Cost to Get a Building Permit
The national average cost of a building permit is roughly $1,164. Homeowners spend anywhere between $404 and $1,944. Depending on what city you live in, the cost may be as high as $7,500, whereas small towns may only charge $100 for one.
If you intend to take on a building project or remodel a home, permits are serious requirements upheld by state and local authorities to ensure compliance with building code safety. You usually need a building permit for structural additions, renovations and even electrical or plumbing projects on your home.
On This Page:
- Building Permit Cost Calculator
- Building Permit Costs
- Garage Conversion
- Electrical
- Roofing
- Fence
- Plumbing
- HVAC
- Construction
- Bathroom
- Deck
- Shed
- Pergola
- Building Inspection Fees
- Basement
- Window
- Demolition
- Average Cost of Building Permits
- Residential vs. Commercial Building Permit Cost
- What is a Building Permit?
- Why Are Permits Needed?
- When is a Permit Needed?
- New Construction
- Room Additions or Conversions
- Major Renovations
- Structural Changes
- Electrical, Plumbing and Mechanical Work
- How to Get a Permit
- What is a Permit Service?
- FAQ
Type of Permit | Average Cost |
---|---|
Building a House | $1,200-$2,000 |
Garage Conversion | $1,200-$1,500 |
Electrical | $10-$500 |
Roofing | $225-$500 |
Fence | $60 |
Plumbing | $50-$500 |
HVAC | $1,200-$2,000 |
Construction | $1,200-$2,000 |
Bathroom | $1,200-$2,000 |
Deck | $0-$500* |
Shed | $0-$2,000* |
Pergola | $0-$2,000* |
Building Inspection | $200-$500 |
Basement | $1,200-$2,000 |
Window | $260-$600 |
Demolition | $200 |
*$0 price ranges mean that a certain project may not require a permit depending on the complexity of the work.
Building permits can be tricky to price because it depends entirely on which types you need for your project. Below is a helpful table of various permits and the average costs you can expect for each one. Learn more in the sections below about the details of each permit including when or in what regions it might be required
Garage Conversion Permit Cost
A permit for a garage conversion costs between $1,200 and $1,500. In most cities, this type of project is considered an extension of the home and will require an overall building permit to execute work. The price is higher due to building aspects like wiring, HVAC installation, outlets, air ducts and vents.
Electrical Permit Cost
Gaining this type of permit costs anywhere from $10 to $500 depending on the amount and complexities of your project's electrical needs. The cost of electrical work varies according to:
- the total number of circuits
- amps
- sockets
- outlets installed
Individually, these components are affordable, but when dealing with large quantities and higher voltages, the price can skyrocket, which increases your permit costs. Tiny repairs (like replacing light fixtures or fixing a ceiling light) do not need a permit, whereas any projects that require wiring installation or rewiring to a new placement do require one.
Roofing Permit Cost
If you're planning to re-roof a home or structure, then you can expect to pay between $225 and $500 for a permit. Your initial building permit covers roofing when remodeling a home, so you can save money if you fold other projects into one license. However, a roofing permit is a separate requirement for one-off projects. Typically, it covers you up to the first 1,000 square feet, but you may need to pay more for any additional square feet after that. When hiring a contractor, they should be able to include the cost of a roof permit into your final bill.
Fence Permit Cost
You can expect to pay around $60 for a fence permit. The need for a fence permit depends entirely on where you live. For instance, if you live in an urban city with lots of people, then chances are you'll need a fence permit. A good rule of thumb to keep in mind is that fences under 6 feet tall typically do not require a permit. That being said, always consult with your neighbors to make sure they're on board with your design and confirm with a contractor that they can provide you with a permit in the final cost of your fencing project.
Plumbing Permit Cost
The average cost of a permit for these projects is between $50 and $500. Plumbing operates in a similar fashion to electrical work, meaning that its complexities have comparable pricing and permit models. Anything that needs the following will require approval:
- repiping
- drain replacement
- sewer replacement
- new plumbing installation
- new water heater installation
Plus, licenses for each plumbing project costs something different. A good way around these fees is to plan for a complete remodel of your home or bathroom. That way, you can pull one permit to cover all aspects of the job, rather than bits and pieces.
