Window Installation Costs
The average national cost of window installation is $5,173, with most homeowners spending between $2,642 and $7,713. A single unit runs anywhere from $300 to $1,200 for standard sizes while custom work and bay styles can quickly hit $2,000 or more. In addition to the material price, labor will run $150 to $800 per window or an average of $40 per hour, depending on the difficulty of the project.They can bring light and warmth, provide views, beautify inside and out, and add tremendous value to your home. Quality units are an important investment. The price will depend on the type, dimensions, materials used, the complexity of the installation, and of course, the number needed.
On This Page:
House Window Prices
Individual prices range from $85 to $2,500 or more with installation adding an additional $150 to $800. The price depends on several factors including accessibility and the total number in a project.Material type is the largest cost factor. On the lower end of the spectrum is a vinyl, single-hung, replacement unit. On the highest end of the price spectrum is a solid mahogany-framed, triple-pane, low-E picture style.
Window Costs for New Construction
New construction windows run anywhere from $85 to $1,400. Designed for new construction and during remodels where the stud-framing is exposed, they attach directly to the studs via a flange called a nail fin frame.They're a poor choice for existing homes. Materials are 10% to 15% cheaper than retrofit styles. However, they run 50% to 100% more to install due to extensive construction needs.
Window Prices by Size
There are hundreds of common sizes available, but brand, design and material play a more significant role in pricing. Unless you purchase a very large, pre-hung type such as a bay or picture style, size only impacts the material price, not installation.They tend toward different dimensions depending on where they're needed. Major manufacturers can customize them to any dimensions but be aware that you may pay more for odd sizes.
- Living rooms typically have larger picture windows hung in multiples ranging from 3x4 feet to 6x6.
- Standard bathroom styles are quite a bit smaller, ranging from 2x1.5 feet to 2x3 feet.
Replacement Window Prices
Replacements run $200 to $1,300 depending on size, installation requirements and material. Specialty types, such as glass block and large picture styles, can run upwards of $2,500 or more. Replacing existing windows costs less than cutting walls for new ones.Unlike new construction, replacement or retrofit styles have no nail fin frame. They are designed to fit directly into the existing hole without requiring removal of any siding or trim. This less invasive method keeps added costs, like wall or trim repair, out of the equation.
Full Frame vs. Inserts or Retrofits
Full frame windows are about 10% to 15% more than a retrofit style. You'll also need to add an additional $50 to $100 per unit for installation prices.- Retrofit, also called inserts, use the existing frame and trim for a quicker job.
- Full-frame types require removing the old frame and putting in a new frame and trim. New trim requires staining after the job is finished to match your current trim.
Get Estimates from a Window Pro
Window Installation Price Comparison by Type
The two main factors in pricing are the design and the materials used. Designs range from simple single-hung and fixed varieties to the more practical sliding and double-hung types. Most types can come in any materials, which we discuss in more detail below.| Type | Window-Only Cost | Installed Cost |
|---|---|---|
| Double-Hung | $150 to $650 | $350-$850 |
| Single-Hung | $100 to $400 | $175-$600 |
| Fixed & Picture | $65 to $700 | $150-$1,200 |
| Casement | $150 to $1,000 | $300-$1,900 |
| Sliding | $150 to $800 | $250-$1,300 |
| Custom | varies | $500-$5,000+ |
| Basement | $50 to $650 | $250-$1,000 |
| Basement Egress | $650 to $2,500 | $2,500-$5,000+ |
| Bay | $600 to $2,500 | $1,500-$7,000 |
| Bow | $1000 to $4,500 | $2,000-$10,000 |
Double-Hung Window Prices
Double-hung sash types range from $150 to $650. This design allows both the bottom and top sashes to move up and down. Some higher-end models also allow the sashes to swing inward for easy cleaning.Single-Hung
A single-hung sash window runs $100 to $400. Single-hung means the top sash is fixed in place and only the bottom sash moves up or down.Fixed or Picture
Fixed or picture windows range anywhere from $65 to $700 depending on size. Fixed types do not open with only one pane of glass.Casement Window Estimates
Casement types run anywhere from $150 to $1,000 depending on material type. Vinyl styles are far less expensive than wood. They open from the left or right with a hand crank, allowing a full opening for maximum ventilation or egress.Sliding
Sliding sash varieties commonly range from $150 to $800. These work like a single- or double-hung type but only move horizontal rather than vertical. They come in styles allowing one or both sides of the unit to move.Custom Windows
They run from $500 up to $5,000 or more. Your contractor orders custom windows directly from the manufacturer in custom sizes to meet your specific needs. Contractors take care of all measurements, ordering and installation, though you can order custom sizes for DIYing.Basement Window Installation
Basement windows range from $50 to $650. These alone are some of the cheapest available at $60 and up with labor making up the rest of the price. Though it's tempting to make this a DIY project, unwanted water in the walls from poor installations can end up costing far more than a professional would have.Egress Windows
Egress windows cost anywhere from $650 to $2,500. Placing an egress type in a basement comes with numerous challenges raising the total price to $2,500 to $5,000 on average. Egress styles allow an additional escape route in case of a fire or natural disaster. These are most commonly required by code for basements bedrooms.Bay & Bow
Bay windows cost $600 to $2,500 while bow styles average $1,000 more. Both units protrude outward from the wall. Both require framing, flashing and roofing above the extrusions.- Bay - $600 to $2,500 - 3, generally a large picture one sandwiched between two smaller sash or casement styles.
