Sewer Line Installation Cost
Installation for a new main sewer line costs $3,019 on average, with a typical range of $1,284 and $4,833. Once the plumber places the line, you may pay an additional $500 to $20,000 for hookup to the city sewer. Cities set prices depending on local water resources and the current setup on the street.
Sewer mains are extremely important and require coordination with your local waste treatment authority. As a rule, you’ll need to pay to have the line installed on your property. The city may cover a portion of the costs to connect your home's pipes to the street.
Since sewer management is vital for your health and home value, it’s important to hire a licensed plumber to do the work.
On This Page:
Sewer Main And Line Installation Cost Calculator
| National Average | $3,019 |
| Typical Range | $1,284 - $4,833 |
| Low End - High End | $250 - $8,450 |
Want the most accurate estimates for your project?
Request Quotes
We are still gathering data for this location.
Want the most accurate estimates for your project?
Request QuotesCost to Install New Main Sewer Line
Installing a main sewer line costs an average of about $2,900. Here are some factors that might come into play with the cost to install a sewer line.
Task | Total Cost Including Labor |
|---|---|
Sewer Line Per Foot | $50-$250 |
Trenching | $800 |
Backflow Preventer | $150-$1,150 |
Sewer Cleanout | $2,000 |
Hookup | $500-$20,000 |
Sewer Line Cost Per Foot
The average to install a sewer line ranges from $50 to $250 per linear foot. New pipes cost $3 to $20 per foot, with about $30 to $247 per foot for labor expenses. Trenching may or may not be included in this charge.
Trenching Costs
The cost to dig a trench runs about $800 for 100 linear feet. The total expense depends on the length and depth of the trenches needed. This price usually does not include removing landscaping or hardscaping before digging.
Backflow Preventer
Installing a backflow preventer costs $125 to $900, plus $25 to $250 for labor. A backflow preventer keeps waste flowing toward the city sewer line, away from the home.
Cost to Install a Sewer Cleanout
The price to install a sewer cleanout averages $2,000. This estimate typically includes pipes and materials, equipment, tools and labor. This is an access point that plumbers use to remove clogs in the line.
Sewer Hookup Cost for a Septic System
Septic system installation costs $5,700 on average, ranging from $3,000 to $8,500. Generally, this project is more expensive than the typical $2,900 for a new sewer system installation.
Get Estimates From a Sewer Line Installer
City Sewer Connection Cost
Hookup to the city water and sewer line runs from $500 to $20,000, depending on local regulations. It is up to the city to decide how much of the work they will subsidize. Some regions charge higher rates based on supply and infrastructure problems. Others cost less to make new construction more affordable. Contact a local sewer pro to learn the rules for your area.
Who Foots the Fee to Tie Into the Public Sewer?
Typically, property owners must pay for improvements on their land. For new construction, this expense may be wrapped into the cost of the home. If you're replacing a sewer line in an existing home, you will usually pay directly for this upgrade.
Average Cost to Hook Up to City Water & Sewer
Although the price of $500 to $20,000 to connect to the city usually includes water and sewer hookup, it often does not include installation for either line. Water main installation costs $1,500 on average. In many cases, your plumber can do both projects for you.
Contact a Pro To Connect Your Sewer Main to the City
Housing Type
Who pays the cost of sewer line installation depends on the type of home you have. Property owners can usually expect these arrangements:
- Single-family: Covered by homeowner
- Twin home: Negotiated by owners
- Duplex: Covered by property owner
- Townhome or Condo: Covered by HOA, possibly including an increase in fees
Check with your city to find out more information concerning your neighborhood or housing development.
Distance to Connector Line
Laying a new line costs $50 to $250 per foot. The distance between your home and the connector line affects this price. The further away it is, the more pipe that will need to be installed, which increases material and labor costs.
City Permits & Regulations
Permits to connect to the city sewer line range from $400 to $1,600, averaging about $1,000. The price depends on the regulations set by the area’s sewer authority. You must get them in advance of the project. If your city isn't in control of your installation, ask a plumber what you need to do. Some pros can obtain the permits for you, but you may need to do it yourself.
Obstacles
Anything that might get in the way of digging will increase the total expense. Consider these jobs commonly related to sewer line installation:
- Cost to install landscaping: $3,300
- Average to remove a tree: $675
- Price to repair driveway: $1,600
- Expense to resurface patio: $1,400
Before you commit to these property repairs, ask your plumber if there’s a way they can avoid it. If it’s unavoidable, you may need to hire a landscaping or hardscaping professional to complete these tasks.
Switching from a Septic to Sewer Cost
Converting your home from a septic system to the city sewer could cost as much as $6,000 or more. In addition to the price of laying and connecting the line, you must also pay to decommission your septic tank. If your project calls for trenching under the foundation or installing new pipes inside the home, you can expect a higher total.
Permits | $1,000 |
Decommission Septic Tank | $500 to $1,000 |
Install New Sewer Line | $2,900 |
Trench Under Foundation | $150-$200 per foot |
New Pipes Inside Home | $1,050 |
Decommissioning a Septic Tank
Ending use of your septic tank costs $500 to $1,000 and must be done properly to avoid property damage. Most pros recommend flushing out the tank and filling it with a stable material like sand. You can remove the tank, but most homeowners prefer to minimize disruption of the landscaping.
Under-Slab Trenching
Trenching under your foundation ranges from $150 to $200 per foot. You may need this step if your existing pipes are located under the house. Unlike digging a simple trench elsewhere on your property, this task requires extra care to avoid damaging your foundation.
Install New Plumbing Lines
The price to install new plumbing lines averages $1,050. Switching from septic to sewer may force you to reroute or place new pipes to connect to the street.
Get a Quote From a Plumbing Professional
Sewer Line Replacement
If you're replacing an old sewer line, you’ll pay:
- $50 to $250 per foot for trenching
- $60 to $200 per foot for a trenchless line replacement
The total cost may run $7,000 to $25,000. Digging out old pipe and replacing it can increase expenses. The existing sewer line might be below your gas line, which is often more expensive to redo.
With trenchless methods, a plumber inserts a smaller pipe within the existing plumbing. Many homeowners choose this method to avoid a full excavation, but it’s not appropriate for all homes. Ask a pro about your options.
DIY Installation vs. Hiring a Pro
In almost all cases, you’ll need to hire a professional plumber for sewer line installation. It’s a complicated project that could have disastrous consequences for you and your neighbors if done wrong. In some cases, homeowners may not be able to get permits for the work without proof that they are working with a licensed professional. To request a quote, find a plumber near you.
Do I Hire a Plumber for Sanitary Sewer Construction & Hookup?
In most cases, you’ll need to hire a plumber to install and connect your new sewer line. If the work also involves landscaping or excavation, the plumber may offer these services or recommend you hire another pro.
How Do I Calculate Sewer Piping Needed to Run from House to Street?
To estimate how many feet of pipes you’ll need, add the depth of the city main to the distance between the home and the main. This does not include extra feet needed to bypass obstacles such as tree roots or utility lines. City sewer lines tend to run lower than other plumbing or utility lines to minimize the likelihood of backflow, so this number may be higher than you expect.
What’s the Estimated Cost for a Sewer RV Hookup Installation?
The cost to hire a plumber runs $45 to $200 per hour plus materials. The price to install a sewer hookup for an RV depends on the project’s complication. If you are connecting into an existing line on the property, you’ll pay less than if you must install a new line.
What’s the Average Cost of an Overhead Sewer?
The price of an overhead sewer ranges from $8,000 to $10,000. This type uses pipes installed above ground to minimize backflow into a basement.
