Flipper Zero

Flipper Zero is a portable multi-tool for pentesters and geeks in a toy-like body. It loves hacking digital stuff, such as radio protocols, access control systems, hardware and more. It's fully open-source and customizable, so you can extend it in whatever way you like.

Compatible with Arduino IDE
and PlatformIO

Based on STM32 MCU

Open Source Firmware

Multi-tool Device for Geeks

PRE-ORDER

What is Flipper Zero

Your cyber buddy

The idea of Flipper Zero is to combine all the phreaking hardware tools you'd need for hacking on the go. Flipper was inspired by pwnagotchi project, but unlike other DIY boards for hackers, Flipper is designed with the convenience of everyday usage in mind — it has a robust case, handy buttons and shape, so there are no dirty PCBs or scratchy pins. Flipper turns hacking into a game, reminding you that hacking should always be fun.

Flipper Zero is a tiny piece of hardware with a curious personality of a cyber-dolphin who really loves to hack. It can interact with digital systems in real life and grow while you are hacking. Flip any kind of access control system, RFID, radio protocol and perform hardware hacks using GPIO pins.

1.4" monochrome LCD display
128x64 px, ultra-low power
Sunlight readable

5-Button directional pad for menu navigation

Status LED

Exit/back button

Flipper Zero is completely autonomous and can be controlled from a 5-Position directional pad without additional devices, such as computers or smartphones. Common scripts and attacks are available from the menu.

For more control, you can connect to Flipper via USB. Instead of a TFT/IPS/OLED, we decided to build in a cool old-school LCD screen, which is perfectly visible in sunlight and has an ultra-low power consumption of 400nA with the backlight turned off.

GPIO pins
3.3V logic levels
(5V tolerant)

Infrared transceiver

Wrist strap hole

USB Type-C
Power and battery charging
Firmware update

MicroSD Card slot

433/868 MHz Transceiver

This is the operating range for a wide class of wireless devices and access control systems, such as garage door remotes, boom barriers, IoT sensors and remote keyless systems.

Flipper has an integrated 433MHz antenna, and a CC1101 chip, which makes it a powerful transceiver capable of up to 100 meters range.

Sub-1 GHz Range

Smart sockets & bulbs

IoT sensors & doorbells

Signal Analyzer

Flipper Zero has an integrated decoder for popular remote control algorithms: Keeloq, Came, Doorhan and others, so you can analyze an unknown radio system to figure out the underlying protocol.

It can record and store the samples of radio data to analyze later on a computer, as well as replay saved samples. Many devices, such as remotes, doorbells, sensors and radio sockets, don't use any encryption at all — in this case, Flipper can replay the signal, even if the protocol wasn't recognized.

Oh, and one more thing — Flipper uses 433 MHz to communicate with other Flippers out there, so you can make some cyber-dolphin friends :)

CC1101 is a universal transceiver designed for very low-power wireless applications. It supports various types of digital modulations such as 2-FSK, 4-FSK, GFSK and MSK, as well as OOK and flexible ASK shaping. You can perform any digital communication in your applications such as connecting to IoT devices and access control systems.

Customizable radio platform

Flipper Zero 433 MHz Sniffer Signal Analyzer

Garage doors & barriers

125kHz RFID

Low-frequency proximity cards

This type of card is widely used in old access control systems around the world. It's pretty dumb, stores only an N-byte ID and has no authentication mechanism, allowing it to be read, cloned and emulated by anyone. A 125 kHz antenna is located on the bottom of Flipper — it can read EM-4100 and HID Prox cards, save them to memory to emulate later.

You can also emulate cards by entering their IDs manually.
Moreover, Flipper owners can exchange card dumps remotely.

Flipper Zero 125 khz proximity card reader and emulator

NFC

High-frequency proximity cards

Flipper Zero has a built-in NFC module (13.56 MHz). Along with the 125kHz module, it turns Flipper into an ultimate RFID device operating in both Low Frequency (LF) and High Frequency (HF) ranges.
The NFC module supports all the major standards, such as NXP Mifare.

