How much will your project cost? Get Estimates Now

How Much Does it Cost to Repair a Wood Fence?

Repair a Wood Fence Costs
Average reported costs
$522
based on 5,268 cost profiles
Most homeowners
spent between
$293 - $785
Low cost
$150
High cost
$1,300
YOUR NEXT STEP

Find out how much your project will cost

Get Your Estimates Now
Provide a few details about your project and receive competitive quotes from local pros.
Browse All Project Categories

Staining, power washing and maintaining your wood fence on a regular basis helps to protect it against the elements and last for longer. However, you will have to perform repairs when mold, termites or climate have a negative effect on the fence. The repairs that you will have to perform on your wood fence will be determined by the extent of the damage, the type of wood, extent of damage and other factors that your fencing contractor will be able to determine. Here?s more information about the kind of influences that cause wood fence damage and what goes into determining wood fence repairs.

Shifting Ground under Fence

Soil can shift because of snow and rain which can cause the fence posts to shift and sag. This causes the entire fence to be compromised and require repair. That?s why it is best to install fence posts at least three feet underground to ensure they aren?t as affected by shifting soil. If your fence posts aren?t installed this deep, you can run a string across the top of the fence to check if they?re level. If the string doesn?t remain straight, it?s a good indication you?ll need to have the fence realigned and posts installed deeper to avoid future repairs.

Wood Posts and Rail Damage

Wood fences are composed of posts and rails. Posts run vertically, while rails run horizontally and both can be damaged by a variety of factors. For example, posts can be broken by high winds, or they are destroyed by termites and beetles in certain parts of the United States. Rails, on the other hand, are susceptible to rot and insect damage as well. Repairing them varies by the design of the fence and the type of wood, but homeowners should not attempt to do it themselves, especially with the rails. Rails help to reinforce the posts, and if it?s repaired incorrectly, more posts could easily break off or fall backwards from high wind conditions.

Wood Fence Rot

Wood is naturally susceptible to rot as a result of exposure to the elements. Homeowners have the option to repair this by patching and supporting the posts or rails with rot. Depending on the extent of rot, homeowners will need to completely replace the support panels and boards, which will cost more but last longer against climate conditions. There are some species of wood that will handle moisture better like cedar and redwood, but they are more expensive. You can also buy wood fence types that are not waterproof but can be treated with a stain or paint to increase their durability.

Wood Holes and Cracks

Because of termites and climate conditions, wood fences will develop holes and cracks over time. They do not always have to be replaced though. Instead, boards, panels and slats can be patched or refinished if the hole or crack isn?t too extensive. If it?s too extensive and compromises the integrity of the fence, the piece will need to be taken out and replaced. That?s why homeowners should have extra pieces of the same kind of wood on-hand in their garage, in case they need to patch their fence at any time and not have a mismatched piece in their fence.

Wood Fence Weather Damage

To maximize the durability of the fence, homeowners should add stains or paint to the wood to protect it from weather damage for as long as possible. Whichever type of stain or paint you add to the fence will determine how long it lasts against the elements, other than wind or termite damage it will endure. Make sure you power-wash the surface of the fence before applying the stain or paint, as it will not adhere properly otherwise because of dirt or dust buildup.

Sagging Wood Fence Posts & Gate

Fence posts sometimes sag because their base rots below the ground level, but that doesn?t mean they have to be replaced. Rather homeowners dig out the ground around it, put it in the correct upright position and pour concrete around the base to hold it correctly in place again. Another way to correct the sag is to install a diagonal brace to prop it up, using concrete to hold the brace and post.

Sagging gates also sometimes occur because of their surrounding posts sagging in the ground or because of its parts failing in some way. It can also sag because its heaviness forced the frame out of alignment. To fix this, a homeowner must install a tension rod with a turnbuckle adjustment. Another way to fix a misaligned gate is to remove it from the hinges and attach a new wood diagonal bracing to hold it back in place.

Wood Replacement Panels

Missing fence panels occur because of wind, storms or rot over time due to moisture. They will need to be replaced as a result, and the cost varies depend on the type of wood and stain used when they were first installed. If more than one panel is missing, the cost will also increase depending on number of panels and labor required to install them. It?s best to call a professional to reinstall the missing panels, especially if there?s more than one that needs to be replaced.

Wood Gate Repairs

When gates are first installed, they are strong, handle all the opens and closes from people going in and out of the backyard. Over time though, hinges can become creaky, latches won?t catch, and the gate loses its effectiveness.