HVAC Permit Costs
Since these projects involve installing air ducts and vents throughout a home, they typically incur permit costs between $1,200 and $2,000. Altogether, they fall under a general building permit requirement, and a contractor should be able to include this fee into the total price of installing a heating and cooling system. Even if you're replacing a broken appliance, you need a permit to pass a final inspection and ensure functionality by a contractor, HOA, landlord, etc.
Construction Permit Costs
These permits cost anywhere from $1,200 to $2,000 since they involve many elements that warrant structural changes to an entire home or project. For example, these projects may share the same cost as a general building permit:
- removing or building interior walls
- pouring a concrete basement
- building a patio
- remodeling a kitchen
- repairing a ceiling relates to construction.
Be sure to check with a contractor, architect, or engineer when mapping out the final cost of building a house to ensure that you're meeting all the right permit requirements. They should be able to include an estimate for one into your final price.
Bathroom Permit Costs
Doing repairs to a bathroom or adding one to your home requires a permit, which costs between $1,200 and $2,000. You’ll need a general building permit to execute each of these tasks to pass inspection:
- plumbing
- electrical
- construction
- HVAC
A contractor should be able to provide you with one in the final cost to remodel a bathroom.
Deck Permit Cost
For existing decks to a home or outdoor space, a permit isn't required. However, the final cost to build a new deck may include a permit fee of up to $500. The good thing about decks is that they usually don't require any special building components, such as wiring, roofs, outlets, etc.
In some cases, you may have to hire a land surveyor to assess where your deck can extend to. Also, if you plan to build additional structures on your property, it may be beneficial to rezone your home to explore your options. In any case, your contractor should be able to provide you with the necessary permits for your deck project.
Shed Permit Cost
Sheds that involve livable elements, like electricity, plumbing, outlets, etc., will require a building permit that could cost up to $2,000. The same rule applies for a shed that covers a large surface area and challenges zoning restrictions.
Depending on the square footage of your shed, you may not need a permit to build one. Installing a shed that's 6 foot by 8 foot or 8 foot by 8 foot generally falls under most compliances and doesn't warrant a permit. In fact, you can even purchase pre-made sheds from your local hardware store that are a great space for extra storage with minimal upkeep.
Each county has different requirements, so be sure to check with your area before starting and working that total into the final cost of your shed project.
Pergola Permit Cost
Most pergolas do not require a permit for installation because they are not an entirely outdoor building. Generally, they do not have a covered roof, posts supporting the structure do not penetrate deep into the ground, and they usually have no complex lighting systems or electrical wiring.
With that in mind, if you plan to involve any of those aspects into your project, then you may need a general building permit that costs anywhere from $1,200 to $2,000. The cost to build a pergola can increase quickly on account of its design, so consider purchasing a pre-made pergola kit that removes the need for a permit and is easy to set up if you're concerned about approval factors.
Building Inspection Fees
Once your projects are complete, you may need to hire a building inspector to approve the work or offer an appraisal on your home. On average, homeowners spend just over $300 for this service, with a typical range between $200 and $500.
Make sure to do some research and get different quotes from inspectors. Also, keep in mind that factors such as home size, the complexities of your home, and overall inspection time play a significant role in determining a final price. Something else to consider is that if you obtain a building permit for a project, it should come with a free inspection process when it's complete.
Basement Permit Cost
You can expect to pay between $1,200 and $2,000 for a permit within the final cost for a basement remodel. Your basement is inside your home and typically involves several livable components, such as electricity, plumbing, heating and cooling, and may need additional construction work. For this, you'll have to obtain a general building permit to ensure that all work is compliant and up to code.
Window Permit Cost
To repair or replace existing windows, most cities and counties require you to have a permit that costs anywhere from $200 to $600. The reasons for a window permit are that your new ones must meet certain standards to ensure safety and energy codes.
For instance, there are standards for egress, tempered glass, smoke detection, carbon dioxide detection, and energy efficiency. The good news is that permits for windows can be bought over-the-counter on a per window basis. A permit for one window installation may cost $200, wheres 2 to 5 windows may cost $400. Make sure to check with your local authorities to map out pricing before starting your project.