It works pretty much the same as the 125 kHz module, allowing you to interact with NFC-enabled devices, read, write and emulate HF tags and even clone cards using special Mifare 1K cards with a writable UID.

Bluetooth

Connect to apps

Flipper Zero has a built-in Bluetooth Low Energy module. As with other Flipper wireless features, we will be providing an open source library for adding Flipper support to community-made apps.

Full BLE support allows Flipper Zero to act as both a host and a peripheral device, allowing you to connect your Flipper to 3rd-party devices and a smartphone simultaneously.

Our mobile developers are designing official iOS and Android apps to let you unleash Flipper's potential with a larger screen and greater control.

The infrared transmitter can transmit signals to control electronics such as TVs, air conditioners, stereo systems and more.

Flipper has a built-in library of common TV vendor command sequences for power and volume control. This library is constantly updated by Flipper community users uploading new signals to Flipper’s IR Remote database.

Infrared Transmitter

Flipper Zero also has an IR receiver that can receive signals and save then to the library, so you can store any of your existing remotes to transmit commands later, and upload to the public IR Remote database to share with other Flipper users.

Infrared learning feature

Infrared Transceiver

Infrared receiver

Arduino IDE Compatible

Flipper Zero can be extended functionality by your own code written with a familiar Arduino IDE or PlatformIO software. Uploading sketches to Flipper is as easy no more complicated than with a regular Arduino board.

Your code can use all built-in Flipper hardware: the built-in display to print text and draw images, the buttons to navigate, the Radio module for Sub-1Ghz communication, the RFID module for proximity cards, the IR module for infrared communication and GPIO pins for extending the functionality with custom or DIY modules.

By the way, don't worry about filling up the onboard memory — Flipper has four times more flash storage than an Arduino Mega.

Extend with your own plugins

Flipper Zero can run your code as a plugin, storing multiple programs alongside its own firmware, unlike basic Arduino boards. Thus, any code can be run from the plugins menu without uploading it every time you need it. And don't be afraid to break something if your code freezes or crashes — the base firmware is always there.

Hand strap hole

MicroSD Card

There is lots of heavy data Flipper has to store: remotes codes, signal databases, dictionaries, image assets, logs and more. All this data can be stored on an SD card, as well as user plugins.

The SD slot will have a push-push type connector, so the card will be reliably secured inside and won't stick out.
Flipper Zero will support any FAT32 formatted microSD card to store your assets so you’ll never have to worry the memory will run out. The card is not required for Flipper Zero to operate and is not included.

External storage for apps and data

Hand strap hole

Tool for Hardware Exploration

Flipper Zero — Tool for Hardware Hacking

Hand strap hole

Flipper Zero is as a versatile tool for hardware hacking, firmware flashing, debugging and fuzzing. It can be connected to any piece of hardware using GPIO to control it with buttons, run your own code and print debug messages to the LCD display. It can also be used as a regular USB to UART/SPI/I2C/etc adapter.

SPI/UART/I2C to USB converter

Communicate with any hardware from your desktop application.

Firmware flashing tool

Flash any kind of SPI memory, such as EEPROM.

Fuzzing tool

Test any protocols and signals.

Built-in 5V and 3.3V power pins. Control from built-in buttons and display, no PC required.

Completely Autonomous

Bad USB Mode

Flipper Zero can emulate USB slave devices and connect to a computer like a regular input device, such as an HID keyboard or an Ethernet adapter, just like USB Ducky. You can write your own payload for the keyboard to type any key sequence, and run USB fuzzing attacks on a target device.

Acting as a USB slave device

Hand strap hole

Flipper Zero has a built-in 1-Wire connector to read iButton (aka DS1990A, Touch Memory or Dallas key) contact keys. This old technology is still widely used around the world. It uses the 1-Wire protocol that doesn't have any authentication. Flipper can easily read these keys, store IDs to the memory, write IDs to blank keys and emulate the key itself.

Flipper Zero has a unique contact pad design on the corner — its shape works as a reader and a probe to connect to iButton sockets at the same time. This mode is also handy for silently intercepting the 1-Wire data line.

iButton