Reviewed & Approved on September 8, 2020 by Cati O'Keefe, Expert Home Building & Sustainability Contributor.
Written by HomeAdvisor.
Kitchen cabinets range widely from $100 to $1,200 per linear foot. A typical 10-by-10-foot kitchen would run anywhere from $2,000 to $24,000, though most fall in the range of $4,000 to $13,000. You can expect to get anywhere from 65% to 80% return on your cabinet and kitchen remodel investment when you sell your home.
Reviewed & Approved on September 8, 2020 by Cati O'Keefe, Expert Home Building & Sustainability Contributor.
Written by HomeAdvisor.
National Average | $5,365 |
Typical Range | $1,824 - $8,984 |
Low End - High End | $240 - $20,000 |
National Average | $2,896 |
Typical Range | $1,759 - $4,032 |
Low End - High End | $700 - $6,400 |
National Average | $297 |
Typical Range | $131 - $464 |
Low End - High End | $50 - $910 |
Cabinets help define the look and usability of your kitchen. If you have a dated or difficult-to-use design, your kitchen could be falling short of its full potential as the entertainment and meal-prepping focal point of your home. Installing a new design will improve its looks and usability - and boost the appeal of your home. Here's a comprehensive guide on design, costs and materials.
The linear foot pricing of $100 to $1,200 includes everything from off-the-shelf to high-end custom options. The construction breaks down into these three categories, each with its own price point and specific set of pros and cons:
Type | Price Per Linear Foot | Price Per Unit |
---|---|---|
Stock | $100 - $300 | $200 - $650+ |
Semi-Custom | $150 - $650 | $250 - $800+ |
Custom | $500 - $1,200 | $500+ |
Stock cabinets are the most affordable option available to homeowners at $100 to $300 per linear foot installed, or $50 to $100 per linear foot for cabinets alone. Stock or builder’s-grade construction comes with fewer design options, but costs considerably less than semi-custom and custom alternatives.
Quality and measurement issues are sometimes a problem with prefab types. Be sure to carefully measure the location of your new install before making any purchases. If you're unsure, have a cabinet professional measure your space.
If you have a larger budget or need custom sizing or aesthetics, semi-custom designs offer a wider variety of options at $150 to $650 per linear foot installed. The materials alone cost $75 to $400 per linear foot, or $150 or more per unit. Semi-stock is perfect for homeowners looking for unique, long-lasting types without the hefty price of custom designs.
Custom cabinets cost $500 to $1,200 per linear foot installed. Materials make up between $300 and $750 per linear foot. They’re perfect for oddly-shaped kitchens or specific design and functionality needs. While custom installs meet your exact specifications, you can expect a substantial cost increase.
Plywood with Solid Wood: Most high-end semi-custom and many custom installations use a combination of plywood and solid wood. The cabinet boxes use plywood with real wood veneers for the boxes and solid wood or plywood with veneers for doors and drawers. Manufacturers use real wood for structural supports and sometimes the cabinet faces.
MDF: Most stock and some lower-end semi-custom varieties use medium density fiberboard (MDF), also called particleboard, with a thin plastic veneer applied to the top.
Solid Wood: It is rare to find any custom installation that is 100% solid wood. High-end plywood tends to hold up better to use, doesn’t warp in moist environments and has a higher mechanical strength than solid wood. Once applied, real wood veneer looks, feels and functions as well as or better than solid wood.
It's important to also consider the mass appeal of your materials. Exotic designs and materials could potentially hurt the resale value of your home. The materials you choose depends on your budget and design. Here's a breakdown of the most popular materials:
Wood Veneer | $2,000 - $15,000+ |
Laminate | $4,000 - $15,000 |
Wood | $5,000 - $25,000+ |
Acrylic | $5,000 - $20,000 |
Stainless Steel | $25,000 - $38,000 |
Wood ranges from $5,000 to $25,000 or more. You’ll only pay an average of $5 per linear foot difference between varieties, so choose the one that best complements your home design. Here's a quick look at a variety of sought-after wood types:
Wood veneers cost anywhere from $2,000 to $15,000 or more. They are strips of wood applied to plywood or particleboard. They offer the same look and feel of wood without the higher price tag. Also, some veneers are more resistant to humidity and moisture than traditional wood. You can stain them to match other decorative features of your kitchen.
