need to have the ONVIF user authentication disabled for my Raymarine MFD (multifunction display) for boating purpose. I need to stream my...

  • Patricia Patricia posted a comment on discussion Help

    Very helpful thread, thank you guys! I was also searching for more information regarding medical devices software and blog - pro4people.com was also very informative. Maybe some of you find something interesting there. Cheers!

  • wqdgdd wqdgdd posted a comment on discussion Help

    Excuse me, i want to use https(TLS) to commitcate with my server. Now ,my step is as following: 1,start a http server use port 80. 2,,for odm,first i change Networking settin. set http:disable https:enable rtsp:enable 3,then on "certificates" tab ,i upload the cacert.pem. 4,on server side i give back certificate id,and the public key(fill the structure). and set the certificate status true. 5,after that i use soap_ssl_accept to get the message from odm.(still use 80 port) 6,i thought odm should use...

  • bruno brito costa bruno brito costa posted a comment on discussion Help

    Ola get the same problem, an underlying game of being full, depending on the unexpected way, what to do? and are you here?

  • wqdgdd wqdgdd posted a comment on discussion Open Discussion

    Excuse me, i want to use https(TLS) to commitcate with my server. Now ,my step is as following: 1,start a http server use port 80. 2,,for odm,first i change Networking settin. set http:disable https:enable rtsp:enable 3,then on "certificates" tab ,i upload the cacert.pem. 4,on server side i give back certificate id,and the public key(fill the structure). and set the certificate status true. 5,after that i use soap_ssl_accept to get the message from odm.(still use 80 port) 6,i thought odm should use...

  • andrey shchepetov andrey shchepetov posted a comment on discussion Open Discussion

    Hello. With new cameras got an issue with disabling DHCP server. Problem is that disabling the DHCP in ONVF device manager and setting manual IP works only partially - IP remains the same until DHCP server is met. If i disable DHCP, set manual IP and connect to camera with Internet Explorer - i can see my manual IP but DHCP is ON and Adaptive IP is ON too. In IE i have to disable both - DHCP and adaptive IP to be able to set the IP address. If i disable DHCP in ONVIF device maneger, then switch camera...

  • Andrey Vrana Andrey Vrana posted a comment on discussion Help

    Hi! It looks like Your cameras has allowed for the anonimouse access for the vidoe stream. Please check permissions and security settings on our cameras settings.

  • ron HP ron HP posted a comment on discussion Help

    I have four ONVIF compliant IP cameras connected on the same network. Each one has custom user and password assigned via their web pages. Why is it that the ONVIF device manager can display the cameras video without my giving the software any usernames and passwords. The software does detect my user names. And it seems also the associated passwords. There seems to be a security issue here

  • Rik Rik modified a comment on discussion Open Discussion

    Whenever I try to connect to a camera with the unchanged WinForm example I get the following error: System.MissingMethodException: 'Method not found: Microsoft.FSharp.Control.FSharpAsync`1<odm.core.invtsession> odm.core.NvtSessionFactory.CreateSession(System.Uri[]).'</odm.core.invtsession> I saw that the user 'heroius' posted a review that stated an issue with duplicate method names. Am I facing the same issue right now?

  • Rik Rik posted a comment on discussion Open Discussion

    Private: No Whenever I try to connect to a camera with the unchanged WinForm example I get the following error: System.MissingMethodException: 'Method not found: Microsoft.FSharp.Control.FSharpAsync`1<odm.core.invtsession> odm.core.NvtSessionFactory.CreateSession(System.Uri[]).'</odm.core.invtsession> I saw that the user 'heroius' posted a review that stated an issue with duplicate method names. Am I facing the same issue right now?

  • Rik Rik created ticket #41

    MissingMethodException at runtime with WinForm example

  • Yuniesky Armentero Moreno Yuniesky Armentero Moreno posted a comment on ticket #4

    I have the same problem. How to compile this project. Can anybody help me?

  • Kateline Driessens Kateline Driessens posted a comment on discussion Open Discussion

    Hello! I cannot change the encoding interval for any of the camera i own via the onvif device manager... I wonder if that is normal? Is there a particular manip to do to enable the modif of this parameter? Thanks a lot in advance for your help! Best, Kateline

  • Krishna Prasad Krishna Prasad posted a comment on discussion Open Discussion

    Hello Is there a roadmap to make this work on .NET standard 2.x/Xamarin?

  • Andrey Vrana Andrey Vrana posted a comment on discussion Help

    Hi. please look in the source, where this process starts (find bythefile name) You cam seb breakpoint to find the reason of tis issue. This sample was written a long tie ago, and was used only as example of the odm.dll usage.

  • Jose Luis Jose Luis posted a comment on discussion Help

    I'm testing the "WinformSample" project and after close the app, the "video.player.host.exe" stay on memory. If I run the app again, another "video.player.host.exe" is started and don't close too. What's not disposing in the source code?

  • Alan Paterson Alan Paterson posted a comment on discussion Help

    HI, Is it possible to push out ONVIF username and password to multiple connected cameras at the same time? Something like click on one camera, shift click or ctrl click on others to push out ONVIF credentials. Thanks in advance Alan

  • B.Bauhaus B.Bauhaus posted a comment on discussion Open Discussion

    Did you ever fix this. I have the same problem. With iSpy i have a continious stream but with Onvif Device Manager it stops every now and then.