Demolition Permit Cost
When hiring a demolition service, an average $200 cost of a permit is usually within the final estimate. On the other hand, larger cities may charge much higher prices for demolition, so be sure to check with your local authorities to nail down an exact price. Even when working with a contractor, they should be able to include the cost of demolition and permit for the cleanup of your project.
Average Cost of Building Permits
Aside from the national average price of $1,200 for a building permit, several states operate under their own guidelines when it comes to new construction or remodeling projects. Below are standard procedures and prices for California, Oregon, and Idaho:
California Building Permit Costs
Constructing a new building and most remodeling work in the state requires a permit. Overall, there isn't a statewide price point to expect for building permits because jurisdiction is typically left up to each county to decide for their residents. However, you can expect your total permit fees to account for a range between 6% to 18% of your project's total budget.
Oregon Building Permit Costs
Luckily, this state offers many loose restrictions on building permits and only charges fees according to the total cost of your project. For example, if you have a bathroom remodel that's going to cost $10,000, your expected permit fees are around $300 or 3%. For additional permits regarding plumbing, electrical, and mechanical work, fees are subject to the total number or type of installations. Each county offers their own pricing models for these expenses, so be sure to check with your local authorities for an accurate quote.
Idaho Building Permit Costs
Much like Oregon, Idaho offers a valuation price model to calculate your total building permit fees for a project. For instance, on a $10,000 valuation on a room addition, you can expect permit fees just over $250 or 2.5%. Other counties throughout the state operate in the same fashion, although you may incur additional inspection fees that aren't necessarily a part of the permit package. General inspection fees are just under $50 per hour.
Don't Let Permits Slow Down Your Project.
Residential vs. Commercial Building Permit Cost
These two project types are similar when it comes to obtaining permits, but commercial buildings tend to be more expensive.
Commercial Buildings:
- Represent businesses
- Requirements and approval processes are more strict
- Permit and inspection fees are demanding and costly
Residential Buildings:
- Represent livings spaces for families, couples, individuals
- Requirements and approval process are on a case-by-case basis, often less strict
- Permit and inspection fees depend on county regulations, location, and type of work completed
Commercial buildings still must apply for the same building permit as a residential space would for any kind of new construction or remodel, although an additional valuation applies to the total cost along with the permit application fee. In most cases, anywhere from 1% to 5% of the contract's value in addition to the building permit applies. Also, commercial buildings are subject to demanding inspection fees to comply with local and state regulations, whereas residential properties are only subject to county rates that are often a part of a building permit's package. For accurate prices for these two property types, check with your local authorities before starting construction.
What is a Building Permit?
A building permit is an official document required to begin legally sanctioned construction or renovation on a property. Every jurisdiction - including states, counties, cities or towns - has different requirements for issuing permits, along with different building codes and fees associated with the permits. Essentially, the Board of Permits and Inspections or Building and Zoning Board knows what the homeowner permit is for once a plan is submitted by a builder. Once fees are paid, permits are issued. Later, the agency will have the construction inspected to make sure it passes code.
Why Are Permits Needed?
The rationale behind building permits includes public health and safety, uniformity of construction quality, and easier property valuation. The most crucial of these is health and safety. Buildings that are constructed, wired or plumbed improperly can lead to dangerous conditions that would affect more people than just the owner or occupants of a property. These conditions could include risk of fire from poor wiring, disease from poor plumbing and bodily harm from poor structural integrity.
Not sure if you need a Permit? Talk to a Local Permit Professional.
When is a Permit Needed?
The answer to this question depends on local regulations regarding construction and renovation. In general, urban and suburban areas require more permits than rural areas; however, it is always better to be safe than sorry.
The following are circumstances that frequently require building permits:
New Construction
Constructing or building a new home or other structure generally requires a permit. This category includes structures like guest houses, garages, storage buildings and gazebos. Many areas also require a special building permit for fences and privacy screens if they are set in concrete.
Room Additions or Conversion
This includes adding new rooms or a sunroom to a home, but it also encompasses the construction of patios, porches and decks as well, depending on local codes. Enclosing a garage may be considered an addition because it would increase the heated space of the home.
Major Renovations
This can include everything from restoring an older home to a dated kitchen renovation or garage remodel to a dreary bathroom. Many new homeowners who have purchased a fixer-upper get in trouble here by not applying for permits to renovate their vintage home or by deviating too substantially from submitted renovation plans.