- Bow - $1,000 to $4,500 - 5 or more individual units creating more of a curved effect.
Consult with a Pro when buying a window
Window Frame Material Price Estimator
The material you choose affects price as much as the style. Vinyl is the most common type, closely followed by wood. Other less popular and common types include composite, aluminum and fiberglass.Vinyl falls at the lowest end of the price scale with wood at the top. Which one will you choose? Compare vinyl vs. wood windows to find which suits your needs best.
| Vinyl | $250-$600 |
| Wood | $600-$2,000 |
| Fiberglass | $600-$900 |
| Aluminum | $400-$1,200 |
| Composite | $300-$1,100 |
Vinyl Windows Costs
Vinyl cost $250 to $600 and require little or no maintenance. They're also extremely durable; changes in humidity don't cause them to swell or shrink. Most manufacturers stand behind their products with strong warranties. Their greatest drawback is that they're not as sturdy or attractive as wood.Wood Windows
Wood frames cost $1,200 on average and require regular. Fail to repaint and finish wood and they become susceptible to the elements.The work and money can be worth it for the classic, authentic, architectural appeal of wood. That's why some historical neighborhoods have covenants requiring wood framing.
Fiberglass
Costs about 10% to 20% more than vinyl or an average of $600 each, including installation. Fiberglass is more durable than vinyl with similar insulation properties. Because of the price difference, it is less common.Aluminum or Metal
Aluminum can range anywhere from $400 to $1,200 or more for large or high-end varieties. Though aluminum is still available, it's far less popular than other types since its tough to paint and doesn't insulate well for a higher initial price.Composite
Composite windows cost between $300 and $1,100. This style attempts to capture the best of both worlds by mixing PVC polymers with wood fiber to create a strong, attractive frame.Get a Call from a Window Installation Pro
Home Window Pricing by Glass Pane
New windows can save you considerable money on your utility bills and make your home more comfortable. Windows are rated by the U-factor. The lower the U-factor, the more energy efficient and higher the initial price.Experts say double-pane windows can save up to 24% in cold climates during the winter and up to 18% in hot climates during the summer. You'll pay more for double-pane types, but they will pay for themselves over time. Triple-panes run 15% to 40% more than a double-pane type but reduces heat loss even further.
Impact Window Cost Calculator
Impact-resistant varieties, also known as hurricane or inner-membrane windows, run between $250 to $750 for a single-hung, or about $25 to $55 per square foot plus an additional $30 to $50 per hour for labor. A layer of polyvinyl butyral sandwiched between two layers of impact-resistant or tempered glass creates this commonly used coastal type.Insulated, Energy-Efficient Window Costs
Thermally-insulated, energy-efficient types run anywhere from $120 to $1,200 or more. Labor adds $200 to $800 each. Usually, the higher the price, the more energy-efficient. Depending on your climate, the higher initial investment is offset by long-term savings.Replacing windows for better thermal insulation with Energy Star rated varieties can not only save on your heating bill but may also qualify for a local or federal rebate.
- They account for 25% to 30% of your homes heat loss.
- Low-e coatings add 10% to 15% to the cost but reduces infrared heat in the summer, lowering your air conditioning bill.
- Vinyl, wood and fiberglass are much better insulators than aluminum.
Any frame material type or design can include high-efficiency glass and Low-e coatings. Talk with your contractor to find out which type is best suited for your climate.
Get a quote from a Pro today
Average Labor Cost to Install New Windows
Labor runs $30 to $50 per hour. Most contractors bid at a flat rate with labor included but estimate 1.5 hours for each basic project. Complex configurations, custom work and old homes might require up to 6 hours each.Cost to Add Windows by Amount
| Project | Average | Most Spent Between |
|---|---|---|
| Less than 5 | $2,200 | $1,250-$3,200 |
| Between 5 - 10 | $4,900 | $3,350-$6,500 |
| More than 10 | $14,500 | $8,500-$20,600 |
Installation estimates include the price of materials, labor and overhead expenses. Because of overhead expenses like delivery time, gas and tools, professionals will charge less per window if you do several at the same time.
If you're thinking about only replacing a couple of windows, it might make sense for you to talk to your pro about the cost of putting in multiple units at one time. It may save you money in the long run.
Cost to Install Vinyl Windows vs. Wood or Aluminum
There is little price difference between doing vinyl, wood or aluminum. The construction processes are very similar and most go in at about the same rate. Labor for each is going to average $40 per hour. The price differences are mostly due to the material type.- Vinyl - $250 to $600 - among the most popular and cheapest available.