Stainless steel runs $25,000 to $38,000. Because of the price and aesthetic, it’s a less common material than wood, laminate or veneer. Regardless, many homeowners are opting for stainless because of its durability, look and extremely long lifespan.
These types are recyclable and non-toxic, which works well if you want an environmentally-friendly kitchen. However, it's susceptible to scratches, finger prints and dents.
You’ll find stainless steel in commercial, modern and contemporary kitchens. When paired with darker woods, like cherry or oak, these cabinets fit with transitional and eclectic décor.
Laminates run $4,000 to $15,000. Like wood veneers, this is a cost-friendly alternative to wood. It’s a synthetic material that's adhered to particle board in both high-pressure and low-pressure procedures. High-pressure laminate is a higher quality product sold under brand names like Formica and Pionite.
It is highly durable and stands up to the wear and tear of a busy kitchen. Also, it doesn't warp or fade like some wooden alternatives. Laminate is especially at home in affordable, modern or contemporary kitchens.
Acrylics range anywhere from $5,000 to $20,000 or more depending on the base material used. Acrylic is a very hard, high-gloss finish applied as you would a varnish. It comes in various colors typically on flat panels for an ultra-modern look. Cost differences are due to the underlying material used, which can be MDF, wood, metal or others.
Cabinet design falls into two camps: framed and frameless. On average, you’ll end up spending 15% more on frameless styles. The cost of framed and frameless vary based on the wood, construction and size of your project. The most important decision when considering design is whether it will fit your existing décor. Here's a quick breakdown of each:
Framed cost $5,000 to $20,000 or more. A framed build means that the rails and stiles are visible at the front and form a flat frame that the door is attached to. They are best for homeowners seeking a traditional design.
Frameless cabinets cost $6,000 to $30,000 or more. Custom designs lead to higher-end pricing as ranges are almost always due to the quality of the materials, level of customization and size of your kitchen. They are used in contemporary and modern designs. Frameless construction relies on a heavier box to hide the frame and hang the doors.
Inset, or flush, cabinets have the same ranges as most other semi-custom and custom or $150 to $1,200 per linear foot. Expect to pay about 20% more for flush mounts than a similar traditional design with the same grade of materials. This type has a unique design where the drawers and doors, when closed, are flush with face frame openings.
Shaker cabinets cost the same as any other style or between $100 and $1,200 per linear foot. This is a style choice for the doors and drawer faces, not a material difference. The type of material you use and whether you choose stock or custom will dictate the actual prices.
A 10 foot by 10 foot kitchen runs $2,000 to $24,000, depending on the type and materials you choose. This sized room typically has 20 to 25 linear feet of cabinetry.
Cabinets for a standard 12 by 12-foot kitchen costs $2,500 to $29,000. This size is closer to the average kitchen size in US homes. The size of kitchens has doubled since the 1920s to accommodate open concepts, increased storage needs and larger and more numerous appliances.
You’ll end up spending between $1,700 to $20,000 on cupboards for a small kitchen. A small kitchen is typically 70 square feet or less. You don’t have to sacrifice style or efficiency in homes with smaller kitchens. You’ll find there are creative storage solutions in a wide range of materials and styles for all kitchen sizes.
The traditional L-shaped kitchen has two walls of counters and cabinets extending from one corner of the room and running along perpendicular walls.
Not all cabinet installations are hang-and-go projects. Here are some additional considerations to include in your plan:
Here are a few questions to help you choose the perfect professional for your project:
Stock cabinets are the lowest cost type at $100 to $300 per linear foot.
Expect to pay $13,000 to $30,000 for most high-end custom cabinets.
The cost of a bathroom vanity runs anywhere from $200 to $3,000.
Kitchen cabinets aren’t sold per square foot, just per unit or when done professionally, by the linear foot. Expect to pay anywhere from $100 to $1,200 per linear foot.
Any material works for white cabinets. There is no “best.” Choose the material that best fits with your budget and home value.
Most popular brands are available across the United States at independent dealers. Most independent cabinet installers have access to a wide range of brand names. They can help you determine which one fits your budget and design.