A wooden gate?s hinges can become a problem if it sags. Even if the posts are set in concrete, it can drag against the hinges because the posts give into the weight of the gate over time. To repair this, a professional will put a small wheel underneath the moving part of the gate. The wheel will take the full support of the gate and allow its hinges to move smoothly again.

Some wood gates have latches that work with a handle that is pulled or pushed. Sometimes when posts shift though, latches no longer reach which means the gate won?t close. Homeowners can fix this by nailing boards on both sides of the latch hole. Then the latch can go between the boards, catch and close the gate without a problem.

Factors that Affect Wood Fence Repair

Wood Fence Height

Fence height will be different depending on local city codes and what homeowner expectations are for the front or backyard. On an average basis, local front yard codes for residential areas are between 3 and 4 feet in height, and backyard or side yard fences can be around 6 feet in height. So homeowners who will need to repair their wood fences will need to consider repair costs depending on heights around those numbers.

Amount of Damage

The amount of damage to the wood fence will determine cost, depending on the type of wood it is and how much of it has been damaged. For example, pressure-treated wood has many preservatives so it will last almost indefinitely. Along those same lines, cedar and redwood stand up well underground and will not need much in the way of stain or paint to handle the elements compared to other wood types. If homeowners invest in these kinds of materials, they?re less likely to have extensive amounts of damage. If they invest in less expensive wood materials, they might have greater amount of damage which could mean more extensive repairs at a higher cost.

Supporting Structure

Since fence posts provide support to the rails and panels of the wood fence, they will be the main area that will need repair should they ever break or rot. If an undamaged post moves out of its regular position because of weather conditions or any other reason, it will need to be reset in a concrete foundation or deeper in the ground. Damaged posts will either need to be patched, refinished or replaced, depending on the extent of damage and how it affects the rest of the fence. The type of damage, labor, number of posts and wood type will factor into the total cost to repair this supporting wood fence structure.

Concrete Foundation

Homeowners have the option to set their wooden posts in a concrete foundation or not. If homeowners do set their wooden posts in a foundation, they will have to dig up the old fence post and the old foundation should it ever need to be replaced. Then they will have to pour a new concrete foundation and set the post in an upright position with a brace while it dries. Another option for homeowners is to dig around the broken or rotten post and cut it with a saw. They can take out that part, put in a new post right above where the old one was and then pour concrete right above the old concrete foundation. This could be expensive though, and it might not put your post at three feet underground, which could increase its risk of breaking due to high winds or climate conditions.

Was this page helpful?

Was this page helpful?

How could this page be more helpful?


Share your cost experience

Help others plan and budget for their projects

ROBERT SIMMONS More than 1 year ago
my plan is to remove each panel and post cut post even with ground level repour concert add brace reinstall post and panel.
frank portillo 12 months ago

I sure say wood gate is 3.5 x 6 ft


frank portillo 12 months ago

the wood fence to replace is 3.5 x 6 ft


frank portillo 12 months ago
the plan is to replace the wood gate
Michael Hearn More than 1 year ago
I live outside the city limits of Callahan Florida. I have a 125 ft across the front yard 6 ft. high 
The fence is made out of  lattace . The hurricane damaged parts of the fence. I need a trust worthy bonded insured licensed contracter to fix it. the fence is 100 ft deep.
DAVID SWAUGER More than 1 year ago
I USED THIS SERVICE FOR MY YARD CLEANUP AND THEY RECOMMENDED A COMPANY AND THEY WERE EXCELLENT
Joyce Rohlsen More than 1 year ago
I really learned a lot about wood fences. I just hope that with this knowledge I will be able to have an educated judgment  on how my project will evolve..
Louise Cronian More than 1 year ago
Patrick's Home And Deck Restoration put in a fence, did not finish, one front side is not done and the other front side is on backwards not according to code.  He did not do a good job and some of the fence is white.  We asked for the vinyl white and he said cost to much and paid him 3000 plus labor plus building the deck is horrible and not finished.  He was glad to take our money but not finish.  We did not get what we asked for so I NEED someone to finish side so I can open close and turn the other side around in front just one tier I guess like a gate opening around to Utica code.  We also need deck finished.  Can someone look and help it will be coming out of his picket when i am done.
Michael Hearn More than 1 year ago
Never pay someone before the job is finished. I learned the hard way.
Legal action can be taken against shady contractors.

Find Wood Fence Repair Contractors Near You