  • Peter Hunag Peter Hunag posted a comment on discussion Help

    Sorry, I don't know what you mean. You think Onvif Device Manager send correct message ? So the problem is gSOAP need to modify ttBackupFile structure to fit the receiving data? Thanks.

  • Andrey Vrana Andrey Vrana modified a comment on discussion Help

    As onvif specificatio says: 4.5.6 System Restore The System Restore capability allows a device’s configuration to be restored from a backup image. Again two mechanisms are provided. The first uses the RestoreSystem command to send the backup image using MTOM. The second uses the StartSystemRestore command followed by an HTTP POST operation to send the backup image. function RestpreSysrrn should send backup image MTOM (inside message body) I think the problem is on the other side. Regards, Andrey...

  • Andrey Vrana Andrey Vrana posted a comment on discussion Help

    As onvif specificatio says: 4.5.6 System Restore The System Restore capability allows a device’s configuration to be restored from a backup image. Again two mechanisms are provided. The first uses the RestoreSystem command to send the backup image using MTOM. The second uses the StartSystemRestore command followed by an HTTP POST operation to send the backup image. function RestpreSysrrn should send backup image MTOM (inside message body) I think problem is on other side. Regards, Andrey Vrana

  • Peter Hunag Peter Hunag posted a comment on discussion Help

    Hello, I use the Onvif Device Manger this two days. I find a problem that I don't know how to solve it. Test Environment: ONVIF Device Manager: version 2.2.250 gSOAP: version 2.8.65 I push the Restore button on the Onvif Device Manager, and I Know it will call the tdsRestoreSystem(...) function. But I can't get the backup data. The problem is the XML data sent by the Onvif Device Manager, as following: <RestoreSystem xmlns="http://www.onvif.org/ver10/device/wsdl"> <BackupFiles> <Name xmlns="http://www.onvif.org/ver10/schema">/first</Name>...

  • Peter Hunag Peter Hunag posted a comment on discussion Help

    Hello, I use the Onvif Device Manger this two days. I find a problem that I don't know how to solve it. Test Environment: ONVIF Device Manager: version 2.2.250 gSOAP: version 2.8.65 I push the Restore button on the Onvif Device Manager, and I Know it will call the tdsRestoreSystem(...) function. But I can't get the backup data. The problem is the XML data sent by the Onvif Device Manager, as following: <RestoreSystem xmlns="http://www.onvif.org/ver10/device/wsdl"> <BackupFiles> <Name xmlns="http://www.onvif.org/ver10/schema">/Test.cfg</Name>...

  • Peter Hunag Peter Hunag posted a comment on discussion Help

    Hello, I have the same question about this restore problem. Do you solve this problem? Or anyone can help us? I really need help, thanks.

  • Chris McDonald Chris McDonald posted a comment on ticket #9

    https://sourceforge.net/u/michaelkuz/

  • Chris McDonald Chris McDonald posted a comment on ticket #9

    Still looking for help. Is there a number I can call?

  • Chris McDonald Chris McDonald created ticket #9

    OnVif login

  • Tony Jones Tony Jones posted a comment on discussion Open Discussion

    I was wondering why you didnt post what you did to fix the problem. I recently had the same issue.

  • drosengarden drosengarden posted a comment on discussion Help

    Also - I just dug into the web page and that viewer on the web browser login is also calling the RTSP address (using a depricated Apple QuickTime ActiveX plugin. I can plug this RTSP address into VLC no problem, but again, th e stream has the 2 second delay. ONVIF Device Manager is clearly accessing the feed from the camera on the network with something that allows the stream to be almost immediate real time (NO DELAY). Anyone with the clue that leads to my success in streaming this same "NO DELAY"...

  • drosengarden drosengarden modified a comment on discussion Help

    Andrew - thanks. That is a good suggestion; however, the camera gives no image through the browser ip login.

  • drosengarden drosengarden posted a comment on discussion Help

    Andrew - thanks. That is a good suggestion; however, the camera gives no image through the browser ip login.

  • andrew ignatov andrew ignatov modified a comment on discussion Help

    Can you login to your camera in the browser by ip? I think it have web interface.

  • andrew ignatov andrew ignatov posted a comment on discussion Help

    Can you login to your camera in the browser by ip?

  • drosengarden drosengarden posted a comment on discussion Help

    Hi - I successfully used your software to access my TOP-201 ip camera. When I look at the Live View or Video Streaming, the camera preview is almost exactly real time (no delay). I'm trying to record this using OBS. However, when I use the RTSP address your software provides, the OBS view of the camera has an almost 2 second delay. My audio microphone is significantly out of sync with the video. My question ultimately is how could I get access to the same version of the camera stream that your software...

  • drosengarden drosengarden modified a comment on discussion Open Discussion

    Hi - I successfully used your software to access my TOP-201 ip camera. When I look at the Live View or Video Streaming, the camera preview is almost exactly real time (no delay). I'm trying to record this using OBS. However, when I use the RTSP address your software provides, the OBS view of the camera has an almost 2 second delay. My audio microphone is significantly out of sync with the video. My question ultimately is how could I get access to the same version of the camera stream that your software...

1 >

Get latest updates about Open Source Projects, Conferences and News.

Sign Up No, Thank you