- Wood - $600 to $2,000 - extremely popular but among the most expensive varieties.
Price to Put in Large Units or Window Walls
Window walls range from $700 to $1,600 per linear foot for the materials and installation. These are excellent additions to highlight views and scenery but require the right structural supports.Second or Third Floor Window Installation Cost Calculator
Be aware that units above the first floor may be more expensive because of access issues. Second floor and above requires additional equipment such as scaffolding, ladders and safety harnesses. Not only do equipment costs increase the price, but it also increases the duration of the project.Other Pricing Factors
- Custom security bars costs $1,000 on average. This is an option you can discuss with your installation contractor or another security firm.
- Post-installation window tinting costs $600 on average. It can improve the energy efficiency of your home and provide privacy.
Hire a Pro To Install Your windows
Average Cost to Install a Window in an Existing Wall
While you can expect to spend anywhere from $1,000 to $5,000+ per window, no two projects are the same. This type of work requires a combination of framing, siding, finishing work and sometimes electrical and plumbing rerouting.Factors that affect new installations in existing walls:
- Rerouting electrical pricing runs $150 to $500.
- Framing costs $1,000 to $2,500.
- Insulation installation costs $450 to $3,000.
- Trim repair costs range from $300 to $1,000.
- Siding repair pricing runs $300 to $1,100.
- Drywall installation costs $1.50 per square foot.
Changing a Door to a Window Cost
Converting a door into a window ranges from $1,000 to $3,000. You will need to consider the price of materials, framing, insulation and drywall.Remove & Move During a Remodel
Removing a window and moving it during a remodel is going to vary considerably in price from project to project. The best way to determine the price of removing and moving is to get multiple quotes from local contractors.Exterior Siding
When cutting a new hole in the wall, siding repair costs $300 to $1,100. This includes adding new flashing and making sure the exterior wall meshes seamlessly with the new opening. The type of siding you have can affect the price.Cost of Pella vs. Andersen Windows Installed
Andersen and Pella windows range from $250 to $1,800 with an additional $100 to $500 each. These are done by professionals in the same fashion as any other types. However, warranties are only issued when Pella or Andersen authorized dealers perform the installation.Both brands offer lifetime limited warranties on their products and authorized services.
| Wood | |
| Architect Series 850 | $850-$1,500 |
| Architect Series Reserve | $1,000-$1,800 |
| Designer Series 750 | $650-$1,100 |
| 450 Series/ProLine | $170-$350 |
| Fiberglass | |
| Impervia | $250-$600 |
| Vinyl | |
| 350 Series | $150-$350 |
| 250 Series | $150-$300 |
| Encompass by Pella | $100-$300 |
| Wood | |
| Architectural Collection E-Series | $900-$1,400 |
| Architectural Collection A-Series(wood/fibrex composite) | $1,000-$1,650 |
| 400 Series | $400-$800 |
| 200 Series | $250-$550 |
| Fibrex* | |
| 100 Series | $200-$300 |
| Renewal by Andersen | $900-$1,750 |
Get an Estimate from a Window Contractor
What's Best for South-Facing Windows?
The best type for south facing depends heavily on your climate. Someone in the North may want large, triple-panes to let as much natural heat in from the sun as possible. Those in a southern, desert environment may want smaller, low-e-coated, high-efficiency types to keep as much heat out as possible.What are the Best Options for Cheap Window Installation?
The best option for cheap installations is to bundle your projects together. See if a neighbor or friend is looking to renovate to get lower bids. Be wary of $300 or less per window bids as they could be a scam, or a recipe for shoddy workmanship.What is the Cost of Adding a Window to a Brick House?
Adding a window to a brick house will be on the high end of installation costs. It can run anywhere from $2,000 up to $10,000 depending on size, accessibility, age of the home, and the type of framing and glass materials you use.Can I DIY Add a New Window to my House?
Though many places allow you to DIY windows in your home, it's not a good idea. Since they provide an excellent place for water to get into your home's walls, floors and basement, a DIY installation can end up costing you more than a professional. Check with your local code enforcement agency to see if this type of project is allowed in your area.How Do I Know If I Need a Replacement or Entirely New Window Installed?
The best way to know if you need a replacement or new construction window is to ask a contractor to inspect your home. Over 80% of replacements are done with retrofit or slide-in types. But if there is significant damage to your walls, framing or siding, you may be better off putting a new construction unit in.Hire a Window Installation Contractor
Getting a Free Quote from an Installer Near You
There are so many variables in window installation that it should always be left to a professional. Quotes are always free, and you get at least three before proceeding. Find a window installer near you today.
Was this page helpful?
Was this page helpful?
Thank you for submitting your feedback.
The second time we replaced 3 windows with a different company. We paid $600 and we hate them. Sadly no refunds or replacements. 90 day warranty on labor and 2 years on windows.
The third time we used the first company. We replaced a 9 foot bay window and paid $1803. We received the same warranty as mentioned above. We are truly happy with Mako Management and would strongly recommend them