Structural Changes
Structural changes generally involve alterations to the bones of the structure, including the addition or removal of walls or finishing an attic or basement space. Demolition is another example. These permits can be especially important when changing load-bearing portions of the structure because if these are altered in an unsatisfactory way, the structure could be condemned as unsafe.
Electrical, Plumbing and Mechanical Work
These three areas encompass an enormous amount of potential construction or renovation work and may require separate forms in addition to the actual building permit. Some examples of this type of work include installing outdoor lighting, adding a hot tub or replacing garage doors. Depending on the area, some of these projects may require a permit. In other locations, they may not. The installation of a sophisticated home automation system may also require a permit.
How to Get a Permit
The homeowner or contractor must complete the appropriate forms and return them with fees to the local body that governs building permits depending on the property's location. The permit may be immediately approved, require changes or undergo additional review. This can be a complex process. Construction should not begin until after final approval is granted and the building permits are issued.
Looking for a Permit Service? HomeAdvisor Can Help You Find the Best Nearby Permit Acquisition Services.
What is a Permit Service?
A permit service is a company that manages the building permit application process on behalf of a homeowner or contractor. On average, you can expect to pay between $35 to $70 per hour when hiring a building permit service or expeditor permit service. Plus, you may have to pay additional fees for travel, copies, mileage, and extra time if the process is especially difficult. Here's a rundown of the services they offer:
- Take care of filling out paperwork on your behalf
- Keep track of fees and inspections to avoid extra or unnecessary costs
- Superior knowledge of permit requirements to streamline the process
- Allows you to focus on the enjoyable parts of construction or renovation.
A permit service can make certain that every form is completed properly and that every permit is exactly as it should be, preventing difficulty further along in the process. Permit services help homeowners avoid fines, stop-work orders or legal action regarding their projects. Having one reduces the potential for bad inspections or inadvertent permit violations. Overall, permit services take some of the stress and frustration out of the building equation.
The actual permit costs depends on the location of the property and the type of work that will be performed there. For many homeowners, the process of applying for a permit may seem daunting, but it cannot be avoided without risking fines or worse. These services are a great alternative for homeowners who'd rather not deal with all the paperwork themselves.
FAQ
How Much Do Permits Cost for Building?
The final cost of building permits depends on the type of project and its complexities. However, you can expect to pay anywhere from $1,200 to $2,000 in permit fees when executing building projects at home. For instance, a room addition permit may cost $1,500, whereas renovating a bathroom may cost $1,200. Check with your local authorities to get accurate estimates and plan ahead.
What Requires a Building Permit?
Projects that require a building permit include:
- Any new construction to your home
- Room additions or conversions
- Major renovations to your home or outdoor living spaces
- Structural changes to your home or outdoor living spaces
- Any electrical, plumbing, or mechanical work done to your home or outdoor living spaces
How Long Does it Take to Get a Building Permit?
After submitting your application, it usually takes two weeks for residential properties to receive a building permit, whereas commercial properties may take up to four weeks for approval. Some permits for smaller jobs may be received the same day, but you must check with your local authorities to see what documentation is needed and what jobs qualify for quick turnarounds.
What Happens if You Build Without a Permit?
If you're caught building without a permit, you may be forced to shut down your project and pay hefty fines in order to gain compliance. In some cases, violations to permit licensure may result in costs that match or exceed the project total itself, so it's always a good idea to obtain a permit before starting any work on a project.
Can a Homeowner Pull their Own Permits?
Yes, a homeowner can pull their own permits by making an inquiry to their local agencies and providing them with their address and personal information. This is a handy resource for homeowners or contractors who have lost their permit and need additional copies.
What is an Owner-Builder Permit? Do I Need One?
An owner-builder permit is a type of permit that makes you personally responsible for the work being done on your project. You should get this type of approval if you plan to do all of the construction yourself and serve as your own contractor.
Overall, you save money by not outsourcing this job to someone else who may charge additional fees to hire sub-contractors and day laborers. However, the major downside to this type of permit is that you are subject to great financial risk in the event deadlines aren't meant on time or if a worker you hire gets hurt on the job.